As programs of study in higher education must evolve to better prepare students for their chosen careers, so also must the environments in which they learn. Ontario’s Fleming College, established in the late 1960s, realized the need for a full overhaul of its main campus to stay competitive and to accommodate nearly seventeen thousand full and part-time students.
Commissioned to renovate the Sutherland Campus A-Wing building, the architectural firm Gow Hastings faced the challenge of renovation while students and faculty continued to use the facilities. Modernizing classrooms to provide updated curricula and common areas for comfort in study required a thorough evaluation of the building.
As originally built, the A-Wing lacked color and opportunities for natural lighting to brighten the interior. The previous dark brown cladding on the exterior, while consistent with the college’s environmental surroundings, appeared outdated and moody. One of the first steps in the revitalization involved stripping away the entire envelope down to its steel frames for a retrofit. During the specification of materials, the architects chose ALPOLIC MCM.
Nearly Limitless Design with Endless Finishes and Fabrication Possibilities
Thanks to a solid partnership with Sherwin Williams Coil Coatings, ALPOLIC’s ability to produce any hue onto their metal composite materials presented the Gow Hastings team with the desired colors for this project. Nearly 40,000 square feet of MCM in nine different finishes–including five different whites, two shades of yellow, charcoal, and Mica Anodic Clear–were fabricated and installed.
Rather than retrofit flat panels throughout the envelope as in the original design, Gow Hastings envisioned sections of the building with the MCM installed at different angles to create a visually stunning accordion effect. Panels installed over smaller windows were also perforated to draw natural light into the building, an attractive complement to the addition of floor-to-ceiling windows in the common pavilion areas.
The result presented a cheerful, colorful exterior indicative of the contemporary image Fleming College wished to project. Since its completion in 2020, the A-Wing Building has received several distinctions, among them recognition as a Finalist in the Public Space Design category of the 2021 SBID Awards and a Merit Award in ARCHITECT’s 2023 Architecture and Interiors Award for Adaptive Reuse.
MCM is Ideal for Retrofit Architectural Projects
Often, the decision to retrofit is inspired by a dedication to green building. To bring an older building up to current energy code standards, wrapping the building in continuous insulation and cladding with MCM delivers both energy efficiency and visual appeal. ALPOLIC’s virtually 100% recyclable materials are manufactured with sustainability in mind and come with some of the industry’s best finish warranties.
Retrofitting projects, as opposed to a complete tear-down and rebuild, is not only better for the environment but it can save money in the long run. Redesign with sustainable MCM and the cost savings can add up quickly—less upfront cost, low maintenance costs, less construction time, and the potential for improved energy efficiency. Composite is the ideal choice because of its design flexibility and the variety of colors and finishes.
Cladding existing facades with ALPOLIC MCM injects new life into a project and contributes to its increased energy efficiency and safety. As exemplified by Fleming College’s A Wing, the application of ALPOLIC metal composite materials modernizes a building’s appearance and the reputation of the campus. With infinite colors available, and the best warranty in the industry, ALPOLIC puts on a fresh, lasting face.
For more information on design and specification of MCM in contemporary architecture, schedule an AIA Lunch and Learn session. ALPOLIC presently offers four free accredited AIA/CES Learning Units (HSW).
Company Information:
ALPOLIC Metal Composite Materials
800.422.7270
info@alpolic.com
www.alpolic-americas.com
Related Stories
| Apr 17, 2014
6 details that can throw off your schedule
In 1997, Apple told us to “Think Different.” So we did. We thought about what could happen if the world went mobile, if information was boundless, if we could carry our office in our back pocket. We’ve grown to love different and to expect change. And when it comes to Apple products, that’s not such a bad thing. When it comes to your building order, however, it’s not nearly as appealing.
| Apr 9, 2014
Steel decks: 11 tips for their proper use | BD+C
Building Teams have been using steel decks with proven success for 75 years. Building Design+Construction consulted with technical experts from the Steel Deck Institute and the deck manufacturing industry for their advice on how best to use steel decking.
| Apr 8, 2014
Reflecting on job number 61-001
Job number 61-001 changed everything. It was sold in 1961, a year of change for the nation and for Star. By January, John F. Kennedy would be president. By the end of the year, Star would launch a historic shift in our product and our distribution, a shift still active today.
| Mar 31, 2014
Tips for creating a competitive bid using codes and loads
Landing a project feels like winning a prize, sort of like finding that forgotten $20 bill in the pocket of a pair of jeans you haven’t worn in a while. But living on the “chance” of winning a job isn’t a great way to pay your electric bill. So, how do you swing the chances in your favor?
| Mar 26, 2014
A sales and service showcase
High Plains Equipment, a Case IH dealership in Devils Lake, N.D., constructs a larger facility to better serve its customers.
| Mar 19, 2014
Frames: the biggest value engineering tip
In every aspect of a metal building, you can tweak the cost by adjusting the finish, panel thickness, and panel profile. These changes might make a few percentage points difference in the cost. Change the framing and you have the opportunity to affect 10-20 percent savings to the metal building portion of the project.
| Mar 11, 2014
Why you should start with a builder, part three
We had worked together for 30 years. As a long-standing client of mine, he and I had gone through many projects together. And we were approaching another project, one that would forever change how he viewed our working relationship. As my customer and I sat down to talk about the project details, he told me something that would stay with me for weeks. “Kim, I’m going to have to get other bids on this just so I have peace of mind.”
Sponsored | | Mar 10, 2014
A high-performance barn
Bastoni Vineyards replaces a wooden barn with an efficient metal building used for maintenance, storage, and hosting events.
| Mar 4, 2014
CENTRIA Demonstrates Commitment to Contractors
New Brochure Highlights Architectural Metal Panel Manufacturer’s Products, Expertise and Experience
| Feb 27, 2014
Colorado Coalition Plans Welcoming Events for METALCON International Visitors
Visitors to the 24th METALCON International, slated for October 1-3 at the Colorado Convention Center in Denver, will get a royal welcome from local companies involved in the show. Denver-based New Tech Machinery and Colorado Springs-based S-5! Solutions have formed the Colorado Coalition as a way of encouraging visitors to learn about Colorado before they arrive and for Coloradans to experience METALCON.
