WoodWorks and Think Wood have released their first Mass Timber Design Manual. The free interactive resource offers a collection of information on topics including mass timber products, design best practices, and taller wood construction and sustainability.
“Mass timber inspires innovation. More and more, developers and designers are turning to mass timber to build everything from multifamily projects and commercial offices to signature public buildings and tall wood towers,” said Ryan Flom, chief marketing officer of the Softwood Lumber Board. “The market is advancing rapidly, and the Mass Timber Design Manual is designed to keep pace with it, providing timely and comprehensive information to support the design and build pros behind the next wave of mass timber buildings.”
The manual includes WoodWorks technical papers, Think Wood continuing education articles, project case studies, expert Q&As, technical guides and other helpful tools, including:
Insurance for mass timber construction
Cost and design optimization
Mass timber fire design
Acoustic and vibration design
Tall wood buildings in the 2021 IBC
Calculating carbon footprints
Impact of wood use on North American forests
Occupant well-being and biophilic design
Users can view each individual resource or download the master folder for all files in one location.
Related Stories
| Dec 22, 2011
Federal home weatherization program has impacted 6.8 million homes
More than 6.8 million homes have been weatherized using federal, state, utility, and other funds under the American Recovery and Reinvestment Act.
| Dec 22, 2011
Group developing BIM data standards
A collaboration among Georgia Tech’s Digital Building Lab, the Precast Concrete Institute, the American Concrete Institute, and the American Institute of Steel Construction aims to develop global standards for transportation of three-dimensional digital models among fabricator, architecture, engineering, and construction groups.
| Dec 22, 2011
New green code spells out thermal requirement for roof retrofits
The 2012 International Green Construction Code (IgCC) includes a straightforward approach to minimum thermal requirements for roof and wall systems.
| Dec 22, 2011
AGC’s safety conference Jan. 11-13 in San Antonio
The Associated General Contractors of America’s national meeting for safety and health professionals will take place Jan. 11-13, 2012 in San Antonio, TX.
| Dec 22, 2011
Proposed New York City zoning revamp encourages rooftop solar and wind energy
New zoning regulation proposals to make it easier for building owners in New York City to make their structures more sustainable have entered the public approval process.
| Dec 15, 2011
Dayton, Ohio schools saving $2.6 million annually by building to LEED
On average, green schools save about $100,000 a year on operating costs, including energy and water savings.
| Dec 15, 2011
Building to LEED standards can pose new risks for construction workers
Workers on these projects suffer a 24% increase in falls to lower levels during roof work, which researchers attributed to the installation of solar panels, and a few other risks.
| Dec 15, 2011
NRDC charges Maine governor with weakening green wood requirement
The FSC program is administered through the Leadership in Energy and Environmental Design (LEED) and requires wood to be harvested in a sustainable way.
| Dec 15, 2011
Post-tornado, Tuscaloosa seeks to create walkable urban, retail areas
Block sizes initially were limited to a maximum perimeter of 1,750 feet, with no side of the block being longer than 500 feet.
| Dec 15, 2011
Allentown, Pa. city council asked to repeal union-friendly law
The mayor of Allentown, Pa. asked the City Council to repeal a year-old ordinance that forces contractors to hire union workers for large city projects funded with state and federal dollars.
