flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

ABC: Construction material prices rise again in May

Building Materials

ABC: Construction material prices rise again in May

Nonresidential construction price gains were largely driven by iron and steel prices and steel mill product prices.


By ABC | June 16, 2016

Steel rods. Photo: PortlandBolt/Creative Commons.

Construction input prices expanded by 0.7% in May and have now expanded for three consecutive months according to an analysis of the Bureau of Labor Statistics Producer Price Index released by Associated Builders and Contractors (ABC). The rise follows eight consecutive months during which construction input prices fell; prices remain 3.4% below their year-ago level. 

Nonresidential construction input prices expanded by 0.9% in May, but are still 3.5% below their year-ago level. Price gains were largely driven by iron and steel prices and steel mill product prices, which expanded 5.8% and 4.6% for the month, respectively. 

"After falling sharply during all of 2015 and into the early months of 2016, an increase in global commodities prices had to happen as markets firmed," said ABC Chief Economist Anirban Basu. "While much attention has been given to the recent rise in oil prices to around $50 per barrel, other commodity prices have also experienced a resurgence, including iron ore.  

"That said, the global economy continues to disappoint relative to expectations established at the start of the year," said Basu. "Higher prices may stimulate new rounds of production, including in energy markets, but the implication is that prices are unlikely to rise smoothly or dramatically going forward. Analyst views regarding the direction of commodity prices diverge wildly. While supply and demand play a role in fashioning commodity prices, so too does the value of the U.S. dollar. U.S. interest rates remain low and in many cases have been declining. The dollar has correspondingly weakened in recent weeks. Should that continue, commodity price increases could be sharper than we presently anticipate."

Nine key input prices expanded or remained unchanged in May on a monthly basis:

  • Crude petroleum prices expanded 0.6% from April 2016, but are down 32.5% from May 2015.
  • Unprocessed energy material prices expanded 0.9% on a monthly basis, but have fallen 23.1% on a year-ago basis. 
  • Prices for steel mill products expanded 4.6% from a month ago, but are down 5.2% on a yearly basis. 
  • Iron and steel prices expanded 5.8% month-over-month, but are down 2% year-over-year. 
  • Softwood lumber prices expanded 2.2% for the month and 6.3% from May 2016. 
  • Fabricated structural metal prices remained unchanged month-over-month and are down 1.9% year-over-year.
  • Prices for plumbing fixtures and fittings expanded 0.2% for the month and are up 0.3% from the same time last year. 
  • Prices for prepared asphalt and tar and roofing and siding products expanded by 0.4% month-to-month and 0.7% year-over-year. 
  • Natural gas prices rose 2.9% for the month, but are down 23.5% from the same period one year ago. 

Two key input prices declined on a monthly basis:

  • Nonferrous wire and cable prices fell 1.3% on a monthly basis and have fallen 9.2% on a yearly basis. 
  • Concrete product prices inched down by 0.1% month-over-month, but are up 3% year-over-year.

Related Stories

Sponsored | Glass and Glazing | Oct 1, 2021

Seizing the Daylight with BIPV Glass

Glass has always been an idea generator. Now, it’s also a clean energy generator.

Wood | May 14, 2021

What's next for mass timber design?

An architect who has worked on some of the nation's largest and most significant mass timber construction projects shares his thoughts on the latest design trends and innovations in mass timber.

3D Printing | Nov 27, 2020

The Fibonacci House: A test case of 3D construction printing

The Fibonacci House, which we have named after Leonardo Fibonacci, the medieval Italian mathematician, illustrates the potential of 3DCP and demonstrates how a complex design and challenging logistics can be solved through pragmatic planning and 3DCP technology.

Building Materials | Jul 5, 2020

A new report predicts significant demand growth for mass timber components

There should be plenty of wood, but production capacity needs to catch up.

Sponsored | Voice of the Brand | Jun 5, 2020

Practice Style Transcendence with Brick

Get inspired! Brick’s adaptability has made it the premier building material for centuries even as styles come and go. Nothing says “classic” like brick, but nothing says “innovative” like brick either. Check out some examples of how fired clay brick remains a major presence in the 21st Century designer’s palette.

Coronavirus | Apr 16, 2020

COVID-19: Pennsylvania building products supplier raises $1.2 million for Pittsburgh-area food bank

Pennsylvania building products supplier raises $1.2 million for Pittsburgh-area food bank.

boombox1 - default
boombox2 -
native1 -

More In Category


Codes and Standards

Updated document details methods of testing fenestration for exterior walls

The Fenestration and Glazing Industry Alliance (FGIA) updated a document serving a recommended practice for determining test methodology for laboratory and field testing of exterior wall systems. The document pertains to products covered by an AAMA standard such as curtain walls, storefronts, window walls, and sloped glazing. AAMA 501-24, Methods of Test for Exterior Walls was last updated in 2015. 



halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021