flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

Standard for conducting, reporting energy audits open for review

Standards

Standard for conducting, reporting energy audits open for review

A joint ASHRAE/ACCA proposal seeks comments from industry professionals.


By Peter Fabris, Contributing Editor | August 16, 2016

Pixabay Public Domain

A proposed joint standard from ASHRAE and Air Conditioning Contractors of America (ACCA) that establishes consistent practices for conducting and reporting energy audits is open for a 45-day American National Standards Institute (ANSI) public review.

Standard 211P defines the procedures required to perform ASHRAE Level 1, 2, and 3 Energy Audits, and provide a common scope of work for these audit levels for use by building owners and others as well as establishes standardized industry practices and minimum reporting requirements for the results.

An initial Advisory Public Review (non-ANSI) of the standard that closed in December 2015 resulted in more than 600 comments from some 100 people. ASHRAE/ACCA Standard 211P, Standard for Commercial Building Energy Audits, is open for comments from Aug. 5 until Sept. 19, 2016. To comment, visit www.ashrae.org/publicreviews.

Related Stories

Codes and Standards | Jun 30, 2020

7 must reads for the AEC industry today: June 30, 2020

Affordable housing comes to the Bay Area and this is not the end of cities.

Codes and Standards | Jun 29, 2020

Mandated building retrofits are necessary to meet climate crisis

Performance standards could greatly reduce GHG emissions.

Codes and Standards | Jun 29, 2020

New buildings can fall short of designed performance

Similar structures can produce different energy usage results.

Codes and Standards | Jun 25, 2020

Arc offers tools, analytics for safe workplace re-entry

Platform helps sustainability teams to collect data, benchmark progress, measure impact, and improve performance.

Codes and Standards | Jun 24, 2020

New API enables design and construction technology platforms to connect

Construction Specifications Institute offers “digital classification engine.”

Codes and Standards | Jun 23, 2020

State lawmakers encouraging transition to heat pumps for building heating

Policies aim to replace gas heaters with electric units.

Codes and Standards | Jun 22, 2020

Natl. Renewable Energy Labs, Cold Climate Research Ctr. team up on extreme weather research

Focus on renewable power, sustainable transportation, energy efficiency, and energy systems integration.

Codes and Standards | Jun 19, 2020

Demand for family rentals expected to jump over next few years

Developers’ focus on single, urban millennials leaves family market underserved.

Codes and Standards | Jun 17, 2020

AIA offers retail and office 3D models for reducing risk of COVID-19 transmission

For modifying stores and offices with 17-point architectural, engineering, and administrative framework.

Codes and Standards | Jun 17, 2020

Santa Fe is second city in the world to achieve LEED v4.1 Gold

New Mexico community gained credits for resilience planning, including public health crises.

boombox1 - default
boombox2 -
native1 -

More In Category




halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021