Hy-Vee grocery has established itself as one of the top 25 grocery retailers in the country. The organization has built 240 stores throughout eight midwestern states and employs over 85,000 people. A common thread to the grocery chain’s expansion? Fabcon Precast.
DIFFERENT BUSINESSES. A COMMON APPROACH
As the go-to provider of precast concrete panels for many grocery chains throughout the country, Hy-Vee looks to Fabcon for expertise in both the production of precast panels and the build-out of its stores.
“The biggest thing for grocery – and retail clients in general – is speed of construction,” said Fabcon’s Matt Smith. “They want to get the registers up and running as quickly as possible. The fastest way to do that is with precast.” While speed is always vital, the grocer has grown to appreciate our service throughout the entirety of a project. And much like itself, also the way we’ve proven to help them keep costs in check.
CLIMATE CONSIDERATIONS, INSIDE & OUT
“Like many of the grocers we work with,” said Fabcon’s Don Johnson, “Hy-Vee gravitates to our 12” VersaCore+Green™ sandwich panels and their impressive R-value of 28.2.”
Featuring edge-to-edge insulation, these panels meet energy efficiency requirements and are effective at maintaining a comfortable shopping environment, regardless of climate. This helps to enhance the customer experience, but it also saves plenty of money in heating and cooling throughout the life of a store.
Not all grocery stores are created equal. And Hy-Vee is no exception. So if the in-store experience was so much better than its competitors, why look like everyone else? Fabcon has worked closely with Hy-Vee’s architects and designers to produce a custom finish for their precast panels. This helps the chain’s stores stand out from the pack. And create a positive impression of the brand the moment a customer approaches the store.
Experienced crews and better engineering insure that Fabcon walls go up fast making room for other subcontractors to get to work quicker.
QUICK TO BUILD. QUICKER TO MARKET
“Because of the close working relationships, all parties at the table develop a kind of “short hand” when working with architects, general contractors and management from the grocery chains,” said Johnson. “’It’s just like the one we built in Cedar Rapids,’ for example, that only serves to speed up the process and eliminate pitfalls along the way.”
This means that from the plant to the install crews, many of our employees have direct experience with a Hy-Vee project. And it shows as subsequent builds go that much easier. With multiple production facilities, we’re able to produce the required panels to handle multiple projects at one time.
“On the larger end of things, there are always efficiencies when you repeat a design,” said Smith. “Even if the architect is designing buildings in several states, you’re not starting from scratch each time – both in terms of production and build-out.” This is how Hy-Vee moves so quickly from Ground Breaking to Grand Opening.
Then it’s off to the next store and another call to Fabcon Precast.
Related Stories
3D Printing | May 12, 2023
World’s first 3D-printed medical center completed
3D construction printing reached new heights this week as the world’s first 3D-printed medical center was completed in Thailand.
Concrete Technology | Apr 24, 2023
A housing complex outside Paris is touted as the world’s first fully recycled concrete building
Outside Paris, Holcim, a Swiss-based provider of innovative and sustainable building solutions, and Seqens, a social housing provider in France, are partnering to build Recygénie—a 220-unit housing complex, including 70 social housing units. Holcim is calling the project the world’s first fully recycled concrete building.
Design Innovation Report | Apr 19, 2023
Reinforced concrete walls and fins stiffen and shade the National Bank of Kuwait skyscraper
When the National Bank of Kuwait first conceived its new headquarters more than a decade ago, it wanted to make a statement about passive design with a soaring tower that could withstand the extreme heat of Kuwait City, the country’s desert capital.
3D Printing | Apr 11, 2023
University of Michigan’s DART Laboratory unveils Shell Wall—a concrete wall that’s lightweight and freeform 3D printed
The University of Michigan’s DART Laboratory has unveiled a new product called Shell Wall—which the organization describes as the first lightweight, freeform 3D printed and structurally reinforced concrete wall. The innovative product leverages DART Laboratory’s research and development on the use of 3D-printing technology to build structures that require less concrete.
Concrete | Mar 17, 2023
American Concrete Institute releases new guide for shotcrete construction
The American Concrete Institute, through the work of ACI Committee 506, has released ACI PRC-506-22: Shotcrete—Guide. The newly introduced guide provides information on materials and properties of both dry-mix and wet-mix shotcrete and covers most facets of the shotcrete process including application procedures, equipment requirements, and responsibilities of the shotcrete crew.
Student Housing | Mar 13, 2023
University of Oklahoma, Missouri S&T add storm-safe spaces in student housing buildings for tornado protection
More universities are incorporating reinforced rooms in student housing designs to provide an extra layer of protection for students. Storm shelters have been included in recent KWK Architects-designed university projects in the Great Plains where there is a high incidence of tornadoes. Projects include Headington and Dunham Residential Colleges at the University of Oklahoma and the University Commons residential complex at Missouri S&T.
Concrete | Jan 24, 2023
Researchers investigate ancient Roman concrete to make durable, lower carbon mortar
Researchers have turned to an ancient Roman concrete recipe to develop more durable concrete that lasts for centuries and can potentially reduce the carbon impact of the built environment.
75 Top Building Products | Nov 30, 2022
75 top building products for 2022
Each year, the Building Design+Construction editorial team evaluates the vast universe of new and updated products, materials, and systems for the U.S. building design and construction market. The best-of-the-best products make up our annual 75 Top Products report.
Building Materials | Aug 3, 2022
Shawmut CEO Les Hiscoe on coping with a shaky supply chain in construction
BD+C's John Caulfield interviews Les Hiscoe, CEO of Shawmut Design and Construction, about how his firm keeps projects on schedule and budget in the face of shortages, delays, and price volatility.
Concrete | Jul 26, 2022
Consortium to set standards and create markets for low-carbon concrete
A consortium of construction firms, property developers, and building engineers have pledged to drive down the carbon emissions of concrete.
