The town of Harrison was once a thriving center of industry, boasting countless chemical and metal product manufacturers. But until recently, the former center of this industrial activity lay vacant and forgotten. The mixed use Harrison Commons project is an early and essential step toward revitalizing this neglected area, ushering in a new chapter for the city.
A Place with Potential
The area is ideally located, with the nearby Harrison PATH Station providing access to lower Manhattan and Newark for over 6,500 weekday riders. The newly constructed Red Bull Arena and Prudential Center ensure that there will be no shortage of foot traffic in Harrison.
A Renaissance Begins
The efforts to rebuild the waterfront area began with a redevelopment plan approved in 2003 that allowed the land to be rezoned from industrial to mixed use and residential. The first building in this multiphase plan is Harrison Commons, designed by Minno & Wasko Architects and Planners. The project includes 275 residential units and 15,000 square feet of ground-floor retail space.
They chose ALPOLIC ACM panels with a champagne metallic finish for the exterior, joined with Fairfield Metal’s CFM system.
“It’s a fully sealed wet system with silicone sealing the joints. The system itself is proprietary, but it’s a pretty generic concept. We have our own extrusions for that system, but each fabricator will have something similar,” says Wojciech Siewior of Fairfield Metal LLC, the fabricators for the project.
Why wet seal rather than rainscreen? “It depends on where you want to seal the building, underneath the skin, or on the outside. It’s easier to do it on the outside rather than a rainscreen with a barrier underneath,” explains Siewior.
Up to the Task
Fairfield Metal was well prepared for fabricating the necessary panels for this development project. “It has been a very easy project for us. It’s kind of symmetrical, so all the sizes are fairly straightforward, so it was quick to measure and fabricate. It wasn’t challenging to us in any way,” says Siewior.
ALPOLIC helped make the project even simpler. “It’s always nice to have material all here all in one shot so we can go ahead and fabricate things right off the bat, so [ALPOLIC is] great with that so we don’t have to wait on the material.”
Just the Beginning
Harrison Commons represents the beginning of the process of revitalization. As developers set their sites on the surrounding empty fields and abandoned buildings, it’s sure to become a focal point of the city of Harrison’s rebirth.
Related Stories
| Apr 17, 2014
6 details that can throw off your schedule
In 1997, Apple told us to “Think Different.” So we did. We thought about what could happen if the world went mobile, if information was boundless, if we could carry our office in our back pocket. We’ve grown to love different and to expect change. And when it comes to Apple products, that’s not such a bad thing. When it comes to your building order, however, it’s not nearly as appealing.
| Apr 9, 2014
Steel decks: 11 tips for their proper use | BD+C
Building Teams have been using steel decks with proven success for 75 years. Building Design+Construction consulted with technical experts from the Steel Deck Institute and the deck manufacturing industry for their advice on how best to use steel decking.
| Apr 8, 2014
Reflecting on job number 61-001
Job number 61-001 changed everything. It was sold in 1961, a year of change for the nation and for Star. By January, John F. Kennedy would be president. By the end of the year, Star would launch a historic shift in our product and our distribution, a shift still active today.
| Mar 31, 2014
Tips for creating a competitive bid using codes and loads
Landing a project feels like winning a prize, sort of like finding that forgotten $20 bill in the pocket of a pair of jeans you haven’t worn in a while. But living on the “chance” of winning a job isn’t a great way to pay your electric bill. So, how do you swing the chances in your favor?
| Mar 26, 2014
A sales and service showcase
High Plains Equipment, a Case IH dealership in Devils Lake, N.D., constructs a larger facility to better serve its customers.
| Mar 19, 2014
Frames: the biggest value engineering tip
In every aspect of a metal building, you can tweak the cost by adjusting the finish, panel thickness, and panel profile. These changes might make a few percentage points difference in the cost. Change the framing and you have the opportunity to affect 10-20 percent savings to the metal building portion of the project.
| Mar 11, 2014
Why you should start with a builder, part three
We had worked together for 30 years. As a long-standing client of mine, he and I had gone through many projects together. And we were approaching another project, one that would forever change how he viewed our working relationship. As my customer and I sat down to talk about the project details, he told me something that would stay with me for weeks. “Kim, I’m going to have to get other bids on this just so I have peace of mind.”
Sponsored | | Mar 10, 2014
A high-performance barn
Bastoni Vineyards replaces a wooden barn with an efficient metal building used for maintenance, storage, and hosting events.
| Mar 4, 2014
CENTRIA Demonstrates Commitment to Contractors
New Brochure Highlights Architectural Metal Panel Manufacturer’s Products, Expertise and Experience
| Feb 27, 2014
Colorado Coalition Plans Welcoming Events for METALCON International Visitors
Visitors to the 24th METALCON International, slated for October 1-3 at the Colorado Convention Center in Denver, will get a royal welcome from local companies involved in the show. Denver-based New Tech Machinery and Colorado Springs-based S-5! Solutions have formed the Colorado Coalition as a way of encouraging visitors to learn about Colorado before they arrive and for Coloradans to experience METALCON.
