When it comes to designing parking garages, providing vision and transparency might not be the priority due to fire rated code requirements – but keen architects with grand visions see opportunities rather than restrictions, thanks to the advances in fire rated glass and framing technology.
An example of this advanced technology is SuperLite II-XL in GPX Framing by SAFTI FIRST, a USA-made fire resistive transparent wall system that blocks radiant heat and meets the same stringent ASTM E-119/ UL 263/ NFPA 251 code requirements that any opaque fire rated wall must meet. This allows architects and engineers to effectively replace entire walls with glass to open up buildings like never before, even when the code requires a fire rated wall. This strategy applies to both commercial and residential settings, as illustrated by the examples below.
Commercial Applications: Safe and Secure Separations
For projects that require a fire rated wall separation between a market or a business and a parking garage, designers can refer to the 2012 IBC Tables 716.5 and 716.6 for opening protection guidance.
For Gelson’s Market in Los Angeles (pictured above), the architect was able to provide 45-minute openings in a 1-hour wall between the grocery store and the parking garage by using SuperLite II-XL 45 in GPX Framing. Patterned glass was specified to create visually intriguing openings: clear SuperLite II-XL 45 was used for the main vision panels, with satin etch SuperLite II-XL 45 in the top lites and patterned SuperLite II-XL 45 in the bottom lites.
When the code requires that the fire rated assembly be rated equal to the wall, or when the design calls for floor-to-ceiling and wall-to-wall expanses of fire rated glazing, SuperLite II-XL 60 and 120 minute in GPX Framing can be used. In the case of Weill Cornell Medical College in New York City (pictured below), the architect specified 2-hour fire resistive walls between the building and the adjacent parking garage. SAFTI FIRST supplied SuperLite II-XL 120 IGU in GPX CW Framing with SuperLite II-XL 90 IGU in GPX Door Framing to meet ASTM E-119 requirements and provide a consistent look with the non-rated systems used in the same building.
Residential Applications: Turning a Garage into a Showroom
To some people, an automobile is more than just a car – it is an interdependent network of machinery and technology, wrapped in a meticulously prototyped exterior and furnished with a luxurious leather interior. Akin to good architecture, a well-designed automobile deserves a place of pride where it can be admired.
For private residences, the requirements for dwelling/garage fire separations are similar in both the International Building Code (IBC) and the International Residential Code (IRC), informing that rooms adjacent to attached garages are required to be separated with a certain level of fire protection. The codes then specify requirements for the gypsum board or equivalent that will ensure adequate fire separations, and clear fire rated walls can also be used in these cases.
Seeming to take visual cues from the residence of Tony Stark (a.k.a. Iron Man), this luxury residence in Beverly Hills (pictured below) required an unobstructed view from the living areas into the garage. To achieve this, the design team specified 1-hour fire rated glazing to span wall-to-wall and floor-to-ceiling. SAFTI FIRST provided SuperLite II-XL 60 with Starphire Ultra-Clear low iron glass in GPX Framing for the wall and HMTR Framing for the door, in order to meet the fire resistive code requirements with the highest clarity available and give unhindered views.
If you have an upcoming commercial or residential garage project, contact your local SAFTI FIRST representative to explore how clear fire rated walls might help you to create a more open design!
Related Stories
Sponsored | | Sep 4, 2014
Learning by design: Steel curtain wall system blends two school campuses
In this the new facility, middle school and high school classroom wings flank either side of the auditorium and media center. A sleek, glass-and-steel curtain wall joins them together, creating an efficient, shared space. SPONSORED CONTENT
| Aug 25, 2014
Glazing plays key role in reinventing stairway design
Within the architectural community, a movement called "active design" seeks to convert barren and unappealing stairwells originally conceived as emergency contingencies into well-designed architectural focal points. SPONSORED CONTENT
Sponsored | | Aug 16, 2014
Fire-rated framing system makes the grade at Johnson & Wales University Center
The precision engineering of TGP’s Fireframes Aluminum Series creates narrow profiles and crisp sightlines at Johnson & Wales University Center for Physician Assistant Studies
Sponsored | | Aug 8, 2014
Safe and secure: Fire and security glazing solution for Plaquemines Parish Detention Center
When the designers at L. R. Kimball looked for an all-in-one clear, wire-free glazing solution that protects against fire, bullets and forced entry for the new Plaquemines Parish Detention Center, SAFTI FIRST supplied a complete single-source tested and listed assembly that was easy to install and maintenance-free.
Sponsored | | Jul 7, 2014
Channel glass illuminates science at the University of San Francisco
The University of San Francisco’s new John Lo Schiavo Center for Science and Innovation brings science to the forefront of academic life. Its glossy, three-story exterior invites students into the facility, and then flows sleekly down into the hillside where below-grade laboratories and classrooms make efficient use of space on the landlocked campus.
| May 27, 2014
Fire Rated Glass contributes to open lab environment at JSNN
Openness and transparency were high priorities in the design of the Joint School of Nanoscience & Nanoengineering within the Gateway University Research Park in Greensboro, N.C. Because the facility’s nanobioelectronics clean room houses potentially explosive materials, it needed to be able to contain flames, heat, and smoke in the event of a fire. SPONSORED CONTENT
Sponsored | | May 3, 2014
Fire-rated glass floor system captures light in science and engineering infill
In implementing Northwestern University’s Engineering Life Sciences infill design, Flad Architects faced the challenge of ensuring adequate, balanced light given the adjacent, existing building wings. To allow for light penetration from the fifth floor to the ground floor, the design team desired a large, central atrium. One potential setback with drawing light through the atrium was meeting fire and life safety codes.
| Apr 25, 2014
Recent NFPA 80 updates clarify fire rated applications
Code confusion has led to misapplications of fire rated glass and framing, which can have dangerous and/or expensive results. Two recent NFPA 80 revisions help clarify the confusion. SPONSORED CONTENT
| Apr 8, 2014
Fire resistive curtain wall helps The Kensington meet property line requirements
The majority of fire rated glazing applications occur inside a building to allow occupants to exit the building safely or provide an area of refuge during a fire. But what happens when the threat of fire comes from the outside? This was the case for The Kensington, a mixed-use residential building in Boston.
Sponsored | | Jan 30, 2014
Transparent, fire rated stairwell enhances design of renovated Cincinnati Art Museum
When the Cincinnati Art Museum embarked on an $11 million renovation, the architects wanted the entrance and main stair to be as inviting as possible. Transparent, fire rated glazing from SAFTI FIRST was a key component of the design solution.
