flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

Niles Bolton Associates promotes Jeffrey Smith, AIA, to President and C. Cannon Reynolds, AIA, to Managing Director

Architects

Niles Bolton Associates promotes Jeffrey Smith, AIA, to President and C. Cannon Reynolds, AIA, to Managing Director

Smith and Reynolds share decades of preparation and a deep commitment to maintaining the client-driven service model that built Niles Bolton Associates’ reputation over the past 48 years.


By Niles Bolton Associates | July 5, 2023
Niles Bolton Associates promotes Jeffrey Smith, AIA, to President and C. Cannon Reynolds, AIA, to Managing Director
Photo courtesy Niles Bolton Associates

Niles Bolton Associates (NBA), a leading architecture, planning and design firm, announces leadership changes as a part of its ongoing commitment to future growth. Current Executive Vice President, Jeffrey Smith, AIA, has been named President and C. Cannon Reynolds, AIA, has been named Managing Director effective June 30, 2023. Smith and Reynolds share decades of preparation and a deep commitment to maintaining the client-driven service model that built Niles Bolton Associates’ reputation over the past 48 years.

Smith, an architect and graduate of the University of Notre Dame, has been at the firm for over 30 years and brings with him a wealth of expertise in architectural design and project management. Smith has served on the Board of Directors since 2017. Reynolds is an architect and graduate from the Georgia Institute of Technology who has been with the company since 2000. Reynolds was named Managing Director of NBA’s Atlanta architecture group in 2015 and has served on the Board of Directors since 2013.

Current President, Ray Kimsey, AIA, will assume the role of President Emeritus and continue to provide guidance and serve as an ambassador for the firm. Kimsey, a Yale University graduate, has played a pivotal role in the company’s success, contributing substantial industry knowledge and forging strong relationships with clients and industry partners. 

Founder, G. Niles Bolton, AIA, will remain as Chairman of the Board. Bolton has been at the helm of Niles Bolton Associates since its inception in 1975, guiding the firm and establishing NBA as a prominent player in the architectural profession. As Chairman of the Board, Niles will continue to provide strategic direction, offer invaluable insights, and act as a mentor to the executive team. 

"We are thrilled to announce these leadership changes at NBA," said Chairman Niles Bolton. "Jeff Smith's proven track record and passion for design make him the ideal choice to lead the company into the future. I have full confidence in his ability to drive innovation, strengthen our client relationships, and continue our legacy of excellence. Ray Kimsey's transition to President Emeritus is a testament to his contributions and dedication over the years, and we are grateful for his continued support and guidance. I am excited to work alongside Jeff, Cannon, and the entire executive team as we embark on this new chapter for our firm."

Niles Bolton Associates is committed to maintaining the highest standards of design quality, client service, and industry leadership. With these management changes, the company is poised to leverage its rich heritage and capitalize on emerging opportunities, reinforcing its position as a trusted partner for architecture, design, and planning solutions.

About Niles Bolton Associates
Niles Bolton Associates is a 150-person firm providing architecture, interior design, landscape architecture, and planning services. Founded in 1975, the firm has completed projects in 49 states and 16 countries and is currently the nation’s 46th leading architectural firm, and No. 1 for student housing, as ranked by Building Design+Construction magazine.

Related Stories

Retail Centers | May 3, 2024

Outside Las Vegas, two unused office buildings will be turned into an open-air retail development

In Henderson, Nev., a city roughly 15 miles southeast of Las Vegas, 100,000 sf of unused office space will be turned into an open-air retail development called The Cliff. The $30 million adaptive reuse development will convert the site’s two office buildings into a destination for retail stores, chef-driven restaurants, and community entertainment.

Codes and Standards | May 3, 2024

New York City considering bill to prevent building collapses

The New York City Council is considering a proposed law with the goal of preventing building collapses. The Billingsley Structural Integrity Act is a response to the collapse of 1915 Billingsley Terrace in the Bronx last December. 

Architects | May 2, 2024

Emerging considerations in inclusive design

Design elements that consider a diverse population of users make lives better. When it comes to wayfinding, some factors will remain consistent—including accessibility and legibility.

K-12 Schools | Apr 30, 2024

Fully electric Oregon elementary school aims for resilience with microgrid design

The River Grove Elementary School in Oregon was designed for net-zero carbon and resiliency to seismic events, storms, and wildfire. The roughly 82,000-sf school in a Portland suburb will feature a microgrid—a small-scale power grid that operates independently from the area’s electric grid. 

AEC Tech | Apr 30, 2024

Lack of organizational readiness is biggest hurdle to artificial intelligence adoption

Managers of companies in the industrial sector, including construction, have bought the hype of artificial intelligence (AI) as a transformative technology, but their organizations are not ready to realize its promise, according to research from IFS, a global cloud enterprise software company. An IFS survey of 1,700 senior decision-makers found that 84% of executives anticipate massive organizational benefits from AI. 

Codes and Standards | Apr 30, 2024

Updated document details methods of testing fenestration for exterior walls

The Fenestration and Glazing Industry Alliance (FGIA) updated a document serving a recommended practice for determining test methodology for laboratory and field testing of exterior wall systems. The document pertains to products covered by an AAMA standard such as curtain walls, storefronts, window walls, and sloped glazing. AAMA 501-24, Methods of Test for Exterior Walls was last updated in 2015. 

MFPRO+ News | Apr 29, 2024

World’s largest 3D printer could create entire neighborhoods

The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.

K-12 Schools | Apr 29, 2024

Tomorrow's classrooms: Designing schools for the digital age

In a world where technology’s rapid pace has reshaped how we live, work, and communicate, it should be no surprise that it’s also changing the PreK-12 education landscape.

Adaptive Reuse | Apr 29, 2024

6 characteristics of a successful adaptive reuse conversion

In the continuous battle against housing shortages and the surplus of vacant buildings, developers are turning their attention to the viability of adaptive reuse for their properties.

AEC Innovators | Apr 26, 2024

National Institute of Building Sciences announces Building Innovation 2024 schedule

The National Institute of Building Sciences is hosting its annual Building Innovation conference, May 22-24 at the Capital Hilton in Washington, D.C. BI2024 brings together everyone who impacts the built environment: government agencies, contractors, the private sector, architects, scientists, and more. 

boombox1 - default
boombox2 -
native1 -

More In Category




halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021