flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

A 267-unit multifamily community is under construction in Summerville, S.C.

Multifamily Housing

A 267-unit multifamily community is under construction in Summerville, S.C.

Summer Wind will be about half an hour outside of Charleston, S.C., in the rapidly expanding Summerville submarket.


By David Malone, Associate Editor | October 11, 2017
The Summer Wind multifamily community

Rendering courtesy of The Beach Company

Summer Wind, a 267-unit Class A multifamily community, is currently under construction in South Carolina by an affiliate of The Beach Company in Summerville’s Dorchester County. The development is being built in an area with an increasing demand for modern, reasonably priced apartment homes.

The development is located at the intersection of Highway 17A and Dorchester Road with easy access to Summerville’s shopping and entertainment, some of the area’s top schools, and employers such as Volvo, Boeing, Bosch, Mercedes, and Joint Base Charleston.

 

Summer Wind multifamily community and its one-acre parkRendering courtesy of The Beach Company.

 

Studio, one-, two-, and three-bedroom units will be offered in the three-story buildings that surround a pool and a one-acre park. Summer Wind will be pet friendly and offer a resident clubroom and adjoining lounge, a 24/7 fitness center, a large pool and leisure deck, a dog park, an outdoor kitchen, a fire pit, a car wash, and detached garages.

Units will include granite countertops, wood inspired plank flooring, oversized closets, and washers and dryers. Summer Wind also labels itself as a “Ten Gig” community, offering 10 gigabytes of symmetrical internet/data service through an agreement with Home Telecom.

 

The pool at Summer Wind multifamily communityRendering courtesy of The Beach Company.

 

The Property Management Division of The Beach Company will provide onsite management for Summer Winds. The consultant team includes JHP Architecture, Seamon Whiteside and Associates, Builders Design Interiors, and Terracon Consultants. The contractors for the project are Balfour Beatty Construction, Gulfstream Construction, and James White Construction.

Related Stories

Giants 400 | Jan 8, 2024

Top 60 Senior Living Facility Construction Firms for 2023

Whiting-Turner, Ryan Companies US, Weis Builders, Suffolk Construction, and W.E. O'Neil Construction top BD+C's ranking of the nation's largest senior living facility general contractors and construction management (CM) firms for 2023, as reported in the 2023 Giants 400 Report.

Giants 400 | Jan 8, 2024

Top 40 Senior Living Facility Engineering Firms for 2023

Kimley-Horn, Olsson, Tetra Tech, EXP, and IMEG head BD+C's ranking of the nation's largest senior living facility engineering and engineering/architecture (EA) firms for 2023, as reported in the 2023 Giants 400 Report.

Giants 400 | Jan 8, 2024

Top 80 Senior Living Facility Architecture Firms for 2023

Perkins Eastman, Hord Coplan Macht, Lantz-Boggio Architects, Ryan Companies US, and Moseley Architects top BD+C's ranking of the nation's largest senior living facility architecture and architecture engineering (AE) firms for 2023, as reported in the 2023 Giants 400 Report.

MFPRO+ News | Jan 8, 2024

Canada turns to 1940s strategy to speed up housing construction

To address a severe housing shortage, Prime Minister Justin Trudeau’s administration has begun a housing construction strategy pioneered in the years after World War 2. The government aims to use a catalog of pre-approved home designs to reduce the cost and time to construct homes.

MFPRO+ News | Jan 4, 2024

Bjarke Ingels's curved residential high-rise will anchor a massive urban regeneration project in Greece

In Athens, Greece, Lamda Development has launched Little Athens, the newest residential neighborhood at the Ellinikon, a multiuse development billed as a smart city. Bjarke Ingels Group's 50-meter Park Rise building will serve as Little Athens’ centerpiece.

MFPRO+ News | Jan 2, 2024

New York City will slash regulations on housing projects

New York City Mayor Eric Adams is expected to cut red tape to make it easier and less costly to build housing projects in the city. Adams would exempt projects with fewer than 175 units in low-density residential areas and those with fewer than 250 units in commercial, manufacturing, and medium- and high-density residential areas from environmental review. 

MFPRO+ News | Dec 22, 2023

Document offers guidance on heat pump deployment for multifamily housing

ICAST (International Center for Appropriate and Sustainable Technology) has released a resource guide to help multifamily owners and managers, policymakers, utilities, energy efficiency program implementers, and others advance the deployment of VHE heat pump HVAC and water heaters in multifamily housing.

Giants 400 | Dec 20, 2023

Top 100 Apartment and Condominium Construction Firms for 2023

Clark Group, Suffolk Construction, Summit Contracting Group, and McShane Companies top BD+C's ranking of the nation's largest apartment building and condominium general contractors and construction management (CM) firms for 2023, as reported in Building Design+Construction's 2023 Giants 400 Report.

Giants 400 | Dec 20, 2023

Top 70 Apartment and Condominium Engineering Firms for 2023

Kimley-Horn, WSP, Tetra Tech, and Thornton Tomasetti head BD+C's ranking of the nation's largest apartment building and condominium engineering and engineering/architecture (EA) firms for 2023, as reported in Building Design+Construction's 2023 Giants 400 Report.

Giants 400 | Dec 20, 2023

Top 160 Apartment and Condominium Architecture Firms for 2023

Gensler, Humphreys and Partners, Solomon Cordwell Buenz, and AO top BD+C's ranking of the nation's largest apartment building and condominium architecture and architecture/engineering (AE) firms for 2023, as reported in Building Design+Construction's 2023 Giants 400 Report.  

boombox1 - default
boombox2 -
native1 -

More In Category


MFPRO+ News

World’s largest 3D printer could create entire neighborhoods

The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.



halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021