The Boston City Council recently approved a mandate for major emissions cuts for large buildings.
The legislation is one of only a few of its kind in the country and will apply to buildings that are 20,000 sf or larger. That amounts to about 4% of the buildings in the city.
About 2,200 buildings that are 35,000 sf or larger will have to start meeting emissions caps in 2025. Another 1,300 buildings —20,000 sf or larger—must start meeting emissions caps by 2030. The ordinance aims to cut all those buildings’ emissions in half by the end of the decade and completely by 2050. A review board can receive input from financial experts and energy providers for recommendations on changes to the rules and on hardship compliance plans.
Acting Mayor Kim Janey is expected to soon sign the ordinance into law. It was modeled on similar measures in New York, St. Louis, and Washington, D.C.
Related Stories
| Nov 26, 2012
How to boost resilient systems that are sustainable
Cities of the future can be both more resilient and more sustainable by promoting strategies that include solar power and green roofs, programs that minimize demand for energy, rain gardens, and permeable pavement.
| Nov 26, 2012
Developer of nation’s first LEED platinum skyscraper focuses on carbon reduction
The Durst Organization, the developer of the first LEED platinum certified skyscraper in the country, says it will not seek LEED certification for its residential pyramid planned for New York’s West 57th Street.
| Nov 26, 2012
Questions linger over ability of Miami's newer high-rises to withstand hurricanes
Some towers in Miami, rebuilt after a hurricane in 2005, were allowed to be constructed under older building codes instead of newer ones created after Hurricane Wilma.
| Nov 26, 2012
Changes in development and building standards needed for health of Potomac River
The Potomac River’s health stands to suffer if the region does not change its development and building standards, according to the Potomac Conservancy.
| Nov 16, 2012
South Dakota prefers LEED over building code on state projects
“(LEED is) much better than a mandatory building code because you get a little wiggle room in these projects,” said Mike Mueller, a spokesman for the South Dakota Bureau of Administration.
| Nov 16, 2012
AAMA publishes quality assurance guidelines for Polyamide Thermal Barriers
The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.
| Nov 16, 2012
New ANSI/BIFMA standards developed for educational seating
The American National Standards Institute (ANSI) has approved the newly developed safety and performance standard for educational seating: ANSI/BIFMA X6.1-2012—the first of its kind.
