flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

Tankless water heaters improve water heating efficiency in an Indiana condo community

Sponsored Content Plumbing

Tankless water heaters improve water heating efficiency in an Indiana condo community

Cascaded Navien NPE-240A tankless water heaters installed in three phases at condominium community in Culver, Ind.


By NAVIEN INC. | May 4, 2020
Jason Richards, A+ Plumbing Heating and Cooling, with Navien NPE-240A tankless water heaters

Jason Richards, owner of A+ Plumbing Heating and Cooling, installed Navien NPE-240A tankless water heaters at Culver Cove, a condo community in Indiana. Photo: Navien

     

Culver Cove is an 80‑unit condo complex located on Lake Maxinkuckee near Culver, Ind.

Originally hot water was supplied from three strategically located utility rooms, each with six 100‑gallon commercial tank‑type heaters. Circulating pumps and mixing valves were required to prevent scalding. Rich West, Executive Director of Culver Cove, was looking for a more efficient hot water system to reduce energy costs, especially during low demand periods. His research led him to the Navien Premium Efficiency (NPE) tankless water heaters that would eliminate the energy cost of constantly running the tanks to be ready for hot water demand.

West worked with Mike Lambert, then with Mid-City Supply Co., and Clark Boyles of P-M & Associates, the Navien distributor and rep in northern Indiana. They recommended a phase one installation of five cascaded Navien NPE-240A units for about one-third of the complex—about 26 units, from one to three bedrooms each. With the proven energy savings of the first phase, Culver Cove proceeded to change out the other two utility rooms that served the rest of the condos.

 

Culver Cove, an 80-unit condo community in Culver, Ind., installed Navien tankless water heaters to improve energy efficiencyCulver Cove, an 80-unit condo community in Culver, Ind., installed Navien tankless water heaters to  improve its overall energy efficiency.

 

Lambert and Boyles worked with Jason Richards, Owner of A+ Plumbing Heating and Cooling, to work out details for sizing, designing, and installing the system. The installation of each section took about a week and a half, including removing the old tanks. The five Navien units used two sets of four-inch PVC vent pipes that ran through the roof in an existing 12‑inch B vent.

 

BENEFITS OF NAVIEN NPE TANKLESS SYSTEM

Efficient hot water supply.  “The five Navien units are cascaded so when the master unit comes on, it triggers the next one in line to help as needed, and so on until all units are running if necessary,” said Richards. “Each time a Navien unit comes on, it’s a different master-slave situation, so all five units have equal run times.”

Technical factors. “Unlike the old tank system, we could eliminate the external circulating pump and mixing valve, since we can set the temperature at 120 degrees,” said Boyles. Another factor in selecting Navien NPE-A tankless water heaters was the internal recirculating pump and buffer tank, which assure an uninterrupted flow of hot water.

 

Old conventional water heaters at Culver Cove, Inc., condominiumsOld conventional water heaters at Culver Cove condominiums were replaced to improve energy efficiency.

 

Energy and water savings. “We have noticed a decrease in our energy cost from NIPSCO, our local gas supplier—a real dollar savings every month,” said West. “We have applied for an energy rebate. I also have seen a decrease in our domestic water use.”

Easier installation. “One of the main reasons we went with Navien is the ability to use PVC,” Richards said. “The common venting also makes it less expensive. In this retrofit situation, we could use existing penetrations to run our vents. That saved a lot of labor.”

For more information: NavienInc.com.

Tags

Related Stories

Sponsored | Plumbing | Aug 4, 2017

Shower threshold height – a better shower from the ground up!

Getting the right threshold height for your code-compliant shower installation is critical. In this blog post, we will consider how shower and shower-pan threshold heights work and why they are important for successfully meeting accessibility code requirements.

Sponsored | Plumbing | Aug 2, 2017

The new commercial restroom relies on durability and style

Architects and designers should look for well-designed products that can stand up to the daily demands of such frequented spaces.

Sponsored | HVAC | Apr 6, 2017

Viega ProPress shines in SolarCity construction

Buffalo will be the first city to produce the first-ever true solar roof – a roofing product with solar panels built in.

Architects | Apr 4, 2017

Architect Howard Elkus dies at 78

Cofounder of Elkus Manfredi Architects, his career spanned five decades, and included a spectrum of major design projects. 

Sponsored | Plumbing | Feb 22, 2017

Press pipe-joining provides valuable savings on potable water installation at Mercy Health – West Hospital

Nelson Stark selected Viega ProPress for the plumbing installation because the system is flameless and can be installed simultaneously with other utilities since there’s no need for welding or grooving equipment.

boombox1 - default
boombox2 -
native1 -

More In Category


Plumbing

EPA to revise criteria for WaterSense faucets and faucet accessories

The U.S. Environmental Protection Agency (EPA) plans to revise its criteria for faucets and faucet accessories to earn the WaterSense label. The specification launched in 2007; since then, most faucets now sold in the U.S. meet or exceed the current WaterSense maximum flow rate of 1.5 gallons per minute (gpm). 



halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021