flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

Denver unveils renewable heating and cooling plan

Codes and Standards

Denver unveils renewable heating and cooling plan

City releases roadmap to decarbonizing existing homes and buildings.


By Peter Fabris, Contributing Editor | June 23, 2021

The City of Denver has released a plan to decarbonize existing homes and buildings within the city limits and beyond to Denver County.

The heart of the plan is to replace traditional gas space and water heating appliances with electric heat pumps that are powered by renewable energy. The city moved ahead with the initiative buoyed by a commitment made by Xcel Energy, Denver’s utility, to generate 80% of Denver’s electricity by renewables by 2030.

Today, 97% of natural gas consumed in buildings and homes is used for space and water heat, the city says. Emissions from these uses account for 24% of Denver’s total greenhouse gas emissions.

The city says that under the plan, 66% of homes, 69% of multifamily units, and 49% of commercial buildings can be fully electrified when existing systems reach their end of life. This would keep total capital and operating costs within 10% of baseline costs under existing electricity and gas rates.

The plan strives for racial and economic equity in achieving these goals in a “managed transition” to electrification.

Related Stories

| Apr 17, 2013

Army's FY 2014 $130 billion budget includes $2.3 billion for construction

The U.S. Army submitted a $129.7 billion budget for fiscal year 2014, $2.3 billion of which is allocated for military construction, army family housing, and base realignment and closure.

| Apr 17, 2013

Leonardo Academy to develop sustainability master plan standard

Leonardo Academy launched the development of a standard for sustainability master plans using the American National Standards Institute (ANSI) process to define sustainability goals and achievements for regions, states and campuses.

| Apr 17, 2013

Fenestration Council allows some shading system, dynamic glazing to be rated for U-Factor

The National Fenestration Rating Council (NFRC) approved changes to its NFRC 100 and NFRC 200 standards, allowing certain shading devices to be rated for U-factor and Solar Heat Gain Coefficient.

| Apr 17, 2013

LEED 2009 quarterly interpretations, addenda now available

Quarterly interpretations and addenda to the LEED 2009 rating systems and reference guides are now available.

| Apr 17, 2013

DOE’s Lawrence Berkeley Lab researchers developing new indoor air pollution standards

The U.S. Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab) researchers are working on new building standards after discovering previously unknown indoor air pollutants.

| Apr 16, 2013

RMJM acquired by Duthus Investments for £12 million

  Sir Fraser Morrison, the owner and chairman of architect RMJM, is the backer behind the investment firm that bought RMJM for £11m in late March.

| Apr 10, 2013

ASHRAE publishes second edition to HVAC manual for healthcare facilities

The American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) has published a second edition of its “HVAC Design Manual for Hospitals and Clinics.”

| Apr 10, 2013

Concrete Reinforcing Steel Institute accredited by ANSI as standards developer

The Concrete Reinforcing Steel Institute (CRSI) was recently accredited by the American National Standards Institute (ANSI) as an ANSI Accredited Standards Developer (ASD).

| Apr 10, 2013

DOD should continue LEED-Silver or equivalent rating standard, says NRC

The Department of Defense should continue to require that its new buildings or major renovations to facilities be designed to achieve a LEED-Silver or equivalent rating, says a new report from the National Research Council.

| Apr 10, 2013

EPA proposes emissions rules affecting light construction vehicles

The Environmental Protection Agency has proposed air-pollution standards that it says will reduce the amount of sulfur in U.S. gasoline by two-thirds and impose fleet-wide pollution limits on new vehicles.

boombox1 - default
boombox2 -
native1 -

More In Category

MFPRO+ News

World’s largest 3D printer could create entire neighborhoods

The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.


Contractors

AGC releases decarbonization playbook to help assess, track, reduce GHG emissions

The Associated General Contractors of America released a new, first-of-its-kind, decarbonization playbook designed to help firms assess, track, and reduce greenhouse gas emissions on projects. The AGC Playbook on Decarbonization and Carbon Reporting in the Construction Industry is part of the association’s efforts to make sure construction firms play a leading role in crafting carbon-reduction measures for the industry.



halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021