flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

PVs play new roles as a teaching tool

PVs play new roles as a teaching tool

Solar installations are helping K-12 schools around the country save money and teach students the intricacies of renewable energy sources.


By By Susan Bady, Contributing Editor | September 12, 2011
Solar thermal collectors, oriented vertically on the wall, heat water for the Walking Mountains Science Center in Avon, Colo.
This article first appeared in the September 2011 issue of BD+C.

Federal and state incentives have sparked renewed interest in solar photovoltaic systems as a way for K-12 schools to lower their utility bills and, at the same time, educate students about the benefits of solar and other alternative energy sources.

Solar PV providers in California, Colorado, Massachusetts, New Jersey, and Utah are partnering with school districts to install solar equipment and develop a teaching curriculum. Funding can come from a variety of government and private sources, with the bulk coming from the American Reinvestment and Recovery Act of 2009.

Some organizations are sponsoring their own solar-school initiatives in conjunction with the National Energy Education Development Project (NEED). The Walmart Foundation is partnering with NEED and the Foundation for Environmental Education to implement solar schools in five cities: Chicago, Los Angeles, Minneapolis, Seattle, and Washington, D.C.

UTAH PUTS THE SUN TO WORK

Utah’s Solar for Schools program was launched in 2010, after the state received ARRA funding to install and promote renewable energy. The Salt Lake City office of Johnson Controls, Inc. won a $3 million bid to install solar in 73 Utah schools. Thus far, 55 installations had been completed.

Oscar Rangel, JCI’s manager of public-sector solutions, based in Denver, says the company’s system will save $7.75 per watt, for a potential annual savings of $800-1,200. Rangel stresses that there’s more to the program than putting panels on the roof: “There’s also an educational component that involves the teachers, the kids, and the administration.” 

In an intensive one-day workshop developed by Johnson Controls and the National Energy Foundation, teachers from around the Beehive State were exposed to curriculum materials that are correlated to state and national standards. NEF educators provide on-site teacher training geared to children from elementary school through high school.

“The labs are very hands-on, with activities that engage the students in learning not just about solar, but all different kinds of alternative energy,” says one participant, Laura Wheeler, who teaches middle school and high school in Morgan, Utah.

In one lab, students learn how to configure solar panels to generate the most power. (Another lab challenges them to see who can build the best wind generator.) There’s also a program where students patrol the building to monitor and report on energy usage. Johnson Controls is supplying software that links all the solar schools in Utah, allowing students to compare their school’s performance with that of others.

A typical installation consists of a 5.3-kW solar PV module, which can provide enough electricity to power the computer lab and a few classrooms or a library, Rangel says. That may not sound like much, but don’t tell that to teacher Laura Wheeler. “Even if we’re just lighting a library with solar, that’s a big deal to our school,” she says. “We’re in a very small, rural school district, so every penny we save goes a long way.”

CALIFORNIA RAMPS UP SOLAR IN SCHOOLS

With the California Solar Initiative, a statewide solar rebate program, California’s public sector is forecasted to save $2.5 billion from solar installations over the 30-year life of the systems. Educational institutions are expected to save approximately $1.5 billion of the total, according to SunPower Corp., a solar provider based in San Jose, Calif. The California School Boards Association recently announced Solar Schools, a program that supports school districts in developing efficient solar projects. Districts borrow ARRA funds and the federal government subsidizes the interest rate, meaning that loans are repaid at an average rate of 1.5%.

Interest in solar for schools has been accelerating due to a growing emphasis on energy conservation. “Currently, we have installations planned or under way in more than 90 schools,” says Bill Kelly, SunPower’s managing director. “It’s keeping us busy along with local electricians, steel fabricators, and erectors, so we’re also stimulating the local economy.”

The SunPower systems range from 100 kW to 1,000 kW. “The larger systems are for high schools,” Kelly says. “On average, in the schools we’re working with, 75-80% of the electric bill is offset or reduced by solar.”

Most solar panels are designed for parking lots rather than rooftops, he says. The panels form a canopy over the cars, with the secondary benefit of providing shade during hot weather.

As in Utah, California’s school districts want to not only invest in solar but also bring information about the technology into the classroom.

“Many of the school districts have engineering academies, and we’re working with them to develop a renewable energy curriculum,” says Kelly.

Recently, 16 high school students from the San Ramon Valley Unified School District completed a two-week course sponsored by SunPower.

“They learned everything about solar that you could cram into two weeks,” says SunPower’s Madeleine Maguire. “The idea is to create solar ambassadors so that they can teach their peers about this technology.”  

CHECKING SOLAR’S AFFORDABILITY

With solar, first cost is still the issue for property owners and their Building Teams. The price of PV panels has fallen in the last two years due to greater efficiencies in manufacturing and technology, as well as increased competition among a growing number of suppliers.

According to the market intelligence firm IHS iSuppli, in 2009 the cost per watt for a PV solar panel was nearly $2.50. By 2015, that cost is expected to drop to as low as $1, or roughly $200 per panel. Installation prices, too, are expected to decrease about 10% a year—from $5 per watt to around $3 per watt by 2015, according to IHS. The worldwide PV market is poised to double by 2015, with the U.S. market growing steadily.

SunPower’s Kelly agrees that first cost is a constraint: “Even though solar has great economics for the long term, building owners need to watch their budgets.” Still, he urges Building Teams not to miss out on rebates by waiting for prices to go down. “In California, at least, the sooner you install it the bigger the incentive you get,” he says. 

SIDEBAR: Science School Raises the Green Bar

The Walking Mountains Science Center in Avon, Colo., is on target to be certified LEED Platinum, but that wasn’t the Building Team’s primary goal. “We didn’t want to just talk the talk,” says Barry Monroe, LEED AP, project manager for local builder R.A. Nelson and Associates. “We wanted to do everything we could to make the building as green and as energy efficient as possible.” The facility will act as an experiential learning center for adults and children, as well as a model of sustainability.

Designed by Avon-based architects Zehren & Associates, the building produces 42% of its own electricity on site. PV solar panels on two south-facing roofs create energy, and a heat capture system harvests excess heat from the electrical equipment room and transfers it to domestic hot water. The sun also generates heat for the radiant in-floor system.

“Sun shades are part of the solar component and work in conjunction with daylighting to reduce heat gain inside the building,” Monroe says. The building is not air conditioned.

Students will monitor the building’s energy and water usage via a computerized dashboard. The solar system is expected to save about $6,000 a year in energy costs. 

Related Stories

Student Housing | Apr 12, 2024

Construction begins on Auburn University’s new first-year residence hall

The new first-year residence hall along Auburn University's Haley Concourse.

K-12 Schools | Apr 11, 2024

Eric Dinges named CEO of PBK

Eric Dinges named CEO of PBK Architects, Houston.

Construction Costs | Apr 11, 2024

Construction materials prices increase 0.4% in March 2024

Construction input prices increased 0.4% in March compared to the previous month, according to an Associated Builders and Contractors analysis of the U.S. Bureau of Labor Statistics’ Producer Price Index data released today. Nonresidential construction input prices also increased 0.4% for the month.

Healthcare Facilities | Apr 11, 2024

The just cause in behavioral health design: Make it right

NAC Architecture shares strategies for approaching behavioral health design collaboratively and thoughtfully, rather than simply applying a set of blanket rules.

K-12 Schools | Apr 10, 2024

A San Antonio school will provide early childhood education to a traditionally under-resourced region

In San Antonio, Pre-K 4 SA, which provides preschool for 3- and 4-year-olds, and HOLT Group, which owns industrial and other companies, recently broke ground on an early childhood education: the South Education Center.

University Buildings | Apr 10, 2024

Columbia University to begin construction on New York City’s first all-electric academic research building

Columbia University will soon begin construction on New York City’s first all-electric academic research building. Designed by Kohn Pedersen Fox (KPF), the 80,700-sf building for the university’s Vagelos College of Physicians and Surgeons will provide eight floors of biomedical research and lab facilities as well as symposium and community engagement spaces. 

K-12 Schools | Apr 10, 2024

Surprise, surprise: Students excel in modernized K-12 school buildings

Too many of the nation’s school districts are having to make it work with less-than-ideal educational facilities. But at what cost to student performance and staff satisfaction? 

Industrial Facilities | Apr 9, 2024

Confessions of a cold storage architect

Designing energy-efficient cold storage facilities that keep food safe and look beautiful takes special knowledge.

Cultural Facilities | Apr 8, 2024

Multipurpose sports facility will be first completed building at Obama Presidential Center

When it opens in late 2025, the Home Court will be the first completed space on the Obama Presidential Center campus in Chicago. Located on the southwest corner of the 19.3-acre Obama Presidential Center in Jackson Park, the Home Court will be the largest gathering space on the campus. Renderings recently have been released of the 45,000-sf multipurpose sports facility and events space designed by Moody Nolan.

Green | Apr 8, 2024

LEED v5 released for public comment

The U.S. Green Building Council (USGBC) has opened the first public comment period for the first draft of LEED v5. The new version of the LEED green building rating system will drive deep decarbonization, quality of life improvements, and ecological conservation and restoration, USGBC says. 

boombox1 - default
boombox2 -
native1 -

More In Category


AEC Tech

Lack of organizational readiness is biggest hurdle to artificial intelligence adoption

Managers of companies in the industrial sector, including construction, have bought the hype of artificial intelligence (AI) as a transformative technology, but their organizations are not ready to realize its promise, according to research from IFS, a global cloud enterprise software company. An IFS survey of 1,700 senior decision-makers found that 84% of executives anticipate massive organizational benefits from AI. 


Codes and Standards

Updated document details methods of testing fenestration for exterior walls

The Fenestration and Glazing Industry Alliance (FGIA) updated a document serving a recommended practice for determining test methodology for laboratory and field testing of exterior wall systems. The document pertains to products covered by an AAMA standard such as curtain walls, storefronts, window walls, and sloped glazing. AAMA 501-24, Methods of Test for Exterior Walls was last updated in 2015. 


MFPRO+ News

World’s largest 3D printer could create entire neighborhoods

The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.

halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021