flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

Multifamily Amenities Survey 2021: Get the latest data on 131 key features for apartments and condos

Multifamily Housing

Multifamily Amenities Survey 2021: Get the latest data on 131 key features for apartments and condos

Study also evaluates Covid-19 impact on amenities and multifamily developers' adoption of smart connectivity systems.


By ROBERT CASSIDY, EDITOR, MULTIFAMILY DESIGN+CONSTRUCTION | June 6, 2021
MULTIFAMILY HOUSING AMENITIES SURVEY 2021

The exclusive 2021 Multifamily Amenities Study describes which of 131 amenities more than 300 developers, architects, and contractors implemented in the last two years.

The new edition of MULTIFAMILY Design+Construction's "Amenities Survey" provides the latest data on 131 goodies that developers, architects, and contractors have been specifying for their multifamily projects.

To get your personal copy, go to: www.BDCnetwork.com/Amenities2021 (short registration required).

The 2021 survey, which builds on data from previous studies in 2017 and 2019, also asked respondents how they were coping with the impact of the Covid-19 pandemic.

 


Thanks to our 2021 Multifamily Amenities Study sponsor: EXACOR™ | Huber Engineered Woods

EXACOR_Black_RGB_0.png


 

Covid impact 2020-21.png
Many respondents took a variety of actions to deal with the effect of the Covid-19 pandemic on their multifamily properties.

 

A new question asked respondents about smart "connectivity" systems. Many said this responsibility was an "after-market" extra controlled by the owner or developer:

Smart Systems 2021.png
Xfinity Communities was the leader in smart connectivity. More than a third said they did not install smart connectivity systems. That was something the owner did.

 

PROCONNECT FALL 2021 SCHEDULE

ProCONNECT is a series of events that bring Developers, Architects, and Contractors together with Building Product Manufacturers for one-on-one discussions about Attendees' upcoming projects and potential solutions from the Manufacturers.

This fall, four ProCONNECTs will be presented – two of them (ProCONNECT Single-Family and ProCONNECT Multifamily) "live" at exclusive venues. 

Two new ProCONNECTs will debut this fall: ProCONNECT Sustainaibility | Wellness | Resilience and ProCONNECT Education (PreK-12 to University).

To learn how to participate as an Attendee or Sponsor, go to: ProCONNECT Fall 2021 Schedule.

ProConnect Fall schedule.png

 

CHECK OUT BACK ISSUES OF MULTIFAMILY DESIGN+CONSTRUCTION

The past issues of MULTIFAMILY Design+Construction are a gold mine of intriguing multifamily housing project case studies, new products, feature articles on leading multifamily firms, and new technology and solutions.

To view all 11 back issues (2017-2020) at no cost, visit MFDC Back Issues.

 

MFDC Covers 2017-2020.png

MULTIFAMILY DESIGN+CONSTRUCTION serves developers, architects, designers, and contractors in the $93 billion multifamily sector.

Related Stories

| Aug 11, 2010

Housing America's Heroes 7 Trends in the Design of Homes for the Military

Take a stroll through a new residential housing development at many U.S. military posts, and you'd be hard-pressed to tell it apart from a newer middle-class neighborhood in Anywhere, USA. And that's just the way the service branches want it. The Army, Navy, Air Force, and Marines have all embarked on major housing upgrade programs in the past decade, creating a military housing construction boom.

| Aug 11, 2010

Loft Condo Conversion That's Outside the Box

Few people would have taken a look at a century-old cigar box factory with crumbling masonry and rotted wood beams and envisioned stylish loft condos, but Miles Development Partners did just that. And they made that vision a reality at Box Factory Lofts in historic Ybor City, Fla. Once the largest cigar box plant in the world, the Tampa Box Company produced boxes of many shapes and sizes, spec...

| Aug 11, 2010

World's tallest all-wood residential structure opens in London

At nine stories, the Stadthaus apartment complex in East London is the world’s tallest residential structure constructed entirely in timber and one of the tallest all-wood buildings on the planet. The tower’s structural system consists of cross-laminated timber (CLT) panels pieced together to form load-bearing walls and floors. Even the elevator and stair shafts are constructed of prefabricated CLT.

| Aug 11, 2010

CityCenter Takes Experience Design To New Heights

It's early June, in Las Vegas, which means it's very hot, and I am coming to the end of a hardhat tour of the $9.2 billion CityCenter development, a tour that began in the air-conditioned comfort of the project's immense sales center just off the famed Las Vegas Strip and ended on a rooftop overlooking the largest privately funded development in the U.

| Aug 11, 2010

Giants 300 Multifamily Report

Multifamily housing starts dropped to 100,000 in April—the lowest level in several decades—due to still-worsening conditions in the apartment market. Nonetheless, the April total is below trend, so starts will move progressively back to a still-depressed 150,000-unit pace by late next year.

| Aug 11, 2010

The softer side of Sears

Built in 1928 as a shining Art Deco beacon for the upper Midwest, the Sears building in Minneapolis—with its 16-story central tower, department store, catalog center, and warehouse—served customers throughout the Twin Cities area for more than 65 years. But as nearby neighborhoods deteriorated and the catalog operation was shut down, by 1994 the once-grand structure was reduced to ...

| Aug 11, 2010

Gold Award: Westin Book Cadillac Hotel & Condominiums Detroit, Mich.

“From eyesore to icon.” That's how Reconstruction Awards judge K. Nam Shiu so concisely described the restoration effort that turned the decimated Book Cadillac Hotel into a modern hotel and condo development. The tallest hotel in the world when it opened in 1924, the 32-story Renaissance Revival structure was revered as a jewel in the then-bustling Motor City.

boombox1 - default
boombox2 -
native1 -

More In Category


MFPRO+ News

World’s largest 3D printer could create entire neighborhoods

The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.



halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021