flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

Regulator holding back climate-friendly, energy-saving equipment deployment, critics say

Codes and Standards

Regulator holding back climate-friendly, energy-saving equipment deployment, critics say

Heat pumps, solar power could be made more accessible for low-income communities in Massachusetts.


By Peter Fabris, Contributing Editor | January 12, 2022
Solar panels

Courtesy Pixabay

Critics are charging that the Massachusetts Department of Public Utilities is hindering the prospects for low-income communities to save money on energy via community solar projects and other energy efficiency measures that benefit the climate.

According to a report in the Boston Globe, critics say about 20,000 low-income households could be getting solar energy credits that would save them money, but bureaucratic inertia at the state agency is holding back progress. The agency cited the need for additional layers of approval that will take an indeterminate amount of time to work through.

The state’s Energy and Environment Agency, which oversees the DPU, says the department faces limits set by existing statutes, and needs to move ahead cautiously as it sets a template for renewable projects. The DPU logjams may need to be resolved either by the state legislature or by the state’s highest court, the Globe reported.

Related Stories

| Nov 26, 2012

Minnesota law to spur development, job creation produced few jobs

Legislation that allowed local governments to direct excess property tax dollars from tax-increment financing districts into other private developments was supposed to kick-start construction hiring in Minnesota.

| Nov 26, 2012

How to boost resilient systems that are sustainable

Cities of the future can be both more resilient and more sustainable by promoting strategies that include solar power and green roofs, programs that minimize demand for energy, rain gardens, and permeable pavement.

| Nov 26, 2012

Developer of nation’s first LEED platinum skyscraper focuses on carbon reduction

The Durst Organization, the developer of the first LEED platinum certified skyscraper in the country, says it will not seek LEED certification for its residential pyramid planned for New York’s West 57th Street.

| Nov 26, 2012

Questions linger over ability of Miami's newer high-rises to withstand hurricanes

Some towers in Miami, rebuilt after a hurricane in 2005, were allowed to be constructed under older building codes instead of newer ones created after Hurricane Wilma.

| Nov 26, 2012

Changes in development and building standards needed for health of Potomac River

The Potomac River’s health stands to suffer if the region does not change its development and building standards, according to the Potomac Conservancy.

| Nov 16, 2012

South Dakota prefers LEED over building code on state projects

“(LEED is) much better than a mandatory building code because you get a little wiggle room in these projects,” said Mike Mueller, a spokesman for the South Dakota Bureau of Administration.

| Nov 16, 2012

AAMA publishes quality assurance guidelines for Polyamide Thermal Barriers

The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.

boombox1 - default
boombox2 -
native1 -

More In Category


AEC Tech

Lack of organizational readiness is biggest hurdle to artificial intelligence adoption

Managers of companies in the industrial sector, including construction, have bought the hype of artificial intelligence (AI) as a transformative technology, but their organizations are not ready to realize its promise, according to research from IFS, a global cloud enterprise software company. An IFS survey of 1,700 senior decision-makers found that 84% of executives anticipate massive organizational benefits from AI. 


Codes and Standards

Updated document details methods of testing fenestration for exterior walls

The Fenestration and Glazing Industry Alliance (FGIA) updated a document serving a recommended practice for determining test methodology for laboratory and field testing of exterior wall systems. The document pertains to products covered by an AAMA standard such as curtain walls, storefronts, window walls, and sloped glazing. AAMA 501-24, Methods of Test for Exterior Walls was last updated in 2015. 


MFPRO+ News

World’s largest 3D printer could create entire neighborhoods

The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.

halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021