flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

Morgan Thermal Ceramics’ system for installing grease duct enclosures achieves UL listing

Morgan Thermal Ceramics’ system for installing grease duct enclosures achieves UL listing


By By BD+C Staff | September 12, 2011
The new system, an update to the existing classification, results in a 33% space saving.

 

 

 

 

 

 

 

 

 

Morgan Thermal Ceramics worked with UL Underwriter’s Laboratories Inc. to certify a new installation method for grease duct enclosures used in commercial construction.
The new system, an update to the existing classification, results in a 33% space saving. To obtain UL listing for the modified installation method, the company conducted extensive fire performance testing in accordance with ASTM E 2336.
The improved installation method is part of a complete system that includes all materials and the way the materials are installed. The wrapping system uses Morgan Thermal Ceramics’ FireMaster FastWrap XL products, which are installed using compression joints at all seams on both layers of a 2-layer grease duct system. Also included is the new FireMaster FastDoor XL UL-listed access door for grease ducts, which provides a safe and easy way to gain access to kitchen ducts for cleaning and inspection.
The system can be used in commercial construction and is expected to be widely used by mechanical HVAC contractors, insulation, mechanical, and general contractors, as well as duct designers and architects.
Other enclosures on the market use a minimum of 3-inch overlaps of blankets on seams or joints. The new system’s tight butt seam joint saves on material use, because there is no need for the double material thickness for the overlap. BD+C 

Related Stories

Sponsored | | Feb 28, 2018

Quality Products Needed To Meet Green Building Standards Today

Sustainable healthcare facilities will need energy-efficient building enclosures from the outset.

Sponsored | | Feb 15, 2018

Fact vs. fiction: Hotel waterproofing in coastal zones

Sign up for our free March 6 webinar on “A Project Peer Review: The Single Most Important Factor in Reducing the Risk of a Mold and Moisture Lawsuit in Your Next Project”.

Building Materials | Dec 19, 2017

‘Ultra Violet’ is Pantone’s Color of the Year 2018

The color represents a symbol of counterculture, unconventionality, and artistic brilliance, according to Pantone.

Sponsored | Building Materials | Aug 24, 2017

Controlling condensation

No matter what structural material you build with, be it steel, concrete, or wood, water is the enemy.  

Sponsored | Building Materials | Aug 17, 2017

Teflon’s little brother is breathing new life into big design

Lighter than glass and 100% recyclable, one material takes center stage in the future of building.

Concrete | Jul 7, 2017

The secrets held within Ancient Roman concrete could improve future building practices

Not only has the concrete stood the test of time, but it has actually become stronger.

boombox1 - default
boombox2 -
native1 -

More In Category


Codes and Standards

Updated document details methods of testing fenestration for exterior walls

The Fenestration and Glazing Industry Alliance (FGIA) updated a document serving a recommended practice for determining test methodology for laboratory and field testing of exterior wall systems. The document pertains to products covered by an AAMA standard such as curtain walls, storefronts, window walls, and sloped glazing. AAMA 501-24, Methods of Test for Exterior Walls was last updated in 2015. 



halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021