flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

FAA issues final rule on commercial use of drones

Drones

FAA issues final rule on commercial use of drones

The rule covers commercial uses for drones that weigh less than 55 pounds, and it takes effect Aug. 29.


By Peter Fabris, Contributing Editor | July 13, 2016
FAA issues final rule on commercial use of drones

Photo: Paul Cooper/Creative Commons.

The Federal Aviation Administration issued a final rule on the operation and certification of non-hobbyist drones. 

The rule covers commercial uses for drones that weigh less than 55 pounds, and it takes effect Aug. 29. 

Operational limitations include:

  • Visual line-of-sight (VLOS) only 
  • Drone must remain within VLOS of the remote pilot in command and the person manipulating the flight controls. Alternatively, the unmanned aircraft must remain within VLOS of the visual observer.
  • Drone must remain close enough to the remote pilot in command and the person manipulating the flight controls for those people to be capable of seeing the aircraft with vision unaided by any device other than corrective lenses.
  • Small unmanned aircraft may not operate over any persons not directly participating in the operation, not under a covered structure, and not inside a covered stationary vehicle.
  • Daylight-only operations, or civil twilight (30 minutes before official sunrise to 30 minutes after official sunset, local time) with appropriate anti-collision lighting.
  • Maximum altitude of 400 feet above ground level (AGL) or, if higher than 400 feet AGL, remain within 400 feet of a structure.
  • No operations from a moving vehicle unless the operation is over a sparsely populated area.
  • The final rule includes the option to apply for a certificate of waiver on some of the operational limitations if the proposed operation can be performed safely.  An online portal will be made available by the FAA to apply for such waivers.

Related Stories

Laboratories | Jul 24, 2020

Customized labs give universities a recruiting edge

CO Architects is among a handful of firms that caters to this trend.

Drones | Mar 11, 2020

AI takes flight

Drones keep getting smarter. How will they fit into construction workflow?

AEC Tech | Feb 13, 2020

Exclusive research: Download the final report for BD+C's Giants 300 Technology and Innovation Study

This survey of 130 of the nation's largest architecture, engineering, and construction firms tracks the state of AEC technology adoption and innovation initiatives at the AEC Giants.

AEC Tech | Jan 29, 2018

thyssenkrupp tests self-driving robot for ‘last mile’ delivery of elevator parts

“With driverless delivery robots, we could fill a gap and get spare parts from our warehouses to the jobsite faster,” said thyssenkrupp SVP Ivo Siebers.

Codes and Standards | Jan 26, 2018

Flying drones while inebriated now illegal in New Jersey

Violators could be sentenced to six months in jail.

Drones | Nov 3, 2017

MyDefence Communication's anti-drone system says 'No drone for you!'

The new anti-drone system looks to protect stadiums, prisons, and other sensitive buildings and sites from unwanted UAV flights.

Codes and Standards | Sep 26, 2017

Anti-drone technology can ward off unauthorized drone flights

The technology can be used to prevent terrorist attacks and spying.

3D Printing | Jun 14, 2017

This is the world’s first building completely 3D printed onsite

The building is a lab for research on drones and 3D printing technology.

Drones | Mar 8, 2017

Do's and don'ts for operating drones

Some estimate 85-90% of drone operators aren’t FAA certified under the agency’s Part 107 rules or aren’t covered by liability insurance.

Drones | Mar 8, 2017

Flight plan: Drones fill the skies over construction sites

More AEC firms are boarding, as new FAA rules ease restrictions on operating unmanned aerial vehicles armed with sensors and cameras.

boombox1 - default
boombox2 -
native1 -

More In Category



Sustainability

Increased focus on sustainability is good for business and attracting employees

A recent study, 2023 State of Design & Make by software developer Autodesk, contains some interesting takeaways for the design and construction industry. Respondents to a survey of industry leaders from the architecture, engineering, construction, product design, manufacturing, and entertainment spheres strongly support the idea that improving their organization’s sustainability practices is good for business.


halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021