flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

The Tower at PNC Plaza

Sponsored Content Coatings

The Tower at PNC Plaza

In striving to create the greenest office tower in the world, PNC, Gensler and their partners constructed a building that was designed to surpass LEED Platinum certification.


By PPG | April 14, 2017

Photos by Tom Cwenar

Pittsburgh-based corporations PNC Financial Services Group and PPG have played integral roles in the development of sustainable architecture. Given their proximity and history, it’s no surprise that PPG products have figured prominently in many of PNC’s signature buildings, including its boldest yet: The Tower at PNC Plaza.

Designed to be one of the greenest office buildings ever built, the 33-story high-rise looks like a conventional glass-and-steel skyscraper, yet the sleekly polished exterior hides a second glass façade that, along with a rooftop solar chimney, creates a “breathing” building that uses fresh air and solar energy to naturally cool, heat and ventilate itself for much of the year.

 

Metal Curtain Wall

The metal framing for the double-skin façade for The Tower at PNC Plaza is finished with CORAFLON® SUNSTORM® powder coatings by PPG, which were specified for their sparkling mica appearance, hardness and near-zero VOC emissions. “Reducing energy use and emissions, maximizing natural light and optimizing occupant comfort were among the primary goals for The Tower at PNC Plaza, which earned LEED Platinum certification, the highest designation available from the U.S. Green Building Council,” says Patrick Finegan, Group Regional Manager, PNC Realty Services.

To help achieve these objectives, PNC and Gensler worked with the Permasteelisa Group to construct a 1,200-square-foot mock-up of the 800,000-square-foot structure using insulating glass units with argon-gas-filled warm-edge spacers. Thermally broken aluminum framing—finished with Coraflon Sunstorm Mica Gray powder coatings—connected the IGUs to wooden mullions to create added insulation.

During testing and verification, the curtain wall mock-up exceeded design and performance expectations and the design was specified for the entire building.

Based on FEVE resin technology, Coraflon Sunstorm powder coatings deliver exceptional durability and weatherability in a wide range of colors and glosses, including the sparkling mica finish featured on The Tower at PNC Plaza. Like traditional liquid fluoropolymer coatings, Coraflon Sunstorm FEVE powder coatings and DURANAR® PVDF powder coatings feature equivalent performance that meets or exceeds American Architectural Manufacturers Association (AAMA) 2605 specifications for weathering, corrosion resistance, chemical resistance and other criteria on marquee building projects.

In addition to a sophisticated double-skin façade that maximizes ventilation for heating and cooling and increases access to fresh air and natural light, The Tower at PNC Plaza operates highly-efficient water-based heating (radiant) panels and cooling (chilled beam) systems for supplemental heating and cooling.

Not only do these strategies enable The Tower at PNC Plaza to consume up to 50 percent less energy than benchmark buildings of its size, but the high-rise also bathes more than 90 percent of its workspace in natural light.

To learn more about high-performance Coraflon FEVE and Duranar PVDF coatings and how they can enhance building performance and sustainability, call 1-800-258-6398 or visit www.ppgmetalcoatings.com

 

Tags

Related Stories

| May 15, 2014

Paints, coatings, and sealants: 10 new ways to seal the deal

Color-shifting finishes, dry-erase surfaces, and stain-blocking paints are highlighted in this round up of new offerings in paints, coatings, sealants, and finishes. 

| Apr 1, 2014

Paints, coatings and sealants: Choosing products and procedures for best performance

This course covers life cycle assessment, color selection, emissions, durability, resilience, corrosion resistance, specification standards, and other critical aspects of choosing coatings for interior and exterior walls, ceilings, and roofs.

Sponsored | | Mar 21, 2014

Kameleon Color paint creates color-changing, iridescent exterior for Exploration Tower at Port Canaveral

Linetec finishes Firestone’s UNA-CLAD panels, achieving a one-of-a-kind, dynamic appearance with the first use of Valspar’s new Kameleon Color

| Mar 20, 2014

Common EIFS failures, and how to prevent them

Poor workmanship, impact damage, building movement, and incompatible or unsound substrate are among the major culprits of EIFS problems. 

| Mar 4, 2014

How EIFS came to America

Design experts from Hoffmann Architects offer a brief history of exterior insulation and finish systems in the U.S.

| Feb 19, 2014

AIA class: The ABCs of IMPs – How to design and build with insulated metal panels

This AIA/CES class offers insight in areas including policies and codes surrounding insulated metal panels, contributions from LEED and tax credits, energy modeling, and business development opportunities available with IMPs. Take this course and earn 1.0 AIA LU/HSW/SD.

| Jan 7, 2014

Concrete solutions: 9 innovations for a construction essential

BD+C editors offer a roundup of new products and case studies that represent the latest breakthroughs in concrete technology.

| Dec 10, 2013

16 great solutions for architects, engineers, and contractors

From a crowd-funded smart shovel to a why-didn’t-someone-do-this-sooner scheme for managing traffic in public restrooms, these ideas are noteworthy for creative problem-solving. Here are some of the most intriguing innovations the BD+C community has brought to our attention this year.

| May 14, 2013

Paints and coatings: The latest trends in sustainability

When it comes to durability, a 50-year building design ideally should include 50-year coatings. Many building products consume substantial amounts of energy, water, and petrochemicals during manufacture, but they can make up for it in the operations phase. The same should be expected from architectural coatings.

| May 3, 2013

5 common failures in paints and coatings

As experienced designers, contractors, and owners know, most paint and coating problems are correctable, but some are especially stubborn to address. Here is a partial compendium of typical failure modes and methods for addressing the problem.

boombox1 - default
boombox2 -
native1 -

More In Category




halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021