flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

American Concrete Institute creates new director of innovative concrete technology post

Codes and Standards

American Concrete Institute creates new director of innovative concrete technology post

Aim is to attract emerging technologies for development.


By Peter Fabris, Contributing Editor | July 28, 2021
BD+C
BD+C

The American Concrete Institute (ACI) recently created a new position: Director of Innovative Concrete Technology.

Rex C. Donahey, Ph.D., currently Editor-in-Chief of ACI’s monthly magazine, Concrete International, was named to the post. He will focus on outreach with trade organizations, companies, and individuals to attract emerging technologies for development within ACI.

“The future well-being of the Institute depends on accommodating innovation and not being limited to existing technology and practices,” said Ronald G. Burg, ACI executive vice president. “ACI needs to be recognized as the professional organization of choice for developing new and emerging technologies. Adding a Director of Innovative Concrete Technology to ACI staff is essential to this effort and will keep ACI always advancing.”

Related Stories

| Oct 28, 2011

Bipartisan opposition to federal 3% withholding for contractors

Both major political parties and the Obama Administration support repealing a law that would withhold 3% of all government contracts.

| Oct 28, 2011

OSHA requires training module on top causes of construction deaths

The Occupational Health and Safety Administration (OSHA) now requires a training module on the top four causes of death for construction workers.

| Oct 28, 2011

New York City requiring building energy use to be posted online

Owners of every New York City commercial and residential building larger than 50,000 sf will have to post each building’s energy use online by 2013.

| Oct 28, 2011

New ISO standard for escalator safety

A new ISO standard specifies safety requirements for escalators and moving walks.

| Oct 20, 2011

LEED 2012 to require real-time energy, water use reporting

The LEED 2012 rating system, set to launch in November 2012, will contain features to make sure buildings function as intended, and improve over time.

| Oct 20, 2011

New York City moving to speedier, online design reviews

New York City is moving towards a development design review process that will let officials and developers review blueprints for new projects online in a virtual conference room rather than in person.

| Oct 20, 2011

Michigan bill would let private firms operate as a city’s building department

Michigan House Bill 5011 would change state’s building code to allow private companies to operate as a municipality's building department.

| Oct 20, 2011

Alabama’s strict immigration law drives away construction workers

Alabama's strict new immigration law is driving many construction workers and roofers from the state.

| Oct 20, 2011

Fed bill would allow school rehab funding via historic tax credits

Virginia Sens. Jim Webb (D) and Mark Warner (D) introduced a bill this month to rehab aging schools across the country through the use of historic tax credits.

| Oct 20, 2011

Process leads to new design values for southern pine and other visually graded dimension lumber

A summary of the process used to develop new design values will clarify many of the questions received by the SFPA.

boombox1 - default
boombox2 -
native1 -

More In Category


AEC Tech

Lack of organizational readiness is biggest hurdle to artificial intelligence adoption

Managers of companies in the industrial sector, including construction, have bought the hype of artificial intelligence (AI) as a transformative technology, but their organizations are not ready to realize its promise, according to research from IFS, a global cloud enterprise software company. An IFS survey of 1,700 senior decision-makers found that 84% of executives anticipate massive organizational benefits from AI. 


Codes and Standards

Updated document details methods of testing fenestration for exterior walls

The Fenestration and Glazing Industry Alliance (FGIA) updated a document serving a recommended practice for determining test methodology for laboratory and field testing of exterior wall systems. The document pertains to products covered by an AAMA standard such as curtain walls, storefronts, window walls, and sloped glazing. AAMA 501-24, Methods of Test for Exterior Walls was last updated in 2015. 


MFPRO+ News

World’s largest 3D printer could create entire neighborhoods

The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.

halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021