flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

Metl-Span Stands Tall for Amazon Fulfillment Center

Sponsored Content

Metl-Span Stands Tall for Amazon Fulfillment Center

Insulated Metal Panels Deliver Perfect Configuration, Preferred Performance


By METL-SPAN | August 17, 2020

The Amazon fulfillment center near Spokane, Wash., is one of many centers across the country for the e-commerce giant where products are stored and then shipped to consumers who have made purchases through their online platform. As many as 1,500 employees work alongside robots to confirm orders, get them loaded onto trucks and then send them out the door to their final destination.Ā 

The 750,000-square-foot facility has four floors.

During the planning phases for the massive structure, architects and designers realized they had a large area to cover when it came to the exterior walls.Ā 

Metl-Span insulated metal panels became the preferred solution.

Ā 

From Floor to Ceiling

Ā 

At the outset, architects knew they needed to achieve uniformity in look for the buildingā€™s exterior, a request that came from the building owner.

ā€œ[Amazon] wanted a single product that went from the top of the concrete footing up to the roofline,ā€ said Bill Thordarson, regional manager, Bain Associates, which served as the manufacturerā€™s representative on the project. ā€œThatā€™s about 50 feet.ā€

Contractors installed nearly 10,000 square feet of Metl-Span CF Mesa insulated metal panels. The lightly corrugated profile on both faces of the panel created symmetry on the outside of the building. The panels spanned between 42 and 49 feet in length.Ā 

To create the right design aesthetic, architects chose four different colors for the panels ā€“ Polar White, Sandstone, Zinc Gray and Smoke Gray.

ā€œWith the ability to choose different colors, the building avoids a monochromatic look,ā€ Thordarson added. ā€œIt has some texture and aesthetic quality to it.ā€

The CF Mesa panels are manufactured with an offset double tongue-and-groove system, allowing the panels to slide into each other for ease and efficiency in installation.Ā 

In addition, the panels are only fastened on one side, which allows for a concealed system. Ā 

This versatility added to the visual appeal of the buildingā€™s exterior wall, creating a seamless flow from panel to panel.

Ā 

Ā 

Running Hot and Cold

Ā 

As an insulated metal panel, CF Mesa panels are manufactured with foamed-in-place insulation. The panels deliver optimal thermal performance, another mandate when constructing the Amazon fulfillment center in the kind of climate experienced by Spokane, Wash.Ā 

ā€œIt gets superhot in the summer and supercold in the winter,ā€ Thordarson remarked. ā€œThe beauty of the foam-insulated panels is that youā€™re also achieving a superhigh R value, so you donā€™t have to worry about insulating the inside of the building.ā€

CF Mesa panels are ideal in cold storage applications such ascooler buildings, freezers, food processing buildings, dry goods warehouses, and any structure where temperature control and insulation values are critical.


Economic Driver

Ā 

Opened in June 2020, the Amazon fulfillment center outside Spokane has spurred additional development in the area.

During peak holiday periods, the facility employs as many as 3,000 people.

Ā 

Metl-Span
1720 Lakepointe Drive Suite 101
Lewisville, Texas 75057Ā 
877.585.9969Ā 
www.metlspan.com
info@metlspan.com

Ā 

Tags

Related Stories

| Apr 17, 2014

6 details that can throw off your schedule

In 1997, Apple told us to ā€œThink Different.ā€ So we did. We thought about what could happen if the world went mobile, if information was boundless, if we could carry our office in our back pocket. Weā€™ve grown to love different and to expect change. And when it comes to Apple products, thatā€™s not such a bad thing. When it comes to your building order, however, itā€™s not nearly as appealing.

| Apr 9, 2014

Steel decks: 11 tips for their proper use | BD+C

Building Teams have been using steel decks with proven success for 75 years. Building Design+Construction consulted with technical experts from the Steel Deck Institute and the deck manufacturing industry for their advice on how best to use steel decking.

| Apr 8, 2014

Reflecting on job number 61-001

Job number 61-001 changed everything. It was sold in 1961, a year of change for the nation and for Star. By January, John F. Kennedy would be president. By the end of the year, Star would launch a historic shift in our product and our distribution, a shift still active today.

| Mar 31, 2014

Tips for creating a competitive bid using codes and loads

Landing a project feels like winning a prize, sort of like finding that forgotten $20 bill in the pocket of a pair of jeans you havenā€™t worn in a while. But living on the ā€œchanceā€ of winning a job isnā€™t a great way to pay your electric bill. So, how do you swing the chances in your favor?

| Mar 26, 2014

A sales and service showcase

High Plains Equipment, a Case IH dealership in Devils Lake, N.D., constructs a larger facility to better serve its customers.

| Mar 19, 2014

Frames: the biggest value engineering tip

In every aspect of a metal building, you can tweak the cost by adjusting the finish, panel thickness, and panel profile. These changes might make a few percentage points difference in the cost. Change the framing and you have the opportunity to affect 10-20 percent savings to the metal building portion of the project.

| Mar 11, 2014

Why you should start with a builder, part three

We had worked together for 30 years. As a long-standing client of mine, he and I had gone through many projects together. And we were approaching another project, one that would forever change how he viewed our working relationship. As my customer and I sat down to talk about the project details, he told me something that would stay with me for weeks. ā€œKim, Iā€™m going to have to get other bids on this just so I have peace of mind.ā€

Sponsored | | Mar 10, 2014

A high-performance barn

Bastoni Vineyards replaces a wooden barn with an efficient metal building used for maintenance, storage, and hosting events.

| Mar 4, 2014

CENTRIA Demonstrates Commitment to Contractors

New Brochure Highlights Architectural Metal Panel Manufacturerā€™s Products, Expertise and Experience

| Feb 27, 2014

Colorado Coalition Plans Welcoming Events for METALCON International Visitors

Visitors to the 24th METALCON International, slated for October 1-3 at the Colorado Convention Center in Denver, will get a royal welcome from local companies involved in the show. Denver-based New Tech Machinery and Colorado Springs-based S-5! Solutions have formed the Colorado Coalition as a way of encouraging visitors to learn about Colorado before they arrive and for Coloradans to experience METALCON.

boombox1 - default
boombox2 -
native1 -

More In Category




halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021

Ā