One of the oldest buildings on the University of New Hampshire (UNH) campus, Huddleston Hall is a multipurpose facility, which includes dormitories, classrooms and an event center.
When Huddleston Hall needed some renovation work done, UNH brought on the Armand E. Lemire Company in Hooksett, N.H. Armand E. Lemire Company would be working on multiple different installations in Huddleston Hall, including domestic water, drainage, HVAC and ventilation system and exhaust for bathrooms. For the domestic water lines, the contractor chose to install Viega ProPress systems for both copper and 316 stainless in sizes ½" to 1½".
“We’ve been using Viega products for years,” said Jim Dooley, Project Manager for Armand E. Lemire Company. “We use copper Viega ProPress a lot, so we have all the tools from ½" to 4" but the stainless steel was relatively new to us.”
Viega is the only manufacturer to offer press fitting solutions in multiple materials like copper, stainless steel, carbon steel and high-performance polymer. Viega offers press fittings in two grades of stainless steel, 304 and 316.
Viega ProPress for 316 stainless. Photo: Viega
“Viega ProPress was in the spec,” Dooley said, “and we had to use stainless. So we put it in the exposed piping and everything else in the domestic water system was copper.”
The old chrome-plated brass piping in Huddleston Hall had begun to deteriorate and peel. The Armand E. Lemire Company removed them and replaced the lines with Viega ProPress for 316 stainless, which retains the look of the original piping and also carries an NSF approval for potable water systems.
Founded in 1990 by three siblings, The Armand E. Lemire Company, Inc. specializes in multiple types of plumbing and heating, working in commercial and industrial projects, as well as private schools and other facilities.
Huddleston Hall isn’t the only facility on the UNH campus that has Viega ProPress systems installed in it.
“We’ve used some Viega ProPress for copper on a 4" vacuum system there,” Dooley said. “We just finished a testing facility and we’re in the process of doing a chemistry lab too. And that will be compressed air and gas lines.”
Dooley was impressed, too, with the local Viega sales representative who was involved with the project.
“He’s a master plumber by trade,” Dooley said of his Viega rep, “so it’s very easy to talk to him. He’s very knowledgeable about his product and his tools, and he’s easy to contact.”
Installing Viega ProPress systems at Huddleston Hall allowed The Armand E. Lemire Company to complete the project on time and provide the University of New Hampshire with an installation that was both safe and efficient.
“The most effective part of using Viega ProPress is the time that it saves,” Dooley said. “Installing it just saves so much time.”
Dooley, who’s been in the trades for 42 years, was more than satisfied with the results of the Viega ProPress for stainless installation.
“It came out nice and neat and the school was very pleased with it,” he said. “Exposed piping is something you’re going to see forever and the stainless looks good.”
For more information, visit www.viega.us.
Related Stories
| May 15, 2012
National Tradesmen Day set for Sept. 21
IRWIN Tools invites the nation to honor "The Real Working Hands that Build America and Keep it Running Strong".
| May 14, 2012
Codes harvest rainwater
IAPMO’s Green Plumbing and Mechanical Code Supplement could make rainwater harvesting systems commonplace by clearly outlining safe installation and maintenance practices.
| May 14, 2012
Plumbing research coalition to study drainline transport issue
The effort is aimed at determining if decreasing levels of water flow––caused by increasingly efficient plumbing fixtures––are sufficient to clear debris from plumbing pipes.
| May 1, 2012
White paper discusses benefits of diaphragm and piston flushometer valves
The white paper highlights considerations that impact which type of technology is most appropriate for various restroom environments.
| May 1, 2012
Bruce E. Brooks Associates announces new commissioning subsidiary
Brooks + Wright Commissioning to be led by Will Wright.
| Apr 26, 2012
Blackney Hayes Architects launches new engineering division
The new division, BHH Engineers, will be led by Mark Hershman, PE.
| Jan 26, 2012
American Standard names Gould as president and CEO
Gould succeeds Don Devine, who led the successful turnaround of American Standard Brands.
| Dec 2, 2011
What are you waiting for? BD+C's 2012 40 Under 40 nominations are due Friday, Jan. 20
Nominate a colleague, peer, or even yourself. Applications available here.
| Oct 6, 2011
GREENBUILD 2011: Growing green building market supports 661,000 green jobs in the U.S.
Green jobs are already an important part of the construction labor workforce, and signs are that they will become industry standard.
| Oct 5, 2011
GREENBUILD 2011: Kohler builds sustainable booth at Greenbuild 2011
In a setting composed of reclaimed materials, biodegradable signage, energy-efficient lighting and more, exhibitor highlights its new products with ecological awareness.
