flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

Construction material prices drop slightly in April, extending the decline

Construction material prices drop slightly in April, extending the decline


By Jim Haughey, BD+C Economist and Chief Economist with Reed Construction Data | August 11, 2010
This article first appeared in the 200906 issue of BD+C.

The construction materials price index for nonresidential buildings fell 0.3% in April extending the decline since the September index peak to 13.1%. Prices for the mix of materials used in nonresidential construction prices are back to the December 2007 level before the 14% jump in prices from March through September.

The materials price index is expected to decline slowly for a few more months but be rising modestly again by the end of the year and rising more quickly next year, perhaps up 4–5% from the 2009 average.

April's price drop was led by structural steel (7.3%) and plywood (-3.3%). The only significant April price increases were for diesel (20.5%) and nonferrous pipe and tube (20.9%) which had both declined in March. Rising scrap and ore prices mean rising nonferrous product prices for at least several months. The Energy Department reports that diesel pump prices were unchanged from the April to the May price survey week.

Percent Change in ..... 1 month 3 months 12 months 3 years
Source: Producer Price Index. Bureau of Labor Statistics
Construction commodities
Cement 0.8 -0.2 0.0 6.1
Construction sand, gravel & crushed stone 0.5 1.4 5.5 23.1
Softwood plywood -3.3 -4.9 -12.7 -21.1
Softwood lumber 1.6 -2.6 -10.7 -32.5
Manufactured materials
Gypsum products -0.2 -1.2 5.3 -17.5
Diesel fuel 20.5 -2.6 -56.2 -30.6
Paint 0.1 0.1 12.4 22.5
Plastic construction products -0.5 -0.6 3.0 1.9
Vitreous plumbing fixtures 2.3 2.4 4.2 -1.9
Ceramic tile -2.0 -1.4 -0.2 1.6
Flat glass -0.4 -1.0 2.9 2.7
Hot-rolled bars, plates, and structural shapes -7.3 -15.7 -25.9 -2.0
Extruded aluminum rod, bar, and other shapes 1.2 -4.3 -26.3 -18.2
Architectural metalwork 0.6 -2.4 12.1 24.7
Metal plumbing fixtures 0.5 0.2 2.2 13.1
Builders' hardware 0.5 -2.7 6.8 20.4
Sheet metal products -0.6 -3.6 0.2 9.9
Nonferrous pipe and tube 20.9 26.7 -28.5 -1.3
Building brick 0.5 -0.2 0.1 0.8
Ready-mix concrete -1.0 -1.9 3.4 10.7
Concrete block and brick 0.3 -0.1 3.3 10.1
Millwork (window, door, cabinet) -0.2 0.7 1.7 5.3
Engineered wood products -1.3 -3.3 -2.6 -14.6
Metal doors, sash, and trim -0.8 0.2 5.4 9.2
Summary
Construction materials (commodity level) -2.3 -3.1 -1.7 4.9
Inputs to construction industries -0.4 -1.6 -3.6 6.4
Inputs to nonresidential construction -0.3 -1.6 -5.2 6.3

Related Stories

AEC Innovators | Feb 28, 2023

Meet the 'urban miner' who is rethinking how we deconstruct and reuse buildings

New Horizon Urban Mining, a demolition firm in the Netherlands, has hitched its business model to construction materials recycling. It's plan: deconstruct buildings and infrastructure and sell the building products for reuse in new construction. New Horizon and its Founder Michel Baars have been named 2023 AEC Innovators by Building Design+Construction editors.

Sustainability | Feb 8, 2023

A wind energy system—without the blades—can be placed on commercial building rooftops

Aeromine Technologies’ bladeless system captures and amplifies a building’s airflow like airfoils on a race car.

Mass Timber | Jan 27, 2023

How to set up your next mass timber construction project for success

XL Construction co-founder Dave Beck shares important preconstruction steps for designing and building mass timber buildings.

Concrete | Jan 24, 2023

Researchers investigate ancient Roman concrete to make durable, lower carbon mortar

Researchers have turned to an ancient Roman concrete recipe to develop more durable concrete that lasts for centuries and can potentially reduce the carbon impact of the built environment.

Standards | Jan 19, 2023

Fenestration Alliance updates liquid applied flashing standard

The Fenestration and Glazing Industry Alliance (FGIA) published an update to its Liquid Applied Flashing Standard. The document contains minimum performance requirements for liquid applied flashing used to provide water-resistive seals around exterior wall openings in buildings.

Products and Materials | Jan 18, 2023

6 innovative products for multifamily developments

Here are six innovative products for various multifamily developments, including a condominium-wide smart electrical system, heavy-duty aluminum doors, and prefabricated panels.

Products and Materials | Jan 18, 2023

Is inflation easing? Construction input prices drop 2.7% in December 2022

Softwood lumber and steel mill products saw the biggest decline among building construction materials, according to the latest U.S. Bureau of Labor Statistics’ Producer Price Index. 

ProConnect Events | Jan 17, 2023

3 ProConnect Single Family events for Home Builders and Product Manufacturers set for 2023

SGC Horizon, parent company of ProBuilder, will present 3 ProConnect Single Family Events this year. At ProConnect Single Family, Home Builders meet in confidential 20-minute sessions with Building Product Manufacturers to discuss upcoming projects, learn about new products, and discover practical solutions to technical problems.

75 Top Building Products | Nov 30, 2022

75 top building products for 2022

Each year, the Building Design+Construction editorial team evaluates the vast universe of new and updated products, materials, and systems for the U.S. building design and construction market. The best-of-the-best products make up our annual 75 Top Products report. 

Building Materials | Nov 2, 2022

Design for Freedom: Ending slavery and child labor in the global building materials sector

Sharon Prince, Founder and CEO of Grace Farms and Design for Freedom, discusses DFF's report on slavery and enforced child labor in building products and materials.

boombox1 - default
boombox2 -
native1 -

More In Category




halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021