flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

AGC pushes for more environmentally friendly construction

Codes and Standards

AGC pushes for more environmentally friendly construction

Contractor trade group supports government investment, tax incentives to reduce carbon footprints.


By Peter Fabris, Contributing Editor | August 12, 2021

The Associated General Contractors of America (AGC) recently released a report to spur more environmentally friendly construction.

The AGC supports wide-ranging government investment and tax incentives to modernize public infrastructure, renovate federal buildings, and build new ones that conserve raw materials, reduce waste, and use less energy and water. AGC also supports expedited permitting for projects that will improve efficiency and reduce greenhouse gas emissions.

AGC wants clients and architects to include contractors earlier in project development to address sustainable materials, recycling, and other environmental factors. The association also advocates increasing education and awareness on lifecycle and total ownership costs versus up-front, one-time costs to promote designs that will save more energy and water over time.

Increased training of construction workers would have multiple environmental benefits, AGC adds, and government could support this activity. Programs such as employer-neutral job training on technologies to support a decarbonized economy and in related fields such as environmental remediation or weatherization would advance environmental goals.

Related Stories

| May 24, 2012

2012 Reconstruction Awards Entry Form

Download a PDF of the Entry Form at the bottom of this page.

| May 17, 2012

New standard for Structural Insulated Panels under development

ASTM International and NTA, Inc. are developing a new standard for Structural Insulated Panels (SIPs) that would create a path for U.S. manufacturers to meet the requirements of the Canadian building code.

| May 17, 2012

Webinar: ‘What Energy Codes and Standards Are Adopted Where and by Whom’

A June 12 webinar by the Construction Specifications Institute will outline what energy codes and standards have been adopted in each of the states for commercial buildings, and what is anticipated to be adopted in the future.

| May 17, 2012

California Governor orders new green standards on state buildings

California Gov. Jerry Brown issued an executive order recently that calls for all new or renovated state buildings of more than 10,000 sf to achieve LEED Silver or higher and incorporate clean, onsite power generation.

| May 17, 2012

New Zealand stadium roof collapse blamed on snow, construction defects

Heavy snowfall, construction defects, and design problems contributed to the collapse of the Stadium Southland roof in New Zealand in September 2010, a report has found.

| May 17, 2012

OSHA launches fall prevention campaign

The Occupational Safety and Health Administration (OSHA) recently launched an educational campaign to prevent deadly falls in the construction industry.

| May 15, 2012

Suffolk selected for Rosenwald Elementary modernization project

The 314-student station elementary school will undergo extensive modernization.

| May 10, 2012

Chapter 6 Energy Codes + Reconstructed Buildings: 2012 and Beyond

Our experts analyze the next generation of energy and green building codes and how they impact reconstruction.

boombox1 - default
boombox2 -
native1 -

More In Category


AEC Tech

Lack of organizational readiness is biggest hurdle to artificial intelligence adoption

Managers of companies in the industrial sector, including construction, have bought the hype of artificial intelligence (AI) as a transformative technology, but their organizations are not ready to realize its promise, according to research from IFS, a global cloud enterprise software company. An IFS survey of 1,700 senior decision-makers found that 84% of executives anticipate massive organizational benefits from AI. 


Codes and Standards

Updated document details methods of testing fenestration for exterior walls

The Fenestration and Glazing Industry Alliance (FGIA) updated a document serving a recommended practice for determining test methodology for laboratory and field testing of exterior wall systems. The document pertains to products covered by an AAMA standard such as curtain walls, storefronts, window walls, and sloped glazing. AAMA 501-24, Methods of Test for Exterior Walls was last updated in 2015. 


MFPRO+ News

World’s largest 3D printer could create entire neighborhoods

The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.

halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021