flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

More designers focusing on acoustic properties of buildings

Codes and Standards

More designers focusing on acoustic properties of buildings

Recognition that structures should be acoustically satisfying.


By Peter Fabris, Contributing Editor | August 8, 2019
More designers focusing on acoustic properties of buildings, wellness design

Courtesy Pixabay 

A growing number of designers are paying close attention to the acoustic properties of buildings, according to a BBC Future report.

With studies indicating that noisy work and home settings are linked to depression, anxiety, and reduced performance, architects are recognizing that buildings not only need to be functional and aesthetically pleasing, but also acoustically satisfying.

Up to now, mainstream architecture typically focused on a building’s acoustic properties only in the construction of concert halls and performance spaces.

New virtual reality systems using acoustic modeling software enable architects to listen to how the spaces they design might sound like through aural simulations of structures. One researcher is studying spaces with exemplary acoustic qualities to create an algorithm or a computational routine that architects can use when designing buildings.

It may be possible for structures to cancel out noise by exploiting the physics of sound interference. A sound wave at the right frequency and wavelength can counteract the sound waves of unwanted noises.

Related Stories

| Feb 6, 2013

Green-roofing bills approved by New Jersey's state Assembly

Two bills that would require installation of green and blue roofs on new government buildings received overwhelming approval from the state Assembly in New Jersey.

| Feb 6, 2013

BOMA favors voluntary energy benchmarking and disclosure, opposes mandates

The Building Owners and Managers Association (BOMA) International announced support for voluntary energy benchmarking, but said it opposes mandates for benchmarking, disclosure, and labeling that many states and municipalities are implementing.

| Feb 6, 2013

Lumber Standard Committee approves new Southern Pine design value changes

The American Lumber Standard Committee Board of Review has approved the Southern Pine Inspection Bureau’s design value changes for all sizes and grades of visually graded Southern Pine dimension lumber.

| Feb 6, 2013

CEIR seeks public input on draft of PV racking and attachment document

The Center for Environmental Innovation in Roofing (CEIR) has released the first public draft of PV Racking and Attachment Criteria for Effective Low Slope Metal Panel Roof System Integrationfor an initial round of public comment.

| Feb 6, 2013

Insurance Institute demonstration shows advantages of following wind resistance standards

A demonstration by the Insurance Institute for Business and Home Safety shows how powerful winds affect concrete-and-steel buildings built with different techniques.

| Jan 31, 2013

Proposed ASHRAE legionellosis prevention standard open for third public comment

Changes to a proposed ASHRAE legionellosis prevention standard associated with building water systems are open for public comment.

| Jan 31, 2013

More severe wind storms should prompt nationwide reexamination of building codes, says insurance expert

The increased number and severity of storms with high winds nationally should prompt a reexamination of building codes in every community, says Mory Katz, vice president, Verisk Insurance Solutions Commercial Property, Jersey City, N.J.

| Jan 31, 2013

California Building Standards Commission adopts 2013 code update

The California Building Standards Commission adopted the new 2013 state standards code that includes new energy code provisions, accessibility standards, green building and water use modifications.

| Jan 25, 2013

D.C. authority wants to halt sewer tunnel projects while investigating green stormwater alternatives

The District of Columbia Water and Sewer Authority has proposed suspending a tunnel-building project.

| Jan 25, 2013

Energy modeling needed to overcome ‘plug load problem’ to meet high green standards

Plug loads illustrate how much end-users impact overall building energy use.

boombox1 - default
boombox2 -
native1 -

More In Category

Contractors

AGC releases decarbonization playbook to help assess, track, reduce GHG emissions

The Associated General Contractors of America released a new, first-of-its-kind, decarbonization playbook designed to help firms assess, track, and reduce greenhouse gas emissions on projects. The AGC Playbook on Decarbonization and Carbon Reporting in the Construction Industry is part of the association’s efforts to make sure construction firms play a leading role in crafting carbon-reduction measures for the industry.




Standards

Design guide offers details on rain loads and ponding on roofs

The American Institute of Steel Construction and the Steel Joist Institute recently released a comprehensive roof design guide addressing rain loads and ponding. Design Guide 40, Rain Loads and Ponding provides guidance for designing roof systems to avoid or resist water accumulation and any resulting instability.

halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021