flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

A brief history of windows in America

A brief history of windows in America

Historic window experts from Hoffmann Architects look back at the origin of windows in the U.S.


By Hoffmann Architects | June 28, 2013
It’s easy to lose sight of the significance of historic windows when all they seem to contribute to the building aesthetic is peeling paint, rotting wood, corroding steel, or broken glass. To appreciate the architectural worth of aging windows, we must look back, briefly, at their origins.
 
The earliest American windows were wood casement windows, hinged at the sides. By the early 1800s, sliding single- and double-hung windows had come into popular use. However, devastating fires in a number of U.S. cities during the late 19th century led to the widespread adoption of strict fire codes, which decreased the prevalence of wood windows.
 
At the same time, the Industrial Revolution brought about major advances in rolled steel, permitting the mass production of steel windows. These fire-resistant frames and sashes became the standard for factories and commercial buildings, as well as for larger residential and university buildings, while wood windows continued to dominate the single-family residential market.
 
Steel remained the primary material for industrial, commercial, and institutional windows in the United States well into the 20th century. The strength of steel permitted larger expanses of glass, which enabled the thin profiles and repeated window patterns of Art Deco and early Modernist buildings. Then, after World War II, aluminum windows gained popularity due to their lower price and non-corroding properties. Toward the end of the 20th century, wood windows also fell out of fashion, as many homeowners replaced the original windows on their turn-of-the-century houses with vinyl, both for its inexpensiveness and for its promise of minimal maintenance.
 
Unfortunately, the replacement of original wood or steel windows with cheaper materials can significantly impact building appearance. Aluminum, for example, is much weaker than steel, requiring bulkier frame profiles that can destroy the delicate look afforded by multi-pane steel windows. Likewise, vinyl may discolor and warp over time, making it a far less durable material over the long term than the original wood.
 
The good news for building owners is that options for treating deteriorated historic windows are plentiful. Energy-saving retrofits, repair, or parts replacement can restore existing windows to like-new functional condition. Should replacement be called for, it is often possible to locate or custom-make historic replicas that won’t compromise building character.

Related Stories

| Feb 15, 2011

Iconic TWA terminal may reopen as a boutique hotel

The Port Authority of New York and New Jersey hopes to squeeze a hotel with about 150 rooms in the space between the old TWA terminal and the new JetBlue building. The old TWA terminal would serve as an entry to the hotel and hotel lobby, which would also contain restaurants and shops.

| Feb 15, 2011

New Orleans' rebuilt public housing architecture gets mixed reviews

The architecture of New Orleans’ new public housing is awash with optimism about how urban-design will improve residents' lives—but the changes are based on the idealism of an earlier era that’s being erased and revised.

| Feb 15, 2011

LAUSD commissions innovative prefab prototypes for future building

The LA Unified School District, under the leadership of a new facilities director, reversed course regarding prototypes for its new schools and engaged architects to create compelling kit-of-parts schemes that are largely prefabricated.

| Feb 15, 2011

New 2030 Challenge to include carbon footprint of building materials and products

Architecture 2030 has just broadened the scope of its 2030 Challenge, issuing an additional challenge regarding the climate impact of building products. The 2030 Challenge for Products aims to reduce the embodied carbon (meaning the carbon emissions equivalent) of building products 50% by 2030.

| Feb 15, 2011

New Urbanist Andrés Duany: We need a LEED Brown rating

Andrés Duany advocates a "LEED Brown" rating that would give contractors credit for using traditional but low cost measures that are not easy to quantify or certify. He described these steps as "the original green," and "what we did when we didn't have money." Ostensibly, LEED Brown would be in addition to the current Silver, Gold and Platinum ratings.

| Feb 15, 2011

AIA on President Obama's proposed $1 billion investment in energy conservation

The President’s budget increases the value of investment in energy conservation in commercial buildings by roughly $1 billion, reports AIA 2011 President Clark Manus, FAIA. The significant increase from the current tax deduction of $1.80 per sq. ft. now on the books is an increase for which the AIA has been advocating in order to encourage energy conservation.

| Feb 14, 2011

Sustainable Roofing: A Whole-Building Approach

According to sustainability experts, the first step toward designing an energy-efficient roofing system is to see roof materials and systems as an integral component of the enclosure and the building as a whole. Earn 1.0 AIA/CES learning units by studying this article and successfully completing the online exam.

boombox1 - default
boombox2 -
native1 -

More In Category


AEC Tech

Lack of organizational readiness is biggest hurdle to artificial intelligence adoption

Managers of companies in the industrial sector, including construction, have bought the hype of artificial intelligence (AI) as a transformative technology, but their organizations are not ready to realize its promise, according to research from IFS, a global cloud enterprise software company. An IFS survey of 1,700 senior decision-makers found that 84% of executives anticipate massive organizational benefits from AI. 


Codes and Standards

Updated document details methods of testing fenestration for exterior walls

The Fenestration and Glazing Industry Alliance (FGIA) updated a document serving a recommended practice for determining test methodology for laboratory and field testing of exterior wall systems. The document pertains to products covered by an AAMA standard such as curtain walls, storefronts, window walls, and sloped glazing. AAMA 501-24, Methods of Test for Exterior Walls was last updated in 2015. 


MFPRO+ News

World’s largest 3D printer could create entire neighborhoods

The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.

halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021