flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

How owners should comply with OSHA roofing safety guidelines

Codes and Standards

How owners should comply with OSHA roofing safety guidelines

Buildings should have fall protection and restraint provisions for those who go on roofs.


By Peter Fabris, Contributing Editor | June 1, 2020

Courtesy Pixabay

Building owners have a responsibility to protect people who venture on their roofs, according to OSHA.

OSHA prescribed certain safety requirements that were introduced in January 2017. Among them are a raised warning line 15 feet from the roof edge, and a guardrail or cage around skylights.

OSHA has designated three work zones on low-slope roofs with unprotected edges that are four feet or more above a lower level. The extremely high danger zone (less than six feet from the roof’s edge) requires a protective feature such as a guardrail system, safety net system, personal fall protection systems (e.g., personal fall arrest, travel restraint, positioning system), or a 42-inch-high parapet.

Guardrails are typically installed six feet from the roof’s edge. If there is something near the edge like a condenser unit requiring periodic maintenance, then guardrails must be placed right up to the roof edge.

Related Stories

| Dec 1, 2011

Safety tracking tool helping prevent injuries at World Trade Center site

Since putting in place their Safety Management Systems Tracking Tool three years ago, risk managers for the World Trade Center project in New York say they've seen workplace injuries, reported hazards, and workers compensation claims decline.

| Dec 1, 2011

OSHA releases new construction safety videos

OSHA released new safety videos to offer both employers and workers brief, easy-to-understand education about construction safety.

| Dec 1, 2011

GSA Region 5 BIM standards could set national agenda in government contracting

Learning how the GSA wants to work with contractors using Building Information Models (BIM) will dramatically improve your odds of winning federal work.

| Nov 23, 2011

Fenestration council seeks committee members

The National Fenestration Rating Council (NFRC) is seeking members for a committee to pursue recognition of its ratings procedures from the American National Standard Institute (ANSI).

| Nov 23, 2011

Obama signs repeal of 3% withholding on government contracts

President Obama signed a bill that repeals a law requiring governments to withhold 3% of payments over $10,000 to contractors.

| Nov 23, 2011

USGBC launches app lab for LEED certification process

The U.S. Green Building Council has released the App Lab, a searchable catalog of third-party apps that are integrated with LEED data.

| Nov 23, 2011

Document gives advice on stormwater runoff management

The report, “Rooftops to Rivers II,” provides tips on how cities can use smart infrastructure and green building design to minimize pollution from stormwater runoff and other wastewaters.

| Nov 23, 2011

Zoning changes proposed to make New York City buildings greener

New York City will introduce new zoning proposals next month that would make it easier for building owners to add features that will make their properties more sustainable.

| Nov 18, 2011

AGC offers webinar on Davis-Bacon compliance

Webinar to be held in two sessions, Dec. 7 and 8 from 2:00-3:30 p.m. EST.

| Nov 18, 2011

New green construction code may help push LEED standards higher

The International Green Construction Code (IgCC) is expected to set a floor for building standards and may create the opportunity for LEED certifications to push toward higher ceilings.

boombox1 - default
boombox2 -
native1 -

More In Category




halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021

Â