The American Architectural Manufacturers Association (AAMA) released a new document laying out comparisons among three different rating systems for condensation on interior surfaces of fenestration products.
The formation of condensation on these surfaces in winter months is problematic in almost all modern buildings. This document addresses some of the common causes and the technical issues related to condensation. It also offers a comparison of the tools available for rating fenestration systems for condensation resistance.
“This new AAMA document was developed to provide a single reference source on the three common condensation rating systems for the U.S. and Canada,” says Doug Holmberg (Apogee Enterprises), co-chair of the Condensation Ratings Comparison Task Group. “It also provides information on how each rating is calculated for comparing the condensation resistance of products and the differences in the rating systems.”
Steve Strawn (JELD-WEN), co-chair of the Condensation Ratings Comparison Task Group, adds that window condensation ratings can be difficult to understand, and that the question has been further complicated by the use of different methods to rate condensation resistance.
Related Stories
| Oct 12, 2010
Cell and Genome Sciences Building, Farmington, Conn.
27th Annual Reconstruction Awards—Silver Award. Administrators at the University of Connecticut Health Center in Farmington didn’t think much of the 1970s building they planned to turn into the school’s Cell and Genome Sciences Building. It’s not that the former toxicology research facility was in such terrible shape, but the 117,800-sf structure had almost no windows and its interior was dark and chopped up.
| Oct 6, 2010
Windows Keep Green Goals in View
The DOE's National Renewable Energy Laboratory has almost 600 window openings, and yet it's targeting LEED Platinum, net-zero energy use, and 50% improvement over ASHRAE 90.1. How the window ‘problem’ is part of the solution.
| Sep 13, 2010
Triple-LEED for Engineering Firm's HQ
With more than 250 LEED projects in the works, Enermodal Engineering is Canada's most prolific green building consulting firm. In 2007, with the firm outgrowing its home office in Kitchener, Ont., the decision was made go all out with a new green building. The goal: triple Platinum for New Construction, Commercial Interiors, and Existing Buildings: O&M.
| Aug 11, 2010
Using physical mockups to identify curtain wall design flaws
Part two of a five-part series on diagnosing and avoiding cladding, glazing, and roofing failures from building forensics expert IBA Consultants.
