flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

2018 International Green Construction Code released

Codes and Standards

2018 International Green Construction Code released

Updated version helps governments streamline code development and adoption.


By Peter Fabris, Contributing Editor | November 16, 2018

Courtesy Pixabay

The 2018 International Green Construction Code (2018 IgCC) has been released.

The 2018 IgCC is a joint initiative of the U.S. Green Building Council (USGBC), International Code Council (ICC), ASHRAE, and the Illuminating Engineering Society (IES). It aligns the technical requirements of ANSI/ASHRAE/ICC/USGBC/IES 189.1-2017-Standard for the Design of High-Performance Green Buildings Except Low Rise Residential Buildings with ICC’s multi-stakeholder IgCC.

The updated version will help governments streamline code development and adoption, according to an ASHRAE news release. “The 2018 IgCC is now a unified code that emphasizes adoption, ease of use, and enforcement for building projects,” the release says.

 “Our hope is that building professionals and policymakers alike adopt better, greener building strategies that help them better implement LEED and achieve higher performance in sustainability,” said Mahesh Ramanujam, president and CEO, USGBC.

Related Stories

| Jun 5, 2012

Baltimore officials vow to block $1.8 billion urban renewal project

Baltimore officials want to block a $1.8 billion urban renewal project until more neighborhood residents and minority contractors are hired and displaced residents can benefit from the revitalization.

| Jun 5, 2012

OSHA launches campaign to warn of heat dangers in outdoor work

The Occupational Safety and Health Administration has begun a campaign to warn outdoor workers about the dangers of heat exposure.

| Jun 5, 2012

AGC’s Safety and Health Conference focuses on regulations, legislation

More than 150 industry professionals and other attendees will participate in the Associated General Contractors of America’s (AGC’s) safety and health conference July 11-13 in Washington, D.C.

| Jun 1, 2012

New BD+C University Course on Insulated Metal Panels available

By completing this course, you earn 1.0 HSW/SD AIA Learning Units.

| May 31, 2012

Proposed change in Michigan’s building code would hurt innovation, say critics

Legislation pending before the Michigan Senate would change the law that calls for building codes to be updated every three years to require an update only every six years.

| May 31, 2012

Natural gas industry opposes federal carbon-neutral construction rule

The natural gas industry and some allies are working to block a federal green building rule that was expected to be a national model for carbon-neutral construction.

| May 31, 2012

Lawsuits push the legal boundaries of green building definition

This article explores some legal issues stemming from lawsuits in which plaintiffs have charged developers with not delivering on a promised level of sustainability.  

| May 31, 2012

ANSI approves Green Building Initiative’s design standard

The Green Building Initiative (GBI), a Portland, Ore. nonprofit organization, has had its new consensus-based standard for the design, construction, and operations of environmentally friendly buildings approved by the American National Standards Institute (ANSI).

| May 31, 2012

USGBC testing Minnesota buildings to see if they are living up to LEED standards

The Minnesota chapter of the U.S. Green Building Council (USGBC) has teamed up with EnergyPrint, a St. Paul, Minn. energy consulting firm, to study the energy and water use of more than 150 buildings in the state that have LEED certification.

boombox1 - default
boombox2 -
native1 -

More In Category

MFPRO+ News

World’s largest 3D printer could create entire neighborhoods

The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.


Contractors

AGC releases decarbonization playbook to help assess, track, reduce GHG emissions

The Associated General Contractors of America released a new, first-of-its-kind, decarbonization playbook designed to help firms assess, track, and reduce greenhouse gas emissions on projects. The AGC Playbook on Decarbonization and Carbon Reporting in the Construction Industry is part of the association’s efforts to make sure construction firms play a leading role in crafting carbon-reduction measures for the industry.



halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021