flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

More designers focusing on acoustic properties of buildings

Codes and Standards

More designers focusing on acoustic properties of buildings

Recognition that structures should be acoustically satisfying.


By Peter Fabris, Contributing Editor | August 8, 2019
More designers focusing on acoustic properties of buildings, wellness design

Courtesy Pixabay 

A growing number of designers are paying close attention to the acoustic properties of buildings, according to a BBC Future report.

With studies indicating that noisy work and home settings are linked to depression, anxiety, and reduced performance, architects are recognizing that buildings not only need to be functional and aesthetically pleasing, but also acoustically satisfying.

Up to now, mainstream architecture typically focused on a building’s acoustic properties only in the construction of concert halls and performance spaces.

New virtual reality systems using acoustic modeling software enable architects to listen to how the spaces they design might sound like through aural simulations of structures. One researcher is studying spaces with exemplary acoustic qualities to create an algorithm or a computational routine that architects can use when designing buildings.

It may be possible for structures to cancel out noise by exploiting the physics of sound interference. A sound wave at the right frequency and wavelength can counteract the sound waves of unwanted noises.

Related Stories

| Nov 26, 2012

Changes in development and building standards needed for health of Potomac River

The Potomac River’s health stands to suffer if the region does not change its development and building standards, according to the Potomac Conservancy.

| Nov 16, 2012

South Dakota prefers LEED over building code on state projects

“(LEED is) much better than a mandatory building code because you get a little wiggle room in these projects,” said Mike Mueller, a spokesman for the South Dakota Bureau of Administration.

| Nov 16, 2012

AAMA publishes quality assurance guidelines for Polyamide Thermal Barriers

The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.

| Nov 16, 2012

New ANSI/BIFMA standards developed for educational seating

The American National Standards Institute (ANSI) has approved the newly developed safety and performance standard for educational seating: ANSI/BIFMA X6.1-2012—the first of its kind.

| Nov 16, 2012

Green building councils in 62 countries expect 60% of their work to be green by 2015

More than half of the respondents to a survey of members of the Green Building Council in 62 countries expect green projects to comprise 60% of their work by 2015.

| Nov 16, 2012

Voters approve fewer construction ballot measures in 2012 than in 2008

Voters passed fewer ballot measures related to construction projects this year than they did in 2008, according to an analysis by the Associated General Contractors of America.

boombox1 - default
boombox2 -
native1 -

More In Category




halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021