flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

U.S. construction companies not embracing technology: KPMG survey

U.S. construction companies not embracing technology: KPMG survey

Contractors fall short on adopting robotics, drones, RFID technology, and mobile technology.


September 16, 2016
NEW YORK, Sept. 14, 2016 – U.S. construction companies are not embracing technological advancements, such as drone aircrafts, robotics, RFID equipment and materials tracking, and data analytics, according to KPMG International’s Global Construction Survey 2016, “Building a technology advantage (http://bit.ly/2d0zNSb).
 
The KPMG survey found that nearly half of organizations use multiple software platforms that are manually monitored, rather than a single, fully integrated project management information aystem (PMIS). When it comes to mobile technology and platforms, while most use remote monitoring on projects, 19% do not use mobile technology at all. Among those who do utilize mobile technology for projects, nearly 40% do not have them linked to an integrated system or broader enterprise-wide project management system.
 
“The survey responses reflect the industry’s innate conservatism towards technologies, with most firms content to follow rather than lead,” says Geno Armstrong, International Sector Leader, Engineering & Construction, KPMG in the U.S. “Many lack a clear technology strategy, and either adopt it in a piecemeal fashion, or not at all. The rapidly evolving infrastructure challenges of the next decade demands that both owners and engineering and construction firms embrace technology more strategically and at a far more rapid pace than in the past.”
 
In the KPMG study, two-thirds of respondents (67%) said they could not push one button on their desktop to obtain fully integrated real-time data on a project. Seventy percent do not use robotic or automated technology; most have no plans to use it in the future. In addition to traditional cost and schedule analytics, 65% do not use data analytics for any other aspects of their organizations’ projects.
 
“Integrated, real-time project reporting is still a myth, rather than a reality for most,” said Armstrong. “That’s largely because firms tend to use multiple software platforms that are manually monitored and disconnected, which severely compromises their effectiveness.”
 

A solid majority of respondents (61%) said their companies use building information modeling on projects.

On the bright side, 36% of construction executives surveyed said they felt construction has emerged from the recession and is starting to grow. Nearly a fourth (24%) said that things are looking up for all participants. Another 27% indicated that discrete segments are growing fast. Only 13% said they are seeing market declines or no growth in the past year.

 
Armstrong feels that embracing technology and innovation is a sure way to improve results. “Projects are becoming bigger, bolder and more complex – and with complexity comes risk,” he said. “Innovations like remote monitoring, automation and visualization have enormous potential to speed up project progress, improve accuracy and safety.”
 
About the survey
Building a technology advantage – Global Construction Survey 2016 highlights the views of over 200 senior executives from major project owners and engineering and construction companies – over 50 of which are in the U.S. The report looks at how the industry is embracing a range of technologies including data and analytics, robotics, drones, remote monitoring and visualization. The survey, now in its 10th year, includes both private companies and government agencies, with project owners from many industries including energy and natural resources, technology and healthcare. 

Related Stories

| May 22, 2012

O’Connell Robertson acquires Mitchell Design Consultancy

Mary Ann A. Mitchell, AIA, IIDA, MDC principal and founder, joins O’Connell Robertson as part of the acquisition.

| May 21, 2012

$61,000 awarded to students in Cleveland’s ACE Mentor Program

Mayor Frank G. Jackson gives keynote address at scholarship event for 80 Cleveland Metropolitan School District students involved in the ACE Mentor Program, which provides guidance and assistance for students interested in careers in the integrated construction industry.

| May 21, 2012

Wayne, Pa.'s Radnor Middle School wins national green award

Radnor Middle School among the most sustainable schools in the U.S.

| May 21, 2012

Winchester High School receives NuRoof system

Metal Roof Consultants attended a school board meeting and presented a sloped metal retrofit roof as an alternative to tearing off the existing roof and replacing it with another flat roof.

| May 17, 2012

EMerge Alliance forms new Campus Microgrid Technical Standards Committee

Intel leading the charge to connect multiple DC microgrids throughout commercial buildings; others invited to join effort.

| May 16, 2012

AIA issues guide to IGCC

Getting the IgCC adopted in all 50 states and in jurisdictions across the country is the primary mission of the ICC, which published the code in March.

| May 16, 2012

Architecture Billings Index reverts to negative territory

Decline is possibly a brief pause from unusually strong winter activity.

| May 16, 2012

AEG releases 3D video of L.A.'s Farmers Field

The Los Angeles Convention Center footage depicts the new convention center hall spaces, including a new lobby above Pico Boulevard, pre-function space, and what will be the largest multi-purpose ballroom in Los Angeles.

| May 16, 2012

Balfour Beatty Construction taps Kiger as VP of operations

Kiger will manage current relationships and pursue other strategic clients, including select healthcare clients and strategic project pursuits in the Central Tennessee region.

| May 15, 2012

One World Trade Center goes to new height of sustainability

One of the biggest challenges in developing this concrete mixture was meeting the Port Authority of New York/New Jersey’s strict requirement for the replacement of cement.

boombox1 - default
boombox2 -
native1 -

More In Category

Mass Timber

Charlotte's new multifamily mid-rise will feature exposed mass timber

Construction recently kicked off for Oxbow, a multifamily community in Charlotte’s The Mill District. The $97.8 million project, consisting of 389 rental units and 14,300 sf of commercial space, sits on 4.3 acres that formerly housed four commercial buildings. The street-level retail is designed for boutiques, coffee shops, and other neighborhood services.


Construction Costs

New download: BD+C's May 2024 Market Intelligence Report

Building Design+Construction's monthly Market Intelligence Report offers a snapshot of the health of the U.S. building construction industry, including the commercial, multifamily, institutional, and industrial building sectors. This report tracks the latest metrics related to construction spending, demand for design services, contractor backlogs, and material price trends.



halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021