The Cheyenne, Wyoming City Council voted down a measure that would have implemented design standards for new construction and building additions downtown.
The goal was to help jumpstart the revival of the state capital’s central business district. Detractors said this move could backfire and dampen downtown development. The standards would regulate how far buildings must be set back from the street, what construction materials could be used, and how open spaces are included in the projects. There are currently no building design standards for the city’s downtown. It is the only zoned district in the city without that type of regulation.
One critic told the Wyoming News that downtown is a perfect place to allow architects and developers to experiment with different styles and building materials rather than forcing them to match the character of surrounding buildings.
A local architect and downtown property owner said guidelines can help to raise the quality of designs, but added that it would be a good idea to include a flexible appeals or exemption process for developers who want to build quality projects with "innovative and modern designs" that might not meet all the design regulations.
(http://www.wyomingnews.com/articles/2014/11/25/news/01top_11-25-14.txt#.VHXlUjTF_ng)
(http://www.wyomingnews.com/articles/2014/11/19/news/19local_11-19-14.txt#.VG30yDTF_ng)
Related Stories
| Dec 22, 2011
Federal home weatherization program has impacted 6.8 million homes
More than 6.8 million homes have been weatherized using federal, state, utility, and other funds under the American Recovery and Reinvestment Act.
| Dec 22, 2011
Group developing BIM data standards
A collaboration among Georgia Tech’s Digital Building Lab, the Precast Concrete Institute, the American Concrete Institute, and the American Institute of Steel Construction aims to develop global standards for transportation of three-dimensional digital models among fabricator, architecture, engineering, and construction groups.
| Dec 22, 2011
New green code spells out thermal requirement for roof retrofits
The 2012 International Green Construction Code (IgCC) includes a straightforward approach to minimum thermal requirements for roof and wall systems.
| Dec 22, 2011
AGC’s safety conference Jan. 11-13 in San Antonio
The Associated General Contractors of America’s national meeting for safety and health professionals will take place Jan. 11-13, 2012 in San Antonio, TX.
| Dec 22, 2011
Proposed New York City zoning revamp encourages rooftop solar and wind energy
New zoning regulation proposals to make it easier for building owners in New York City to make their structures more sustainable have entered the public approval process.
| Dec 15, 2011
Dayton, Ohio schools saving $2.6 million annually by building to LEED
On average, green schools save about $100,000 a year on operating costs, including energy and water savings.
| Dec 15, 2011
Building to LEED standards can pose new risks for construction workers
Workers on these projects suffer a 24% increase in falls to lower levels during roof work, which researchers attributed to the installation of solar panels, and a few other risks.
| Dec 15, 2011
NRDC charges Maine governor with weakening green wood requirement
The FSC program is administered through the Leadership in Energy and Environmental Design (LEED) and requires wood to be harvested in a sustainable way.
| Dec 15, 2011
Post-tornado, Tuscaloosa seeks to create walkable urban, retail areas
Block sizes initially were limited to a maximum perimeter of 1,750 feet, with no side of the block being longer than 500 feet.
| Dec 15, 2011
Allentown, Pa. city council asked to repeal union-friendly law
The mayor of Allentown, Pa. asked the City Council to repeal a year-old ordinance that forces contractors to hire union workers for large city projects funded with state and federal dollars.
