HPD Collaborative (HPDC) and Construction Information Network (CIN) have formed a product alliance to dispense more accurate and reliable classification of products with data from HPD reports.
HPDC and CSI are integrating the Crosswalk API into the HPD Builder v2.2, which includes baseline data that feeds into all certification and rating systems. This new alliance aims to provide architects, engineers, designers, contractors, and building owners with consistent, accurate data that feeds into the rating, grading, and certification systems of materials used in the built environment.
The Crosswalk platform is an API that connects construction industry standards and classifications, including CSI’s MasterFormat, Uniformat, and OmniClass, and ASTM’s E1557-09(2020)e1 with construction technology platforms and data flows. Prior to this alliance, manufacturers created a Health Product Declaration (HPD) by providing their products’ classification codes into the HPD Builder, a software tool for entering data, performing hazard screening, and formatting reports to be consistent with the HPD Open Standard.
With this new alliance, manufacturers now access the Crosswalk platform directly from HPD Builder. This ensures their product classification data is entered in a structured format, providing consistency, and avoiding inaccuracies, while dramatically reducing time spent on researching the material ingredients of building products, according to a news release.
Related Stories
| Dec 22, 2011
Federal home weatherization program has impacted 6.8 million homes
More than 6.8 million homes have been weatherized using federal, state, utility, and other funds under the American Recovery and Reinvestment Act.
| Dec 22, 2011
Group developing BIM data standards
A collaboration among Georgia Tech’s Digital Building Lab, the Precast Concrete Institute, the American Concrete Institute, and the American Institute of Steel Construction aims to develop global standards for transportation of three-dimensional digital models among fabricator, architecture, engineering, and construction groups.
| Dec 22, 2011
New green code spells out thermal requirement for roof retrofits
The 2012 International Green Construction Code (IgCC) includes a straightforward approach to minimum thermal requirements for roof and wall systems.
| Dec 22, 2011
AGC’s safety conference Jan. 11-13 in San Antonio
The Associated General Contractors of America’s national meeting for safety and health professionals will take place Jan. 11-13, 2012 in San Antonio, TX.
| Dec 22, 2011
Proposed New York City zoning revamp encourages rooftop solar and wind energy
New zoning regulation proposals to make it easier for building owners in New York City to make their structures more sustainable have entered the public approval process.
| Dec 15, 2011
Dayton, Ohio schools saving $2.6 million annually by building to LEED
On average, green schools save about $100,000 a year on operating costs, including energy and water savings.
| Dec 15, 2011
Building to LEED standards can pose new risks for construction workers
Workers on these projects suffer a 24% increase in falls to lower levels during roof work, which researchers attributed to the installation of solar panels, and a few other risks.
| Dec 15, 2011
NRDC charges Maine governor with weakening green wood requirement
The FSC program is administered through the Leadership in Energy and Environmental Design (LEED) and requires wood to be harvested in a sustainable way.
| Dec 15, 2011
Post-tornado, Tuscaloosa seeks to create walkable urban, retail areas
Block sizes initially were limited to a maximum perimeter of 1,750 feet, with no side of the block being longer than 500 feet.
| Dec 15, 2011
Allentown, Pa. city council asked to repeal union-friendly law
The mayor of Allentown, Pa. asked the City Council to repeal a year-old ordinance that forces contractors to hire union workers for large city projects funded with state and federal dollars.