flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

Modest growth predicted for engineering, construction mergers

Modest growth predicted for engineering, construction mergers

Small and mid-market deals and construction materials drive activity; U.S. is the most active individual nation.


By Posted by Julie S. Higginbotham, Senior Editor | February 8, 2013
Mergers and acquisitions in the construction industry picked up steam in late 20
Mergers and acquisitions in the construction industry picked up steam in late 2012.

 

Though overall 2012 merger and acquisition (M&A) activity in the engineering and construction industry did not meet levels seen in 2011, an uptick in fourth quarter activity points to signs of recovery, according to Engineering Growth, a quarterly analysis of the global engineering and construction industry by consultant PwC US.

“With the continued elevated level of uncertainty through the end of the year, we saw many deal makers staying on the sidelines or engaging in smaller, bolt-on acquisitions. However, as the global engineering and construction sector continues on its path of slow recovery, we remain cautiously optimistic and expect the M&A arena to follow a similar trajectory of modest growth in 2013. Growing infrastructure needs, expanding urbanization, and the need for cleaner, environmentally friendly and sustainable energy and water continue to be the driving forces of M&A activity in the sector,” said H. Kent Goetjen, U.S. engineering and construction leader with PwC.

In 2012, there were 168 deals (with values of $50 million or more) totaling $49.3 billion, compared with 181 transactions worth $73.3 billion in 2011. Overall 2012 M&A volume and value declined compared with 2011 levels, but the sector did see increased activity in the fourth quarter of 2012: 57 deals totaling $13.9 billion, an increase in value and volume compared with the third quarter of 2012 (31 transactions totaling $10.8 billion). 

Despite the slowdown in engineering and construction dealmaking, financial investors continue to slowly gain momentum. In 2012, the participation of financial advisors was higher than the average 10-year rate of about 33 percent of financial acquirers and they were an active participant in some of the largest deals during the year, potentially suggesting signs of recovery and opportunity in the sector. 

Transactions in the construction materials category led deals in the full year of 2012 in both value and volume with 46 deals over $50 million totaling $16.57 billion, outnumbering the construction segment, the usual leader and second in terms of volume in 2012. Multiple large and mega deals throughout 2012, including the only mega-deal in the fourth quarter, involved targets associated with the construction materials segment (notably, cement and concrete), contributing to a 70% increase in value in the segment’s deals over 2011.

The majority of engineering and construction transactions in 2012 were local deals, for both U.S. targets and targets and acquirers from other parts of the world. Asia and Oceania remained the most active region in engineering and construction dealmaking, representing 68 deals totaling $15.09 billion in 2012, followed by Europe and North America. The United States was the most active individual nation, engaging in the largest number of deals and also tending to generate higher deal values due to the relative maturity, size, and financial stability of U.S.-affiliated dealmakers. 

For a copy of Engineering Growth, visit: www.pwc.com/us/industrialproducts

Related Stories

| Aug 11, 2010

Citizenship building in Texas targets LEED Silver

The Department of Homeland Security's new U.S. Citizenship and Immigration Services facility in Irving, Texas, was designed by 4240 Architecture and developed by JDL Castle Corporation. The focal point of the two-story, 56,000-sf building is the double-height, glass-walled Ceremony Room where new citizens take the oath.

| Aug 11, 2010

Carpenters' union helping build its own headquarters

The New England Regional Council of Carpenters headquarters in Dorchester, Mass., is taking shape within a 1940s industrial building. The Building Team of ADD Inc., RDK Engineers, Suffolk Construction, and the carpenters' Joint Apprenticeship Training Committee, is giving the old facility a modern makeover by converting the existing two-story structure into a three-story, 75,000-sf, LEED-certif...

| Aug 11, 2010

Wisconsin becomes the first state to require BIM on public projects

As of July 1, the Wisconsin Division of State Facilities will require all state projects with a total budget of $5 million or more and all new construction with a budget of $2.5 million or more to have their designs begin with a Building Information Model. The new guidelines and standards require A/E services in a design-bid-build project delivery format to use BIM and 3D software from initial ...

| Aug 11, 2010

News Briefs: GBCI begins testing for new LEED professional credentials... Architects rank durability over 'green' in product attributes... ABI falls slightly in April, but shows market improvement

News Briefs: GBCI begins testing for new LEED professional credentials... Architects rank durability over 'green' in product attributes... ABI falls slightly in April, but shows market improvement

| Aug 11, 2010

University of Florida's traditionally modern graduate building

The University of Florida's Hough Hall Graduate Studies Building was designed by Rowe Architects, Tampa, and Sasaki Associates, Boston, to blend with the school's traditional collegiate gothic architecture outside, but reflect a 21st-century education facility inside. Tallahassee-based Ajax Building Corporation is constructing the $19 million facility, which will have traditional exterior detai...

| Aug 11, 2010

Florida International University's cantilevered design

Suffolk Construction's Miami-Dade business unit is serving as GC for the $14 million School of International and Public Affairs building at the University Park Campus of Florida International University. Designed by Arquitectonica, Miami, the five-story, 58,408-sf building will have a café and three auditoriums on the ground level; the largest auditorium will have a 40-foot cantilever abov...

| Aug 11, 2010

Restoration gives new life to New Formalism icon

The $30 million upgrade, restoration, and expansion of the Mark Taper Forum in Los Angeles was completed by the team of Rios Clementi Hale Studios (architect), Harley Ellis Devereaux (executive architect/MEP), KPFF (structural engineer), and Taisei Construction (GC). Work on the Welton Becket-designed 1967 complex included an overhaul of the auditorium, lighting, and acoustics.

| Aug 11, 2010

Best AEC Firms to Work For

2006 FreemanWhite Hnedak Bobo Group McCarthy Building Companies, Inc. Shawmut Design and Construction Walter P Moore 2007 Anshen+Allen Arup Bovis Lend Lease Cannon Design Jones Lang LaSalle Perkins+Will SmithGroup SSOE, Inc. Timothy Haahs & Associates, Inc. 2008 Gilbane Building Co. HDR KJWW Engineering Consultants Lord, Aeck & Sargent Mark G.

| Aug 11, 2010

Great Solutions: Business Management

22. Commercial Properties Repositioned for University USE Tocci Building Companies is finding success in repositioning commercial properties for university use, and it expects the trend to continue. The firm's Capital Cove project in Providence, R.I., for instance, was originally designed by Elkus Manfredi (with design continued by HDS Architects) to be a mixed-use complex with private, market-...

boombox1 - default
boombox2 -
native1 -

More In Category



AEC Tech

Lack of organizational readiness is biggest hurdle to artificial intelligence adoption

Managers of companies in the industrial sector, including construction, have bought the hype of artificial intelligence (AI) as a transformative technology, but their organizations are not ready to realize its promise, according to research from IFS, a global cloud enterprise software company. An IFS survey of 1,700 senior decision-makers found that 84% of executives anticipate massive organizational benefits from AI. 


Codes and Standards

Updated document details methods of testing fenestration for exterior walls

The Fenestration and Glazing Industry Alliance (FGIA) updated a document serving a recommended practice for determining test methodology for laboratory and field testing of exterior wall systems. The document pertains to products covered by an AAMA standard such as curtain walls, storefronts, window walls, and sloped glazing. AAMA 501-24, Methods of Test for Exterior Walls was last updated in 2015. 

halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021