The new Sharpsburg Community Library in Sharpsburg, Pa., is making a splash in this small town a few miles north of Pittsburgh. Instead of the one-story concrete block building library patrons previously frequented, they now have a vivid, multi-colored facility that has become a highlight of the town.
The architectural design, created by Front Studio Architects in Pittsburgh, offers an exterior featuring bold geometric shapes and bright colors. “It would be hard to miss the building’s new design,” said library director Kathy Amrhein. Front Studio principal Art Lubetz elaborated, saying, “Color is the easiest button to push to get an emotional response.”
Front Studio Architects initially was hired to design an addition on the back of the existing library building. “But it was such an unattractive structure that we just couldn’t do it. So we came up with the idea of literally surrounding the building with simple, elemental blocks that would be individually colored so that we would have this pulsating, dynamic structure,” Lubetz said.
Approximately 2,600 sq. ft. of PAC-CLAD 7/8” Corrugated Panels in five different colors was just what the design team was looking for. The .032” aluminum panels were finished in Copper Penny, Silver, Cardinal Red, Award Blue and Patina Green.
The decision to use metal as the primary exterior façade material was made fairly early in the design process. “As soon as we knew we wanted the building to be colorful, metal became the obvious choice for the exterior,” Lubetz said. “We had an extremely minimal budget for the project. PAC-CLAD corrugated metal would be the most economical, long-lasting material we could use. We got involved with Petersen because we like their colors. The contractor bid it out and the price was right.”
Durability and low maintenance were key factors, too. “The longevity of the product was important,” Lubetz said. “This is a little tiny library with little tiny budgets. We knew the PAC-CLAD corrugated wouldn’t require much attention in terms of maintenance. That’s another strong reason we used it.”
Installation of Petersen’s PAC-CLAD material was done by general contractor Franjo Construction in Pittsburgh. Project manager Skip Stein likes the look of the new building. “It certainly sets itself apart from the other construction in the area. It’s almost an amusement park appearance that the kids really like. The architect really did a nice job of mixing and matching the colors,” Stein said.
Corrugated metal continues to be a popular architectural material, Stein notes. “We see corrugated popping up all over the place. This job was relatively straightforward, although the building was irregular and didn’t have many 90-degree corners. That made installation of some of the outside corners a little challenging. But the corrugated really turned out great.”
Architect Lubetz agreed. “I couldn’t be happier with the way the project turned out. And the use of the PAC-CLAD had a lot to do with it,” he said.
The Petersen distributor on the project was Brock Associates in Pittsburgh.
Petersen is long-recognized for its PAC-CLAD metal standing seam roofing products, and also offers metal wall panels including exposed fastener panels, flush panels, composite wall panels, fascia and coping systems, and column covers. All provide the well-known Petersen quality and are available in full 70% PVDF finish in 45 colors on steel and aluminum. Most colors meet LEED, Energy Star and Cool Roof Rating Council certification requirements.
For more information on the complete line of Petersen metal products, call 800-PAC-CLAD or visit pac-clad.com.
Related Stories
| Feb 27, 2014
Metal Construction Association introduces two Environmental Product Declarations
Two Environmental Product Declarations (EPD), one for Metal Composite Material Panels and one for Roll Formed Steel Panels for Roofs and Walls, are now available free of charge from the Metal Construction Association (MCA) on its website.
| Feb 19, 2014
AIA class: The ABCs of IMPs – How to design and build with insulated metal panels
This AIA/CES class offers insight in areas including policies and codes surrounding insulated metal panels, contributions from LEED and tax credits, energy modeling, and business development opportunities available with IMPs. Take this course and earn 1.0 AIA LU/HSW/SD.
| Feb 13, 2014
Why you should start with a builder
They say the best way to eat an elephant is one bite at a time. Expanding your building or constructing a new structure for your business, church, or school isn’t all that different. Attacking it is best done in small, deliberate pieces.
| Feb 6, 2014
New Hampshire metal building awes visitors
Visitors to the Keene Family YMCA in New Hampshire are often surprised by what they encounter. Liz Coppola calls it the “wow factor.” “Literally, there’s jaw dropping,” says Coppola, director of financial and program development for the Keene Family YMCA.
| Feb 5, 2014
CENTRIA Redefines Coating System with Versacor® Elite
The Versacor Elite Coating System is a premium metal coating system that provides the highest level of protection in the harshest climatic or environmental conditions.
| Jan 30, 2014
What to expect in the metal building industry in 2014
Every year brings changes. This one won’t be any different. We’ll see growth in some areas, declines in others. Here’s a little preview of what we’ll be writing about 2014 when 2015 comes rolling in.
| Jan 28, 2014
White Paper: How metal buildings deliver long-term value to schools
A new white paper from Star Building Systems outlines the benefits of metal buildings for public and private school building projects.
| Jan 23, 2014
Think you can recognize a metal building from the outside?
What looks like brick, stucco or wood on the outside could actually be a metal building. Metal is no longer easily detectable. It’s gotten sneakier visually. And a great example of that is the Madison Square retail center in Norman, Okla.
| Jan 13, 2014
Custom exterior fabricator A. Zahner unveils free façade design software for architects
The web-based tool uses the company's factory floor like "a massive rapid prototype machine,” allowing designers to manipulate designs on the fly based on cost and other factors, according to CEO/President Bill Zahner.
| Dec 16, 2013
Is the metal building industry in a technology shift?
Automation is the future you can’t avoid, though you may try. Even within the metal building industry—which is made up of skilled tradesmen—automation has revolutionized, and will continue revolutionizing, how we work.
