flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

A European manufacturer says its engineered wood products can store carbon for decades

Wood

A European manufacturer says its engineered wood products can store carbon for decades

Metsä Wood’s laminated veneer lumber was used to create the exterior wall panels of a 17,000-square-meter concrete plant in Germany.


By Novid Parsi, Contributing Editor | November 1, 2022
Metsa Wood Group ext
Courtesy Metsa Wood.

Metsä Wood, a Finland-based manufacturer of engineered wood products, says its sustainable, material-efficient products can store carbon for decades, helping to combat climate change. 

To build its new concrete plant of 17,000 square meters, German construction specialist Brüninghoff, which makes prefabricated wooden materials, such as laminated veneer lumber, wanted to use materials that fit its sustainability strategy. So the company chose Kerto LVL—prefabricated panels and studs made by Metsä Wood—for the plant’s exterior non-load-bearing walls. The panels were attached to load-bearing concrete frames. 

Metsä Wood’s Kerto LVL, a structural laminated veneer lumber, takes up less volume than other wood materials and also has an excellent strength-to-weight ratio. In addition to supporting the sustainability strategy, Kerto LVL led to optimized assembly times.

The Brüninghoff plant has a total of 239 wall elements with an area of around 5,000 square meters. It used a total of 242 cubic meters of Kerto LVL. The team used a carbon storage calculator to determine that the Kerto LVL stores 165.8 metric tons of carbon dioxide equivalent (a unit based on global warming potential)—meaning that, compared to other construction materials, the wood in Metsä Wood’s product is “highly sustainable,” the company says.

“Through this construction, we are forcing structural change towards construction that supports circular economy. Change is needed as the construction sector is responsible for consuming huge quantities of resources. It is a question of optimizing construction methods, developing low-emission concepts, and increasingly backing recycling solutions,” Frank Steffens, managing director, Brüninghoff, said in a statement.

The building has already received pre-certification per the ecological, economic, and social criteria of the German Society for Sustainable Construction (DGNB).

Metsa Wood Group ext 2
Courtesy Metsa Wood.
Metsa Wood Group int
Courtesy Metsa Wood.
Metsa Wood Group int 2
Courtesy Metsa Wood.
Metsa Wood Group int 3
Courtesy Metsa Wood.

 

Related Stories

Wood | Apr 26, 2015

Building wood towers: How high is up for timber structures?

The recent push for larger and taller wood structures may seem like an architectural fad. But Building Teams around the world are starting to use more large-scale structural wood systems. 

Museums | Apr 10, 2015

Henning Larsen Architects designs timber museum extension in Sweden

The new extension will complement Österund’s wooded surroundings

High-rise Construction | Mar 24, 2015

Timber high-rise residential complex will tower over Stockholm waterfront

The four towers, 20 stories each, will be made entirely out of Swedish pine, from frame to façade.

Multifamily Housing | Mar 18, 2015

Prefabricated skycubes proposed with 'elastic' living apartments inside

The interiors for each unit are designed using an elastic living concept, where different spaces are created by sliding on tracks.

Wood | Feb 3, 2015

16 stunning wood buildings win 2015 Wood Design Awards

Jackson Hole (Wyo.) Airport and Stapleton Library in Staten Island, N.Y., are among the projects honored by WoodWorks.

Sponsored | | Dec 30, 2014

Case studies: Engineered wood brings cost savings, design flexibility across commercial project types

For commercial architects facing increasing pressure to design innovative structures while simultaneously cutting costs and accommodating tight deadlines, engineered wood systems are providing a welcome solution. 

Sponsored | | Dec 5, 2014

Best practices for force transfer around openings

As wood-frame construction is continuously evolving, designers in many parts of the U.S. are optimizing design solutions that require the understanding of force transfer between elements in the lateral load-resisting system. 

Sponsored | | Nov 19, 2014

Robust structural frame supports historic building renovation in Newport, R.I.

The Audrain Building on Newport’s celebrated Bellevue Avenue was designed by New York architect Bruce Price in the early 1900s with intricate exterior detailing that exudes an enduring sense of luxury and tradition. 

| Nov 6, 2014

Hines planning tall wood office building in Minneapolis

The Houston-based developer is planning a seven-story wood-framed office building in Minneapolis’ North Loop that will respect the neighborhood’s historic warehouse district look.

Sponsored | | Nov 5, 2014

How to maximize affordability and sustainability through all-wood podiums

Wood podium construction takes an age-old material and moves it into the 21st century. 

boombox1 - default
boombox2 -
native1 -

More In Category

Mass Timber

Bjarke Ingels Group designs a mass timber cube structure for the University of Kansas

Bjarke Ingels Group (BIG) and executive architect BNIM have unveiled their design for a new mass timber cube structure called the Makers’ KUbe for the University of Kansas School of Architecture & Design. A six-story, 50,000-sf building for learning and collaboration, the light-filled KUbe will house studio and teaching space, 3D-printing and robotic labs, and a ground-level cafe, all organized around a central core.




halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021