flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

California’s wildfire building code significantly reduces structural loss

Codes and Standards

California’s wildfire building code significantly reduces structural loss

As other states consider upgrading their codes, Golden State provides useful model.


By Peter Fabris, Contributing Editor | January 12, 2022
Wildfire in a field

Courtesy Pixabay

A recently released study by the National Bureau of Economic Research found that California’s building code for higher risk wildfire areas has significantly reduced structural loss.

A home built in 2008 or later under the Golden State’s expanded wildfire building code is about 40% less likely to be destroyed than a 1990 home experiencing an identical wildfire, according to the research. “There is strong evidence that these effects are due to state and local building code changes,” the bureau’s report says.

California now requires all roof material in wildfire hazard areas to be rated Class A for fire resistance. In addition, exterior siding must be fire resistant, vents must covered by a fine wire mesh to resist ember intrusion, windows and doors must resist fire for at least

20 minutes, and decks and other building appendages must be built of non-combustible materials. The most recently update code also includes requirements for defensible space.

Other states that have experienced damaging large-scale wildfires including Arizona, Colorado, Oregon, and Washington have not as yet followed California’s lead to beef up building codes. California’s code, research suggests, presents a useful model for others to follow.

Related Stories

| Dec 27, 2012

New York City law tracking building energy use yields surprises

A legally mandated report that tracks the energy use of New York City's largest buildings provides details about which buildings are achieving higher-than-expected energy efficiency, such as the Chrysler and Empire State buildings, as well as those that are performing poorly.

| Dec 27, 2012

New Jersey considers green roof mandate for state buildings

The New Jersey legislature is considering a bill that would require installation of green or blue roofs on state buildings that are at least 15,000 sf.

| Dec 20, 2012

AIA’s Healthier Communities Through Design showcases local policy initiatives

The American Institute of Architects released Local Leaders: Healthier Communities Through Design, a report that demonstrates the power of architecture to improve public health with policies that promote active living, accessibility, transit options, and better indoor air quality.

| Dec 20, 2012

China to build sustainable city for 180,000 from scratch

A 120-million sf urban development in China will be designed according to high green standards for about 180,000 residents.

| Dec 20, 2012

Air duct trade group urges maintenance, restoration professionals to avoid chemical cleaners

The National Air Duct Cleaners Association (NADCA) urges professionals to avoid using chemicals as a method for cleaning and maintaining air duct systems.

| Dec 20, 2012

Valencia College shifts from LEED to Green Globes on new project for more flexibility

The Lake Nona campus of Valencia College in Florida shifted its sustainability standard to Green Globes largely to be able to use a bipolar-ionization system to treat its indoor air -- something LEED didn't allow.

| Dec 20, 2012

LEED-certified schools don’t have to cost more to build, save average of 33% on energy

On average, green schools use 33% less energy and 32% less water than their conventional counterparts, and save $100,000 per year on direct operating costs, according to the U.S. Green Building Council.

| Dec 13, 2012

New OSHA initiatives on tap at AGC safety and health conference

More than 150 industry professionals will discuss the development of regulatory and legislative activity on national and local levels at the Associated General Contractors of America’s health and safety conference.

boombox1 - default
boombox2 -
native1 -

More In Category



Standards

Design guide offers details on rain loads and ponding on roofs

The American Institute of Steel Construction and the Steel Joist Institute recently released a comprehensive roof design guide addressing rain loads and ponding. Design Guide 40, Rain Loads and Ponding provides guidance for designing roof systems to avoid or resist water accumulation and any resulting instability.


halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021