flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

Perkins and Will, Healthy Building Network advise against the use of antimicrobial building products

Coronavirus

Perkins and Will, Healthy Building Network advise against the use of antimicrobial building products

Even during a pandemic, antimicrobial  building products may do more harm than good.


By David Malone, Associate Editor | June 2, 2020
Antimicrobial building products graphic

Courtesy Perkins and Will

According to Perkins and Will and the nonprofit Healthy Building Network, building products with antimicrobial treatments are not proved to be a safe or effective means of controlling the spread of COVID-19.

The two organizations issued a statement reaffirming the conclusion of their March 2017 white paper on antimicrobial building products: Antimicrobial additives have not been proven to have the health benefits they promote, and alternatives should be sought wherever possible. No scientific evidence exists that demonstrates any health benefits from antimicrobial additives in building products and materials. “There is no evidence that the addition of antimicrobials to building products lowers the rate of infection or that they lead to a healthier population,” said Teresa McGrath, HBN Chief Research Officer and Toxicologist. These products include textile, furnishings, flooring, tiles, and other surfaces and interior finishes.

It is quite the contrary, in fact, as evidence suggests that with repeated human exposure, antimicrobials can inadvertently contribute to the formation of “super bugs” that are resistant to medical treatment. Antimicrobial additives have also been shown to leach out of materials during use and enter drains and water treatment facilities. Some antimicrobials, such as nano silver, are considered toxic to humans and entire aquatic ecosystems. Another issue with antimicrobial products is that they can create a false sense of security, which may lead to a reduced role of proper cleaning and less-diligent facility maintenance.

Related Stories

Coronavirus | Apr 5, 2020

King County, Wash., addresses homelessness and COVID-19 with rapid-response site conversions

The county is adding 2,500 beds within a dozen Assessment & Recovery Centers that DLR Group helped to design.

Coronavirus | Apr 4, 2020

COVID-19: Construction completed on first phase of Chicago's McCormick Place into Alternate Care Facility

Walsh Construction, one of the largest contractors in the city of Chicago and in the United States, is leading the temporary conversion of a portion of the McCormick Place Convention Center into an Alternate Care Facility (ACF) for novel coronavirus patients. Construction on the first 500 beds was completed on April 3. 

Coronavirus | Apr 4, 2020

COVID-19: Architecture firms churn out protective face shields using their 3D printers

Architecture firms from coast to coast have suddenly turned into manufacturing centers for the production of protective face shields and face masks for use by healthcare workers fighting the COVID-10 pandemic.

Coronavirus | Apr 3, 2020

Cities will survive the pandemic

Density may make it easier for the virus to spread, but let’s not forget that cities are in many ways the heart of society, and a springboard of big ideas, inventions, art, and culture.

Coronavirus | Apr 3, 2020

Kogniz Health launches AI-based fever detection cameras for crowds to help limit coronavirus spread

System continuously scans crowds for fever as they enter facilities to locate and isolate risks.

Coronavirus | Apr 3, 2020

27% of construction firms report layoffs amid COVID-19 outbreak, says AGC

The fast-worsening COVID-19 pandemic has triggered layoffs at more than a quarter of construction firms responding to an online survey released today by the Associated General Contractors of America. The finding, based on responses from earlier this week, contrasts with the government’s monthly employment report for March, which found that construction employment declined by 29,000 as of mid-March.

Coronavirus | Apr 3, 2020

Test facility in a box: Modular, walk-in booth design for coronavirus testing

To address the need for testing in urban areas for those without vehicles, CannonDesign architect Albert Rhee created a walk-in testing booth that is slated for public use.

Coronavirus | Apr 3, 2020

Survey of U.S. code officials shows trends in code compliance during COVID-19

The results of the survey tell us how jurisdictions throughout the U.S. are keeping up with inspections, new building permits and new construction.

Coronavirus | Apr 3, 2020

CallisonRTKL buoyed by overseas demand

Customer service across the globe remains No. 1 priority, says new CFO.

Coronavirus | Apr 2, 2020

COVID-19: HMC Architects using 3D Printers to make face shields for healthcare workers

HMC staff is producing 3D-printed parts from their homes as they self-isolate.

boombox1 - default
boombox2 -
native1 -

More In Category

MFPRO+ Special Reports

Top 10 trends in affordable housing

Among affordable housing developers today, there’s one commonality tying projects together: uncertainty. AEC firms share their latest insights and philosophies on the future of affordable housing in BD+C's 2023 Multifamily Annual Report.




halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021