flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

Construction employers add 36,000 jobs in January and 226,000 over the year

Contractors

Construction employers add 36,000 jobs in January and 226,000 over the year

Industry employment is most since August 2008 As unemployment rate falls sharply.


By Associated General Contractors of America | February 2, 2018

Construction employment increased by 36,000 jobs in January to the highest level since August 2008, according to an analysis of new government data by the Associated General Contractors of America. Association officials said a possible new measure being discussed in Washington that would invest an additional $1.5 trillion in repairing and improving infrastructure would both help the sector continue to add jobs and attract new workers.

"The construction industry has consistently added workers at nearly double the rate of the overall economy," said Ken Simonson, the association's Chief Economist. "The outlook remains positive for further growth in the industry. But finding workers to complete all projects will be a challenge with unemployment so low overall and in construction."

Construction employment totaled 7,099,000 in January, a gain of 36,000 for the month and 226,000, or 3.3%, over 12 months. The economist pointed out that the­­ year-over-year growth rate in industry jobs was more than double the 1.5% rise in total nonfarm payroll employment.

Residential construction—comprising residential building and specialty trade contractors—added 19,000 jobs in January and 88,400 jobs, or 3.3%, over the past 12 months. Nonresidential construction (building, specialty trades, and heavy and civil engineering construction) employment increased by 16,400 jobs in January and 137,200 positions, or 3.3%, over 12 months.

The number of unemployed jobseekers with recent construction experience fell to 707,000 in January, down from 859,000 in January 2017, while the unemployment rate in construction dropped to 7.3% last month from 9.4% a year earlier. The number and rate were the lowest for January since the series began in 2000. Unemployment data by industry are not seasonally adjusted, and winter figures for construction are normally higher than they are for total nonfarm employment, but these declines show how difficult it has become for the industry to find experienced workers, Simonson said.

Average hourly earnings in the industry climbed to $29.33, a rise of 2.9% from a year earlier. The economist noted that construction pays nearly 10% more per hour than the average nonfarm private-sector job in the United States.

Construction officials said that a new presidential push to boost infrastructure investments by $1.5 trillion over the next ten years would give a needed boost to infrastructure contractors who, according to construction spending figures released yesterday, have seen lagging demand compared to other market segments. Moreover, significant new and long-term investment in infrastructure would help encourage more people to consider high-paying careers in construction.

"Bringing our aging infrastructure back to a state of good repair will support short-term economic growth while making our economy more efficient and competitive over the long-term," said Stephen E. Sandherr, the association's Chief Executive Officer. "These new investments will also send a clear signal to new workers to consider careers in construction and the middle-class life those jobs support."

Related Stories

75 Top Building Products | Apr 22, 2024

Enter today! BD+C's 75 Top Building Products for 2024

BD+C editors are now accepting submissions for the annual 75 Top Building Products awards. The winners will be featured in the November/December 2024 issue of Building Design+Construction. 

Resiliency | Apr 22, 2024

Controversy erupts in Florida over how homes are being rebuilt after Hurricane Ian

The Federal Emergency Management Agency recently sent a letter to officials in Lee County, Florida alleging that hundreds of homes were rebuilt in violation of the agency’s rules following Hurricane Ian. The letter provoked a sharp backlash as homeowners struggle to rebuild following the devastating 2022 storm that destroyed a large swath of the county.

Mass Timber | Apr 22, 2024

British Columbia changing building code to allow mass timber structures of up to 18 stories

The Canadian Province of British Columbia is updating its building code to expand the use of mass timber in building construction. The code will allow for encapsulated mass-timber construction (EMTC) buildings as tall as 18 stories for residential and office buildings, an increase from the previous 12-story limit. 

Standards | Apr 22, 2024

Design guide offers details on rain loads and ponding on roofs

The American Institute of Steel Construction and the Steel Joist Institute recently released a comprehensive roof design guide addressing rain loads and ponding. Design Guide 40, Rain Loads and Ponding provides guidance for designing roof systems to avoid or resist water accumulation and any resulting instability.

Building Materials | Apr 22, 2024

Tacoma, Wash., investigating policy to reuse and recycle building materials

Tacoma, Wash., recently initiated a study to find ways to increase building material reuse through deconstruction and salvage. The city council unanimously voted to direct the city manager to investigate deconstruction options and estimate costs. 

Student Housing | Apr 19, 2024

$115 million Cal State Long Beach student housing project will add 424 beds

A new $115 million project recently broke ground at California State University, Long Beach (CSULB) that will add housing for 424 students at below-market rates. The 108,000 sf La Playa Residence Hall, funded by the State of California’s Higher Education Student Housing Grant Program, will consist of three five-story structures connected by bridges.

Construction Costs | Apr 18, 2024

New download: BD+C's April 2024 Market Intelligence Report

Building Design+Construction's monthly Market Intelligence Report offers a snapshot of the health of the U.S. building construction industry, including the commercial, multifamily, institutional, and industrial building sectors. This report tracks the latest metrics related to construction spending, demand for design services, contractor backlogs, and material price trends.

Construction Costs | Apr 16, 2024

How the new prevailing wage calculation will impact construction labor costs

Looking ahead to 2024 and beyond, two pivotal changes in federal construction labor dynamics are likely to exacerbate increasing construction labor costs, according to Gordian's Samuel Giffin.

Healthcare Facilities | Apr 16, 2024

Mexico’s ‘premier private academic health center’ under design

The design and construction contract for what is envisioned to be “the premier private academic health center in Mexico and Latin America” was recently awarded to The Beck Group. The TecSalud Health Sciences Campus will be located at Tec De Monterrey’s flagship healthcare facility, Zambrano Hellion Hospital, in Monterrey, Mexico.

Market Data | Apr 16, 2024

The average U.S. contractor has 8.2 months worth of construction work in the pipeline, as of March 2024

Associated Builders and Contractors reported today that its Construction Backlog Indicator increased to 8.2 months in March from 8.1 months in February, according to an ABC member survey conducted March 20 to April 3. The reading is down 0.5 months from March 2023.

boombox1 - default
boombox2 -
native1 -

More In Category


AEC Tech

Lack of organizational readiness is biggest hurdle to artificial intelligence adoption

Managers of companies in the industrial sector, including construction, have bought the hype of artificial intelligence (AI) as a transformative technology, but their organizations are not ready to realize its promise, according to research from IFS, a global cloud enterprise software company. An IFS survey of 1,700 senior decision-makers found that 84% of executives anticipate massive organizational benefits from AI. 


Codes and Standards

Updated document details methods of testing fenestration for exterior walls

The Fenestration and Glazing Industry Alliance (FGIA) updated a document serving a recommended practice for determining test methodology for laboratory and field testing of exterior wall systems. The document pertains to products covered by an AAMA standard such as curtain walls, storefronts, window walls, and sloped glazing. AAMA 501-24, Methods of Test for Exterior Walls was last updated in 2015. 


MFPRO+ News

World’s largest 3D printer could create entire neighborhoods

The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.

halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021