When it comes to designing parking garages, providing vision and transparency might not be the priority due to fire rated code requirements – but keen architects with grand visions see opportunities rather than restrictions, thanks to the advances in fire rated glass and framing technology.
An example of this advanced technology is SuperLite II-XL in GPX Framing by SAFTI FIRST, a USA-made fire resistive transparent wall system that blocks radiant heat and meets the same stringent ASTM E-119/ UL 263/ NFPA 251 code requirements that any opaque fire rated wall must meet. This allows architects and engineers to effectively replace entire walls with glass to open up buildings like never before, even when the code requires a fire rated wall. This strategy applies to both commercial and residential settings, as illustrated by the examples below.
Commercial Applications: Safe and Secure Separations
For projects that require a fire rated wall separation between a market or a business and a parking garage, designers can refer to the 2012 IBC Tables 716.5 and 716.6 for opening protection guidance.
For Gelson’s Market in Los Angeles (pictured above), the architect was able to provide 45-minute openings in a 1-hour wall between the grocery store and the parking garage by using SuperLite II-XL 45 in GPX Framing. Patterned glass was specified to create visually intriguing openings: clear SuperLite II-XL 45 was used for the main vision panels, with satin etch SuperLite II-XL 45 in the top lites and patterned SuperLite II-XL 45 in the bottom lites.
When the code requires that the fire rated assembly be rated equal to the wall, or when the design calls for floor-to-ceiling and wall-to-wall expanses of fire rated glazing, SuperLite II-XL 60 and 120 minute in GPX Framing can be used. In the case of Weill Cornell Medical College in New York City (pictured below), the architect specified 2-hour fire resistive walls between the building and the adjacent parking garage. SAFTI FIRST supplied SuperLite II-XL 120 IGU in GPX CW Framing with SuperLite II-XL 90 IGU in GPX Door Framing to meet ASTM E-119 requirements and provide a consistent look with the non-rated systems used in the same building.
Residential Applications: Turning a Garage into a Showroom
To some people, an automobile is more than just a car – it is an interdependent network of machinery and technology, wrapped in a meticulously prototyped exterior and furnished with a luxurious leather interior. Akin to good architecture, a well-designed automobile deserves a place of pride where it can be admired.
For private residences, the requirements for dwelling/garage fire separations are similar in both the International Building Code (IBC) and the International Residential Code (IRC), informing that rooms adjacent to attached garages are required to be separated with a certain level of fire protection. The codes then specify requirements for the gypsum board or equivalent that will ensure adequate fire separations, and clear fire rated walls can also be used in these cases.
Seeming to take visual cues from the residence of Tony Stark (a.k.a. Iron Man), this luxury residence in Beverly Hills (pictured below) required an unobstructed view from the living areas into the garage. To achieve this, the design team specified 1-hour fire rated glazing to span wall-to-wall and floor-to-ceiling. SAFTI FIRST provided SuperLite II-XL 60 with Starphire Ultra-Clear low iron glass in GPX Framing for the wall and HMTR Framing for the door, in order to meet the fire resistive code requirements with the highest clarity available and give unhindered views.
If you have an upcoming commercial or residential garage project, contact your local SAFTI FIRST representative to explore how clear fire rated walls might help you to create a more open design!
Related Stories
| May 24, 2012
2012 Reconstruction Awards Entry Form
Download a PDF of the Entry Form at the bottom of this page.
| Apr 3, 2012
Product Solutions
Two new PV systems; a lighter shelf; and fire alarm/emergency communication system.
| Feb 6, 2012
Siemens gifts Worcester Polytechnic Institute $100,000 for fire protection lab renovation
Siemens support is earmarked for the school’s Fire Protection Engineering Lab, a facility that has been forwarding engineering and other advanced degrees, graduating fire protection engineers since 1979.
| Feb 2, 2012
Fire rated glazing helps historic university preserve its past
When the University embarked on its first major addition since the opening of Hutchins Hall in 1933, preserving the Collegiate Gothic-style architecture was of utmost importance.
| Jan 26, 2012
Siemens launches smoke detection knowledge center
New knowledge center web site demonstrates efficacy of smoke detection.
| Dec 29, 2011
Decision not to fireproof the new World Trade Center Transportation Hub criticized
Some criticized the decision, reasoning that the structure could be a terrorist target.
| Oct 19, 2011
System for installing grease duct enclosures achieves UL listing
Updated installation results in 33% space savings.
| Sep 12, 2011
Morgan Thermal Ceramics’ system for installing grease duct enclosures achieves UL listing
Updated installation results in 33% space savings.
| May 4, 2011
SAFTI FIRST to debut free apps for iPhone, iPod Touch, and iPad at AIA Convention
SAFTI FIRST, manufacturer of fire rated glass and framing solutions, will debut its mySAFTI app, the first interactive design tool that takes the guesswork out of choosing the correct fire rated glass product, at the AIA National Convention in New Orleans, May 12-14. Visit booth1634.
| Feb 10, 2011
7 Things to Know About Impact Glazing and Fire-rated Glass
Back-to-basics answers to seven common questions about impact glazing and fire-rated glass.
