flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

Fall hazards, hazard communication lead 2016 OSHA top violations

Codes and Standards

Fall hazards, hazard communication lead 2016 OSHA top violations

The 2016 list bears a strong resemblance to the 2015 list.


By Peter Fabris, Contributing Editor | October 24, 2016

Pixabay Public Domain

Fall protection and hazard communication were OSHA’s most frequently cited workplace safety violations for fiscal year 2016.

The annual list of violations is nearly identical to OSHA’s 2016 list, indicating similar safety issues persist in the construction industry. 

The Top 10 violations (number of violations cited) for FY 2016 are:

 

1.       Fall Protection, 1926.501 (C) (6,929)

2.       Hazard Communication, 1910.1200 (5,677)

3.       Scaffolds, 1926.451 (C) (3,906)

4.       Respiratory Protection, 1910.134 (3,585)

5.       Lockout/Tagout, 1910.147 (3,414)

6.       Powered Industrial Trucks, 1910.178 (2,860)

7.       Ladders, 1926.1053 (C) (2,639)

8.       Machine Guarding, 1910.212 (2,451)

9.       Electrical Wiring, 1910.305 (1,940)

10.    Electrical, General Requirements, 1910.303 (1,704)

 

This is a preliminary list that will be updated in December.

Related Stories

| May 28, 2013

Fire Chiefs Assn., IBHS call for federal legislation to encourage states to adopt, enforce building codes

The International Association of Fire Chiefs (IAFC) and the Insurance Institute for Business & Home Safety (IBHS) are asking Congress to enact the Safe Building Code Incentive Act (SBCIA), which provides financial incentives for states to adopt and enforce building codes.

| May 28, 2013

Proposal to water down Las Vegas green building code draws criticism

A proposed bill before the Las Vegas City Council would allow any building built before 2009 undergoing a renovation to only have to meet the energy code requirements at the time of initial construction, not the current, stricter guidelines.

| May 28, 2013

Mazria: ‘No need for new power plants to meet growth in buildings sector’

A new analysis of federal data shows that the U.S. buildings sector has made enormous strides in efficiency over the last six years—potentially eliminating the need to build any new power plants to support growth in the sector through 2030.

| May 27, 2013

Support increasing in Ontario to change codes to allow taller wood frame construction

Developers and home builders are asking the Ontario government to change the building code to allow construction of six-story wood frame buildings.

| May 27, 2013

'JUST' label aims to assess social justice on building material manufacturers

At the Living Future's annual conference in May, Jason McLennan, and architecture firm BNIM founder Bob Berkebile launched the JUST label, an extension of the Declare label that addresses social justice and equity issues.

| May 27, 2013

Bipartisan legislation filed to revamp EPA lead rule

Bipartisan legislation has been introduced in the U.S. House of Representatives to reform the Environmental Protection Agency's (EPA) Lead: Renovation, Repair and Painting (LRRP) Rule.

| May 27, 2013

Bill would mandate contractors use subs identified in bids on federal projects

Rep. Carolyn Maloney (D-N.Y.) filed a bill in May that would require prime contractors that bid on federal construction projects over $1 million to list each subcontractor they plan to use for $100,000 or more of work.

| May 27, 2013

Maryland law on codes for wind resistance will take effect in October

The Insurance Institute for Business & Home Safety says that Maryland citizens will be safer due to legislation passed by the legislature and signed into law by Gov. Martin O’Malley.

| May 23, 2013

AGC Contractors Environmental Conference focuses on compliance issues

The 2013 AGC Contractors Environmental Conference June 13 and 14 in Arlington, Va., will include cost-effective strategies for firms to remain compliant and competitive.

| May 23, 2013

ASTM releases new carbon steel hollow structural sections

ASTM has released a new HSS standard, A1085 - 13 Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS).

boombox1 - default
boombox2 -
native1 -

More In Category




halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021