Major building industry groups the International Code Council (ICC), ASHRAE, the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IES), and the U.S. Green Building Council (USGBC) have agreed to collaborate on the development of Standard 189.1, the International Green Construction Code (IgCC), and the LEED green building program.
The groups aim to create a comprehensive framework for jurisdictions looking to implement and adopt green building regulations and codes and/or provide incentives for voluntary programs such as LEED. The agreement outlines the development, maintenance, and implementation of new versions of ANSI/ASHRAE/IES/USGBC Standard 189.1, Standard for the Design of High-Performance, Green Buildings Except Low-Rise Residential Buildings, and the IgCC, which will be combined into one regulatory tool. The agreement sets out to align the LEED program with the new code to ensure a streamlined, effective set of regulatory and above-code options for states and communities.
“This agreement, which underscores the AIA’s dedication to sustainable design and construction, should lead to more rapid adoption of responsible approaches by designers, builders, developers and a host of other building industry groups,” said AIA CEO Robert Ivy, FAIA.
“ASHRAE sees this as a move forward in green building, reducing fragmentation of compliance documents for users who are pressing toward a more sustainable environment,” ASHRAE President Tom Phoenix said.
(http://us5.campaign-archive2.com/?u=ca55cb2e5c853bc823c1f59af&id=4cfd82f2f0&e=e4f9394553)
Related Stories
| Dec 22, 2011
Federal home weatherization program has impacted 6.8 million homes
More than 6.8 million homes have been weatherized using federal, state, utility, and other funds under the American Recovery and Reinvestment Act.
| Dec 22, 2011
Group developing BIM data standards
A collaboration among Georgia Tech’s Digital Building Lab, the Precast Concrete Institute, the American Concrete Institute, and the American Institute of Steel Construction aims to develop global standards for transportation of three-dimensional digital models among fabricator, architecture, engineering, and construction groups.
| Dec 22, 2011
New green code spells out thermal requirement for roof retrofits
The 2012 International Green Construction Code (IgCC) includes a straightforward approach to minimum thermal requirements for roof and wall systems.
| Dec 22, 2011
AGC’s safety conference Jan. 11-13 in San Antonio
The Associated General Contractors of America’s national meeting for safety and health professionals will take place Jan. 11-13, 2012 in San Antonio, TX.
| Dec 22, 2011
Proposed New York City zoning revamp encourages rooftop solar and wind energy
New zoning regulation proposals to make it easier for building owners in New York City to make their structures more sustainable have entered the public approval process.
| Dec 15, 2011
Dayton, Ohio schools saving $2.6 million annually by building to LEED
On average, green schools save about $100,000 a year on operating costs, including energy and water savings.
| Dec 15, 2011
Building to LEED standards can pose new risks for construction workers
Workers on these projects suffer a 24% increase in falls to lower levels during roof work, which researchers attributed to the installation of solar panels, and a few other risks.
| Dec 15, 2011
NRDC charges Maine governor with weakening green wood requirement
The FSC program is administered through the Leadership in Energy and Environmental Design (LEED) and requires wood to be harvested in a sustainable way.
| Dec 15, 2011
Post-tornado, Tuscaloosa seeks to create walkable urban, retail areas
Block sizes initially were limited to a maximum perimeter of 1,750 feet, with no side of the block being longer than 500 feet.
| Dec 15, 2011
Allentown, Pa. city council asked to repeal union-friendly law
The mayor of Allentown, Pa. asked the City Council to repeal a year-old ordinance that forces contractors to hire union workers for large city projects funded with state and federal dollars.
