flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

Resolving practical problems in roofing retrofits and renovations [AIA course]

Resolving practical problems in roofing retrofits and renovations [AIA course]

This course, worth 1.0 AIA HSW learning unit, provides expert advice on how to make a roof last as long as possible, and how to properly retrofit or reroof when the roof has run its course.


By BY C.C. Sullivan and Barbara Horwitz-Bennett | November 17, 2014
One of the largest PV installations in the country, thin-film solar laminate pan
One of the largest PV installations in the country, thin-film solar laminate panels on the roof of South Carolinas 1.2-million-
This article first appeared in the January 2013 issue of BD+C.
Initial cost of a commercial, industrial, or institutional building's roofing system is about 10% of total construction cost, but the roof can end up accounting for as much as 60% of a building's total maintenance cost throughout the building's life cycle. This course provides expert advice on how to make a roof last as long as possible, and how to properly retrofit or reroof when the roof has run its course.
 
After reading this article, you should be able to:
  • Describe the primary benefits of reroofing and roof renovation projects for building performance, with emphasis on the positive impacts on indoor environmental quality, comfort, and health for building occupants.
  • Discuss the rationales for existing roofing systems of choosing overlayment or tear-off as strategies for a roofing retrofit, along with their environmental and health considerations.
  • List at least four strategies for roofing applications as part of a sustainable design project (including LEED projects) for indoor environmental quality, moisture protection, mold prevention, and building envelope optimization.
  • Describe the primary requirements for vegetated (green) roofing system design and installation and their benefits in terms of reducing urban heat-island effect, energy consumption, and greenhouse gas emissions.

 

TAKE THIS FREE AIA COURSE AT BDCUNIVERSITY.COM

Related Stories

Sponsored | BD+C University Course | Feb 17, 2022

Metal roofing trends

New ideas in design and constructability are radically changing how metal systems are used as roofing for commercial and institutional buildings. Behind the investment in these new kinds of expressions and construction approaches is a growing interest in improved performance and reduced environmental impact. Metal roofing systems can cut cooling and heating loads significantly, according to the EPA.

Sponsored | BD+C University Course | Jan 30, 2022

Optimized steel deck design

This course provides an overview of structural steel deck design and the ways to improve building performance and to reduce total-project costs.

Roofing | May 18, 2021

Duro-Last®, Inc. Oregon Facility Receives Prestigious VPP Star Site Renewal and Safety Committee Recognition

Duro-Last, Inc. is pleased to announce that its Grants Pass, Oregon manufacturing facility recently received a renewal on their Star Site status from the Occupational Safety & Health Organization’s (OSHA) Voluntary Protection Program (VPP), earning an exemplary “A+” rating. Originally awarded Star Site status in 2016, this renewal reinforces Duro-Last’s continued commitment to the highest standards of workplace safety.

Coronavirus | Apr 8, 2020

COVID-19 alert: Most U.S. roofing contractors hit by coronavirus, says NRCA

NRCA survey shows 52% of roofing contractor said COVID-19 pandemic was having a significant or very significant impact on their businesses.

Building Technology | Jan 7, 2020

Tariff whiplash for bifacial solar modules

Bifacial solar systems offer many advantages over traditional systems.

75 Top Building Products | Dec 16, 2019

101 Top Products for 2019

Building Design+Construction readers and editors select their top building products for the past 12 months in the fourth-annual 101 Top Products report.

boombox1 - default
boombox2 -
native1 -

More In Category


Standards

Design guide offers details on rain loads and ponding on roofs

The American Institute of Steel Construction and the Steel Joist Institute recently released a comprehensive roof design guide addressing rain loads and ponding. Design Guide 40, Rain Loads and Ponding provides guidance for designing roof systems to avoid or resist water accumulation and any resulting instability.



halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021