flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

AIA, MIT issue joint report on impact of design on public health

AIA, MIT issue joint report on impact of design on public health

The research looks at the health of eight U.S. cities and lays out a path for translating the research into meaningful findings for policy makers and urban planners. 


By AIA | December 13, 2013

The American Institute of Architects and MIT’s Center for Advanced Urbanism today announced the completion of their initial research report on eight cities and urban health, and laid out a path for translating this research into meaningful findings for policy makers and urban planners. You can see the full report here.

More than half of the world’s inhabitants live in urban areas, and this is projected to grow to 70 percent by 2050. Massive urbanization can negatively affect human and environmental health in unique ways, and many of those effects can be addressed through the realm of design. Some of the great health challenges over the next century, including the prevalence of obesity, asthma, cardiovascular disease, diabetes, and depression, among others, are both increasing at an alarming rate and frequently linked to socioeconomic factors, physical design and urban environmental factors.

“What this research represents is our first attempt to examine an array of urban health matters in eight major metropolitan areas in the United States, and to suggests a wide array of possible remedies, from better transportation planning to landscape retrofits,” said AIA Chief Executive Officer Robert Ivy, FAIA. “As we go forward, this collaboration will seek design recommendations that can be individualized to urban markets.” 

“I would like in particular to congratulate the dozen or so students at MIT’s Center for Advanced Urbanism and in particular Alan Berger, professor of landscape architecture and urban design, and Andrew Scott, associate professor of architecture, for the incredible amount of effort and insight that went into compiling this report,” Ivy said.

 

 

“This research begins to unearth a truth that urban planners for many years have not realized, which is that there is no silver bullet for urban health,” says Adèle Naudé Santos, Dean of the School of Architecture + Planning at MIT. “Every city has different socioeconomic and physical layout issues. So the solution to make urban health better is going to [vary] in every city. One of the reasons we wrote the report was to give people a sense that the silver-bullet mentality, from technological or policy perspectives, needs to stop.” 

“If we really want to look at urban health, we have to look across the entire metropolitan area that’s been urbanized in order to address the systems that make it perform,” said Berger. “You can’t look at a building without thinking about how people get to that building. The holistic way we look at cities here at MIT is that a city is a metropolitan area with all kinds of different fabrics, in terms of transit, economics, industry, the environment, and more.”

The report covers research that so far has been conducted in eight American cities - Atlanta, Houston, LA, San Francisco, Chicago, Minneapolis, Boston and New York. Teams of researchers have fanned out in each city to gather data about each city’s major design projects. The next step is to determine which city will serve as the ultimate laboratory for design solutions that can have a major impact on public health.

“Over the coming semester we will enter into discussions with city leaders, foundations, and local businesses to figure out where we can do the most good through collaboration on creating design solutions that improve urban health environments,” said Santos. “The research we have done so far sets the framework; what comes next is the real effort to come up with reliable design solutions to the health crisis facing America’s cities.”

About the American Institute of Architects
For over 150 years, members of the American Institute of Architects have worked with each other and their communities to create more valuable, healthy, secure, and sustainable buildings and cityscapes. Members adhere to a code of ethics and professional conduct to ensure the highest standards in professional practice. Embracing their responsibility to serve society, AIA members engage civic and government leaders and the public in helping find needed solutions to pressing issues facing our communities, institutions, nation and world. Visit www.aia.org.

About the MIT, Center for Advanced Urbanism
Established in 2012, the MIT Center for Advanced Urbanism’s objective is to become the world’s pre-eminent cultural center about the design of metropolitan environments, by articulating methods and projects to integrate separate disciplinary agendas in architecture, landscape, ecology, transportation engineering, politics and political philosophy, technology and real estate through a most eloquent design culture on scales ranging from the complex infrastructural intersection, to that of a neighborhood, on to the scale of an entire regional system.

Related Stories

Healthcare Facilities | Mar 18, 2024

A modular construction solution to the mental healthcare crisis

Maria Ionescu, Senior Medical Planner, Stantec, shares a tested solution for the overburdened emergency department: Modular hub-and-spoke design.

Codes and Standards | Mar 18, 2024

New urban stormwater policies treat rainwater as a resource

U.S. cities are revamping how they handle stormwater to reduce flooding and capture rainfall and recharge aquifers. New policies reflect a change in mindset from treating stormwater as a nuisance to be quickly diverted away to capturing it as a resource.

Plumbing | Mar 18, 2024

EPA to revise criteria for WaterSense faucets and faucet accessories

The U.S. Environmental Protection Agency (EPA) plans to revise its criteria for faucets and faucet accessories to earn the WaterSense label. The specification launched in 2007; since then, most faucets now sold in the U.S. meet or exceed the current WaterSense maximum flow rate of 1.5 gallons per minute (gpm). 

MFPRO+ New Projects | Mar 18, 2024

Luxury apartments in New York restore and renovate a century-old residential building

COOKFOX Architects has completed a luxury apartment building at 378 West End Avenue in New York City. The project restored and renovated the original residence built in 1915, while extending a new structure east on West 78th Street. 

Multifamily Housing | Mar 18, 2024

YWCA building in Boston’s Back Bay converted into 210 affordable rental apartments

Renovation of YWCA at 140 Clarendon Street will serve 111 previously unhoused families and individuals.

Healthcare Facilities | Mar 17, 2024

5 criteria to optimize medical office design

Healthcare designers need to consider privacy, separate areas for practitioners, natural light, outdoor spaces, and thoughtful selection of materials for medical office buildings.

Construction Costs | Mar 15, 2024

Retail center construction costs for 2024

Data from Gordian shows the most recent costs per square foot for restaurants, social clubs, one-story department stores, retail stores and movie theaters in select cities.

Architects | Mar 15, 2024

4 ways to streamline your architectural practice

Vessel Architecture's Lindsay Straatmann highlights four habits that have helped her discover the key to mastering efficiency as an architect.

Healthcare Facilities | Mar 15, 2024

First comprehensive cancer hospital in Dubai to host specialized multidisciplinary care

Stantec was selected to lead the design team for the Hamdan Bin Rashid Cancer Hospital, Dubai’s first integrated, comprehensive cancer hospital. Named in honor of the late Sheikh Hamdan Bin Rashid Al Maktoum, the hospital is scheduled to open to patients in 2026.

Codes and Standards | Mar 15, 2024

Technical brief addresses the impact of construction-generated moisture on commercial roofing systems

A new technical brief from SPRI, the trade association representing the manufacturers of single-ply roofing systems and related component materials, addresses construction-generated moisture and its impact on commercial roofing systems.

boombox1 - default
boombox2 -
native1 -

More In Category


AEC Tech

Lack of organizational readiness is biggest hurdle to artificial intelligence adoption

Managers of companies in the industrial sector, including construction, have bought the hype of artificial intelligence (AI) as a transformative technology, but their organizations are not ready to realize its promise, according to research from IFS, a global cloud enterprise software company. An IFS survey of 1,700 senior decision-makers found that 84% of executives anticipate massive organizational benefits from AI. 


Codes and Standards

Updated document details methods of testing fenestration for exterior walls

The Fenestration and Glazing Industry Alliance (FGIA) updated a document serving a recommended practice for determining test methodology for laboratory and field testing of exterior wall systems. The document pertains to products covered by an AAMA standard such as curtain walls, storefronts, window walls, and sloped glazing. AAMA 501-24, Methods of Test for Exterior Walls was last updated in 2015. 


MFPRO+ News

World’s largest 3D printer could create entire neighborhoods

The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.

halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021