flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

Press pipe-joining provides valuable savings on potable water installation at Mercy Health – West Hospital

Sponsored Content Plumbing

Press pipe-joining provides valuable savings on potable water installation at Mercy Health – West Hospital

Nelson Stark selected Viega ProPress for the plumbing installation because the system is flameless and can be installed simultaneously with other utilities since there’s no need for welding or grooving equipment.


By Viega | February 22, 2017

Nelson Stark saved time with modular construction.

Nelson Stark used Viega ProPress® to install the plumbing for the construction of Mercy Health – West Hospital in Cincinnati. Plumbers installed a combination of Viega ProPress for stainless pipe and fittings with Viega ProPress copper fittings as well as transition fittings for potable water at the medical facility.

Nelson Stark selected Viega ProPress for the plumbing installation because the system is flameless and can be installed simultaneously with other utilities since there’s no need for welding or grooving equipment.

“Using Viega ProPress allowed us to complete the joining-effort installation with this modularly prepared, innovative type of construction,” said Jeff Read, Vice President at Nelson Stark. “The installers put together each run of pipe for the 150-foot corridors with the fittings, but didn’t press them. Once it was sized and laid out correctly, they attached the fittings to the racks so that when the racks arrived at the hospital construction site all our installers had to do was make the connections.”

The Viega ProPress systems use press fittings to make water-tight and air-tight connections in copper tubing and stainless steel piping. The patented Smart Connect® feature, on all Viega ProPress systems, ensures leak-free connections.

“The project called for 3" and 4" mains from the mechanical room, down the halls and up the entire building tower. From the mains into each room we installed copper tubing and fittings in 2" and smaller,” said Todd Elliot, Project Executive at Nelson Stark. Overall, the plumbing install required more than 3,800' of large-diameter 316 stainless steel pipe and approximately 900 Viega ProPress stainless steel fittings as well as approximately 7,500 Viega ProPress copper fittings and valves.

For West Hospital, Nelson Stark had 60 plumbers installing Viega ProPress in the pre-fabricated method for the main corridors and on site in the individual rooms and public restrooms at the facility.

“Being able to use the same tool to press both stainless steel and copper fittings was a huge benefit,” added Elliot. By using the same tool for stainless, copper and transition fittings, Nelson Stark’s installers saved time and were able to simplify the plumbing installation.

“It was our first time installing Viega ProPress with stainless steel and the hospital was being built on a very tight schedule,” said Wells. “Viega ProPress is obviously quicker from a labor standpoint.”

“There are some unquantifiable advantages that affect the schedule,” explained Read. “We get called because of our reputation to complete projects on or ahead of the schedule.”

“Our customer saved on costs by having fewer hours of labor and using cost-effective stainless,” explained Wells. “The fitting can be installed under flow conditions so there’s no time-consuming process of bleeding a line before doing maintenance work.”

“We’ve installed thousands of Viega ProPress fittings and we’ve had a really good experience in not having leaks,” Elliot added. “We appreciate the huge safety advantage that Viega ProPress provides.”

Click here to read more, or visit www.viega.us

 

ProPress was selected because it is flameless.

Tags

Related Stories

| Aug 11, 2010

Autodesk 2010 Certification Now Available for Design Professionals

Autodesk, Inc., (Nasdaq: ADSK), today announced that design and engineering professionals can become Autodesk Certified in AutoCAD 2010, Autodesk Inventor 2010, Autodesk Revit Architecture 2010, and AutoCAD Civil 3D 2010 software. Becoming Autodesk Certified allows professionals, and companies boasting Autodesk Certified employees, to validate their industry skills and knowledge, demonstrate expertise and gain credibility.

| Aug 11, 2010

Jacobs, CH2M Hill, AECOM top BD+C's ranking of the 75 largest federal government design firms

A ranking of the Top 75 Federal Government Design Firms based on Building Design+Construction's 2009 Giants 300 survey. For more Giants 300 rankings, visit http://www.BDCnetwork.com/Giants

| Aug 11, 2010

AGC: Construction unemployment reaches 19.2%

Unemployment in the construction sector climbed to a “horrendous” 19.2 percent (not-seasonally adjusted) as an additional 59,000 construction workers lost their jobs in May according to new federal data, said construction economist Ken Simonson today.

| Aug 11, 2010

Gensler, HOK, HDR among the nation's leading reconstruction design firms, according to BD+C's Giants 300 report

A ranking of the Top 100 Reconstruction Design Firms based on Building Design+Construction's 2009 Giants 300 survey. For more Giants 300 rankings, visit http://www.BDCnetwork.com/Giants

| Aug 11, 2010

Gensler, Arup, HOK among the largest office sector design firms

A ranking of the Top 100 Office Design firms based on Building Design+Construction's 2009 Giants 300 survey. For more Giants 300 rankings, visit http://www.BDCnetwork.com/Giants

| Aug 11, 2010

Gensler among eight teams named finalists in 'classroom of the future' design competition

Eight teams were recognized today as finalists of the 2009 Open Architecture Challenge: Classroom. Finalists submitted designs ranging from an outdoor classroom for children in inner-city Chicago, learning spaces for the children of salt pan workers in India, safe spaces for youth in Bogota, Colombia and a bamboo classroom in the Himalayan mountains.

| Aug 11, 2010

AECOM, WATG top BD+C's ranking of the nation's 75 largest hotel design firms

A ranking of the Top 75 Hotel Design Firms based on Building Design+Construction's 2009 Giants 300 survey. For more Giants 300 rankings, visit http://www.BDCnetwork.com/Giants

| Aug 11, 2010

Parsons Brinckerhoff, Dewberry among nation's largest multifamily design firms, according to BD+C's Giants 300 report

A ranking of the Top 75 Multifamily Design Firms based on Building Design+Construction's 2009 Giants 300 survey. For more Giants 300 rankings, visit /giants

| Aug 11, 2010

USGBC’s Greenbuild 2009 brings global ideas to local main streets

Save the planet with indigenous knowledge. Make permanent water part of your life. Dive deep water for clues to environmental success.  Connect site selection to successful creative concepting. Explore the unknown with Discovery Channel’s best known guide. These are but a few of the big ideas participants can connect to at USGBC’s Greenbuild International Conference and Expo, taking place on November 11-13, 2009 in Phoenix, Ariz.

boombox1 - default
boombox2 -
native1 -

More In Category


Plumbing

EPA to revise criteria for WaterSense faucets and faucet accessories

The U.S. Environmental Protection Agency (EPA) plans to revise its criteria for faucets and faucet accessories to earn the WaterSense label. The specification launched in 2007; since then, most faucets now sold in the U.S. meet or exceed the current WaterSense maximum flow rate of 1.5 gallons per minute (gpm). 



halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021