When West Sacramento completed its citywide needs assessment, results determined that a multi-generational facility was necessary to support cultural activities, theater productions and educational classes. As architects began planning the facility, they knew the design had to complement the urban cityscape, so they chose to build with coated metal to achieve the bold look they were after.
Architects from Group 4 Architecture, Research + Planning called upon CENTRIA to supply the metal paneling for the exterior, knowing the manufacturer had a wide variety of textures available. CENTRIA then looked to Valspar, one of the largest architectural coating manufacturers, to present options for coating colors and finishes. As such, CENTRIA was able to present numerous options to the design team, who finally settled on a trio of bright blue colors –Valspar’s Fluropon® (known as Flurofinish to CENTRIA customers) in Arabian Blue, Deep Sea Blue and Royal Blue.
CENTRIA supplied more than 7,000 square-feet of its Profile Series Exposed Fastener Style-Rib vertical panels, which were installed by Richard Joseph & Company. The Arabian Blue Fluropon coats a majority of the paneling on the exterior and is accented with the complementing blue Fluropon colors.
Along with keeping sustainability in the forefront of its chemistry, Fluropon architectural coil coating, containing 70 percent PVDF resins, is a durable two-coat system that also offers outstanding color retention and consistency to ensure the building holds its hue. Since its opening in 2011, the West Sacramento Community Center has received numerous awards such as an Excellence in Design Award from Environmental Design + Construction magazine and an Award of Excellence from the California Park & Recreation Society, and also achieved LEED® Gold certification.
Related Stories
| May 15, 2014
Paints, coatings, and sealants: 10 new ways to seal the deal
Color-shifting finishes, dry-erase surfaces, and stain-blocking paints are highlighted in this round up of new offerings in paints, coatings, sealants, and finishes.
| Apr 1, 2014
Paints, coatings and sealants: Choosing products and procedures for best performance
This course covers life cycle assessment, color selection, emissions, durability, resilience, corrosion resistance, specification standards, and other critical aspects of choosing coatings for interior and exterior walls, ceilings, and roofs.
Sponsored | | Mar 21, 2014
Kameleon Color paint creates color-changing, iridescent exterior for Exploration Tower at Port Canaveral
Linetec finishes Firestone’s UNA-CLAD panels, achieving a one-of-a-kind, dynamic appearance with the first use of Valspar’s new Kameleon Color
| Mar 20, 2014
Common EIFS failures, and how to prevent them
Poor workmanship, impact damage, building movement, and incompatible or unsound substrate are among the major culprits of EIFS problems.
| Mar 4, 2014
How EIFS came to America
Design experts from Hoffmann Architects offer a brief history of exterior insulation and finish systems in the U.S.
| Feb 19, 2014
AIA class: The ABCs of IMPs – How to design and build with insulated metal panels
This AIA/CES class offers insight in areas including policies and codes surrounding insulated metal panels, contributions from LEED and tax credits, energy modeling, and business development opportunities available with IMPs. Take this course and earn 1.0 AIA LU/HSW/SD.
| Jan 7, 2014
Concrete solutions: 9 innovations for a construction essential
BD+C editors offer a roundup of new products and case studies that represent the latest breakthroughs in concrete technology.
| Dec 10, 2013
16 great solutions for architects, engineers, and contractors
From a crowd-funded smart shovel to a why-didn’t-someone-do-this-sooner scheme for managing traffic in public restrooms, these ideas are noteworthy for creative problem-solving. Here are some of the most intriguing innovations the BD+C community has brought to our attention this year.
| May 14, 2013
Paints and coatings: The latest trends in sustainability
When it comes to durability, a 50-year building design ideally should include 50-year coatings. Many building products consume substantial amounts of energy, water, and petrochemicals during manufacture, but they can make up for it in the operations phase. The same should be expected from architectural coatings.
| May 3, 2013
5 common failures in paints and coatings
As experienced designers, contractors, and owners know, most paint and coating problems are correctable, but some are especially stubborn to address. Here is a partial compendium of typical failure modes and methods for addressing the problem.
