A distinguished group of specialists has been chosen to help develop the nation’s first community-wide resilience benchmarks related to buildings.
The group consists of subject matter experts who will assist the International Code Council and the Alliance for National & Community Resilience (ANCR) in the effort. The American Institute of Architects and the American Wood Council will support the project.
The Resilient Buildings Committee includes architects, code officials, government experts, and industry professionals from the New York City Department of Buildings, Dow Chemical Company, National Institute of Building Sciences and other organizations. Openings on the water and energy infrastructure committees and sponsorship opportunities are still available.
“We are excited to have a diverse group of experts participating in the creation of the ANCR benchmark system,” said ANCR’s Chairman Maj. General Warren C. Edwards USA (Ret.). “Once complete, this system will provide communities a transparent, practical and commonsense self-assessment to quickly and easily gauge their cross-sector resilience efforts. The devastating storms and fires in California, Florida, Puerto Rico, Texas and the U.S. Virgin Islands over the past year illustrate the importance of this groundbreaking program.”
Related Stories
| Dec 22, 2011
Federal home weatherization program has impacted 6.8 million homes
More than 6.8 million homes have been weatherized using federal, state, utility, and other funds under the American Recovery and Reinvestment Act.
| Dec 22, 2011
Group developing BIM data standards
A collaboration among Georgia Tech’s Digital Building Lab, the Precast Concrete Institute, the American Concrete Institute, and the American Institute of Steel Construction aims to develop global standards for transportation of three-dimensional digital models among fabricator, architecture, engineering, and construction groups.
| Dec 22, 2011
New green code spells out thermal requirement for roof retrofits
The 2012 International Green Construction Code (IgCC) includes a straightforward approach to minimum thermal requirements for roof and wall systems.
| Dec 22, 2011
AGC’s safety conference Jan. 11-13 in San Antonio
The Associated General Contractors of America’s national meeting for safety and health professionals will take place Jan. 11-13, 2012 in San Antonio, TX.
| Dec 22, 2011
Proposed New York City zoning revamp encourages rooftop solar and wind energy
New zoning regulation proposals to make it easier for building owners in New York City to make their structures more sustainable have entered the public approval process.
| Dec 15, 2011
Dayton, Ohio schools saving $2.6 million annually by building to LEED
On average, green schools save about $100,000 a year on operating costs, including energy and water savings.
| Dec 15, 2011
Building to LEED standards can pose new risks for construction workers
Workers on these projects suffer a 24% increase in falls to lower levels during roof work, which researchers attributed to the installation of solar panels, and a few other risks.
| Dec 15, 2011
NRDC charges Maine governor with weakening green wood requirement
The FSC program is administered through the Leadership in Energy and Environmental Design (LEED) and requires wood to be harvested in a sustainable way.
| Dec 15, 2011
Post-tornado, Tuscaloosa seeks to create walkable urban, retail areas
Block sizes initially were limited to a maximum perimeter of 1,750 feet, with no side of the block being longer than 500 feet.
| Dec 15, 2011
Allentown, Pa. city council asked to repeal union-friendly law
The mayor of Allentown, Pa. asked the City Council to repeal a year-old ordinance that forces contractors to hire union workers for large city projects funded with state and federal dollars.