flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

GIS benefits are widely accepted, but measurements of importance vary among AEC firms

AEC Tech

GIS benefits are widely accepted, but measurements of importance vary among AEC firms

Future usage might boil down to competitive pressure, according to a Dodge Data & Analytics survey.


By John Caulfield, Senior Editor | December 21, 2020
Use of Geographic Information Systems, by AEC business classification

Most AEC firms have had experience using Geographic Information Systems software at some stage of their projects. Charts: Dodge Data & Analytics

The new analysis reveals that the inherent value of Geographic Information Systems (GIS) is well understood by AEC firms, and those that use it report achieving important benefits. Even firms and individuals currently not using GIS have a favorable view of its potential, according to the report released by Dodge Data & Analytics.

Those benefits include improved productivity and client satisfaction, the ability to offer more services; reduced conflicts, field coordination problems, or changes during construction; and increased ability to manage project complexity.

The report states that designers and contractors also see value in their entire teams using GIS data, especially when that sharing engages owners. But when using GIS across project teams, interoperability is key to sustaining contractor and designer workflows. The report notes that the industry has been investing in training to find qualified staff to manage GIS.

Measurement of ROI from use of GIS

A strong majority of respondents are experiencing double-digit returns on investment from using ROI.

 

The data and analysis in this report—titled “The Business Value of GIS for Design and Construction”—are based on responses to an online survey conducted in August and September 2020. The survey’s 473 respondents include 228 architects, 43 civil or structural engineers, 33 engineering consultants, 113 GCs or CMs, and 56 specialty trade contractors.

Respondents were eligible to take the survey if they had experience in using relevant software, such as CAD drafting, 2- and 3-D modeling apps, data visualization and mapping, and/or collaboration tech or project management software.

The report includes interviews with Donna Huey, Senior Vice President and Director of Client Technologies at Atkins North America; Cory Dippold, PE, Vice President-Special Projects Applications, Mott MacDonald; and Sanjay Kumar, founder and CEO, Geospatial Media and Communications.

Access to the Dodge report requires registration. Autodesk and Esri provided funding and support for the report.

ROI CONNECTED TO FREQUENCY OF USE

What architects use GIS for

 

What engineers use GIS for

What GCs use GIS for

 

What specialty trades use GIS for

The charts above show the frequency of GIS usage by company type, and illustrate how each company's priorities differ in GIS's application.

 

The Dodge report touches specifically on the integration of GIS and BIM, the benefits of GIS on project processes and outcomes, and how GIS helps reduce risk and enhance a project’s sustainability and disaster resilience. Client satisfaction is at the top of respondents’ list of market-related benefits from using GIS. Digital tools like GIS are also helping AEC firms keep jobsites safe and productivity high during the coronavirus pandemic.

Over the past three years, more than half of the survey’s respondents said their companies had invested in software that supports the use of GIS, and 36% said they’d invested in training, too, during that period. Among the 50% of respondents who say they’ve experienced positive returns on their investments, nearly 70% estimates that the degree of positive returns exceeds 10%.

The report implies a connection between ROI and the frequency of GIS use by project team members. Nearly two-fifths (38%) of the architects who replied to the survey state that on at least half of their projects, other design firms or consultants on the design team use GIS.

INTEROPERABILITY STILL PROBLEMATIC

Challenges to using GIS

Using GIS with other digital tools, and finding people who are familiar with the software, pose limits to its wider application, especially when it comes to sharing data with teams.

 

Engineers state that owners now expect the design team to provide updates back to the GIS as part of the collaborative process during design. And nearly all contractors surveyed (at least 96%) report that a project’s GC is either using GIS or takes advantage of GIS in design documents. For contractors, the most valuable engagement is when the design team has used GIS in its design.

Interoperability with other digital tools, however, continues to be the biggest roadblock to greater use of GIS; at least half of the architects and engineers surveyed cited this as a challenge. Other impediments include finding qualified staff, the quality of the data, and access to the right tools for projects. Finding staff is the greatest challenge for contractors and specialty trades.

Better interoperability, in fact, would drive greater use of GIS, say 54% of the survey’s respondents. Another driver would be more accurate and reliable GIS information, say 36% of respondents.

Data quality is particularly critical when AEC firms deploy tools like GIS and BIM in their smart city projects. If a building is viewed as a system, and a city a system of systems, then “The marriage of BIM and GIS makes data exchange possible across those levels of scale,” the report states. “The potential is huge,” adds Scott Edmondson, a senior planner and economist with San Francisco Planning’s data analytics group.

This marriage is less about creating a digital twin of a city than it is about making incremental improvements to existing conditions within a city, observed Stephen Brockwell, senior product owner at Esri. With data integrations across BIM and GIS, “dynamic, thriving cities have never been more possible,” said Brockwell.

EVEN NONUSERS ARE COGNIZANT OF BENEFITS

If GIS is such a great tool, what’s keeping more AEC firms form using it? There was a small group of nonusers among the survey’s respondents, and 13% of them expressed no interest in using GIS in the future, citing the lack of real application for what they do, or not enough client demand.

Conversely, 87% of nonusers say they are aware of GIS’s benefits. Fifty-five percent of nonusers say they are open to exploring GIS’s potential value to their firms.

Expected importance of GIS varies

Designers are more sanguine about the future relevance of GIS for their business sector.

 

The extent that competitors are using GIS might eventually drive nonusers to give the tool a tryout. Other influencers for designers include improved field data collection during planning and design, and improved product understanding among stakeholders. For contractors, the biggest influence for adopting GIS is reducing the number and need for RFIs and change orders, followed by improved collaboration across and within teams.

The benefits most likely to influence adoption of GIS are led, for designers and contractors alike, by improved productivity.

While designers are generally far more enthusiastic about the importance of GIS in five years, it is clear, according to the Dodge report, that the majority of designers and contractors not using GIS currently expects it to be at least moderately important to the industry in the near future.

Tags

Related Stories

AEC Innovators | Aug 9, 2019

Improving architectural designs through iteration

Computational design lets ZGF Architects see patterns that renderings and even models can’t show.

AEC Tech | Jul 29, 2019

2019 Bluebeam Extreme Conference: Peer-to-Peer Learning at Scale

XCON 2019 to focus on collaborative partnerships and what works in digital construction

Multifamily Housing | Jul 23, 2019

Is prefab in your future?

The most important benefit of offsite construction, when done right, is reliability.

AEC Tech | Jul 15, 2019

Lack of standards hampers development of exoskeleton industry

Guidelines, common terminology, and testing methodology are needed, says expert. 

AEC Tech | Jul 15, 2019

Investors eye startups focused on automating construction

Investors could reap big payoffs in an industry that experts say is ready for automation.

AEC Tech | Jul 12, 2019

A new Dodge-Viewpoint report gauges how well contractors gather and use jobsite data

Information is power, but are contractors collecting what they need to make better decisions?

| Jul 11, 2019

Pepper Construction is using 3D models to help identify underground utilities on jobsites

Overlaying new installs and site surveys add precision to the construction process.

AEC Tech | Jul 10, 2019

Blue Collar Labs launches Builder’s Almanac, an online construction technology evaluation platform

The free online resource aims to eliminate subjective bias from the contech software evaluation process. 

AEC Tech | Jul 2, 2019

Living in a cloud: What nanotech means for architecture and the built environment

Could there come a time when buildings will become less about bricks and mortar and feel more like mists or fogs?

AEC Tech | Jun 28, 2019

In London, Autodesk homes in on construction management

The software goliath sounds the alarm about the urgent need for productivity improvements to address unbridled urbanization.

boombox1 - default
boombox2 -
native1 -

More In Category




halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021