flexiblefullpage -
billboard - default
interstitial1 - interstitial
Currently Reading

Mass timber: Multifamily’s next big building system

Wood

Mass timber: Multifamily’s next big building system

Mass timber construction experts offer advice on how to use prefabricated wood systems to help you reach for the heights with your next apartment or condominium project. 


By MIKE PLOTNICK, CONTRIBUTING EDITOR | April 13, 2022
Ascent will be the tallest mass timber (CLT and glulam) structure in the world
Ascent will be the tallest mass timber (CLT and glulam) structure in the world (25 stories, 284 feet) when it’s completed this August in downtown Milwaukee. The seventh-floor wellness center will have a pool with kitchen and bar, sauna, steam room, and fitness/wellness studios. The top floor will have floor-to-ceiling glass and two skydecks. Rendering: LCP360

Mass timber is poised to join concrete, steel, and light-wood framing as a primary structural material for multifamily projects. 

Mass timber construction involves the use of prefabricated wood components on a building’s load-bearing walls, roofs, floors, beams, and columns.

Its advocates say building with mass timber creates less waste, leaves a lighter carbon footprint (because wood sequesters carbon), and can be quicker and quieter than other construction modes. Some go so far as to claim that exposed wood has tangible health and wellness benefits for building occupants. 

Europe has been at the forefront of the movement; hundreds of mass timber office buildings dot the continent. In North America, mass timber adoption has been constrained by code restrictions that made it financially impractical, especially for multifamily projects. 

That situation may be changing. “Architects and developers are becoming increasingly interested in the technology,” said Mitch Warren, who represents Kalesnikoff, a Canadian mass timber supplier.

That interest is being fueled by the 2021 edition of the International Building Code, which increased the maximum allowable height for mass timber structures in the U.S. to 18 stories. In Canada, the 2020 National Building Code allows wood buildings up to 12 stories high.

Mass timber for multifamily housing construction - Ascent - View from Kilbourn 2.jpeg
The project team for Ascent in Milwaukee includes: New Land Enterprises and Wiechmann Enterprises (developers); Korb + Associates Architects; Thornton Tomasetti (SE); JSD Professional Services (CE, surveying); Arup (fire safety consultant); Swinerton Mass Timber (CLT/glulam procurement); Catalyst–C.D. Smith (CM/GC JV). Rendering: Korb + Associates Architects

California, Maine, Oregon, Utah, Virginia, and Washington have adopted the IBS update in some form, as have Denver and Austin, Texas. Georgia, Idaho, and Wisconsin are in the process of adopting the new IBC height allowances.

Other jurisdictions are expected to follow their lead, paving the way for a new generation of tall mass timber residential buildings to rise across the urban America landscape.

Several trailblazing residential mass timber projects have been completed or are under construction in the U.S.:

  • Carbon 12, an eight-story structure housing 14 condominiums; it opened four years ago in Portland, Ore.
  • The Canyons Apartments, six stories and 65 feet in height, with 70 ADA-compliant apartments, also in Portland; it opened in 2020.
  • Railyard Flats, a four-story (3-over-1), 41-unit rental property in Sioux Falls, S.D.; it opened last September.
  • INTRO, a 297-unit tower in Cleveland, started leasing earlier this year; at nine floors over a two-story podium, it will briefly hold the record as the tallest mass timber residence in the U.S. 
  • T3 Eastside, a heavy timber office/residential complex with 15 boutique lofts, under construction in Austin, Texas.
  • Ascent, a 25-story apartment tower in Milwaukee which, upon completion this August, will be the world’s tallest mass timber structure (284 feet), surpassing Mjøstårnet in Brumunddal, Norway (277 feet).
     

ADVICE FROM LEADING MASS TIMBER CONSTRUCTION PRACTITIONERS

We asked architects, builders, and developers involved in “big timber” work to share their advice and insights. Here’s what they told us. 

Make sure big timber pencils out. There’s a tipping point, around six stories, below which other construction methods, notably light-frame and post-tensioned concrete, are usually more economical than mass timber. “Building a five-story apartment building out of mass timber carries a sizable cost premium that most developers probably couldn’t justify,” said Laura Hollier, AIA, LEED GA, an architect at Nashville design firm Hastings.

Jason Korb, AIA, Principal at Korb + Associates Architects, the design firm for  Ascent, said, “I don’t believe anything less than 10 stories has a fighting chance to beat post-tensioned concrete.”

Mass timber for multifamily housing construction - Carbon12 dining room w person.jpeg
After failing to win the 2014 U.S. Tall Wood Building Prize, architect/developer Kaiser+Path went ahead anyway and completed Carbon 12 in 2018, in Portland, Ore. They worked with state and local officials to get code restrictions on mass timber residences waived. The 85-foot-tall structure is anchored with a CoreBrace buckling-restrained brace. Douglas fir was used for columns, beams, and exposed CLT panels. Reclaimed spruce-pine-fir infested by the mountain pine beetle was used within the Douglas fir panels, with no negative impact on panel strength. Photo: Andrew Progue

But Ben Kaiser, Founder of Kaiser + Path, the designer/developer of The Canyons Apartments, said that project’s 5-over-1 structure proved economical. “The additional cost is offset because mass timber construction requires fewer workers and can be up to 25% faster,” he said.

Engage code officials early. “Have the building department and the fire marshal in the room at the start, along with the planning department,” said John Mitchell, LEED AP BD+C, Associate Partner, Hartshorne Plunkard Architecture (HPA), the design firm for INTRO.

Wiss, Janney, Elstner, the fire consultant on INTRO, used extensive approved fire-testing documentation to make the case for the building’s safety, but “it took 18 months of meetings to get approvals” from code authorities in Cleveland, said Mitchell.

State officials in Wisconsin required 14 fire resiliency tests of Ascent’s structural decks, beams, and columns before they would grant a variance from the state’s building code, which does not permit mass timber high-rises. As a result of the positive experience with Ascent, Wisconsin authorities are preparing draft guidelines that would allow mass timber structures under the statewide building code.

Get your supplier and installer on board from the start. “Each manufacturer’s product varies in wood species as well as panel sizes and thicknesses, so unless you select the manufacturer on the front end, it is hard to efficiently design the superstructure,” said Hollier.

The vast forests of Douglas fir in British Columbia and the Pacific Northwest are home to numerous suppliers. Southern yellow pine is becoming a source of cross-laminated timber. SmartLam has such a CLT plant in Dothan, Ala., and Structurlam, the big Canadian supplier, is building its first U.S. CLT factory in Conway, Ark.

Europe also has experienced suppliers. INTRO’s timber came from from an Austrian supplier, Binderholz. Ascent’s glulam came from Wiehag; its CLT, from KLH, both Austrian. StuctureCraft sourced the DLT glulam beams and columns for Railyard Flats from another Austrian firm, Hasslacher, just before the Covid pandemic jacked up lumber prices. “We got lucky on the timing,” said Anne Haber, who, with her father, Jeff Scherschligt, President of Pendar Properties, developed the 41-unit rental project in Sioux Falls, S.D.

Mass timber for multifamily housing construction - Carbon12 exterior night.jpeg
Carbon Twelve Condominiums Owners Assn. (owner); Kaiser Group (developer/GC); Path Architecture (architect); Munzing Structural Engineering (SE); Portland Mechanical Contractors (HVAC, electrical); D+F Plumbing (PE); Patriot Fire Protection (fire protection); Otis Elevator (vertical transportation); Structurlam (mass timber provider); Timberland Inc. (wood framing/structural steel); Imagine Energy (solar energy); Cedar Landscape Construction (landscape). Photo: Andrew Progue  

Select wood from sustainable sources. The two most well-known certification systems are the Forest Stewardship Council (FSC) and the Sustainable Forestry Institute (SFI). 

Take advantage of wood’s physical attributes. Because mass timber weighs about one-fifth that of concrete, it can produce valuable efficiencies. “On Ascent, we drove half as many piles as we would have  with concrete,” said Korb. Mass timber also has a high strength-to-weight ratio, which benefits seismic performance.

Advocates say building with mass timber is faster than building with concrete. “We were able to do 70,000 square feet of deck every five days on Ascent,” said Kolb. Kaiser Group’s Ben Kaiser also said it took just four carpenters five days for each floor of Carbon 12.  “That would have taken two-and-a-half weeks with concrete,” he said.

Foster team cohesion. The developer and the AEC team need to be pulling in the same direction. “A successful multifamily mass timber building takes ongoing collaboration to make it work,” said  Ted Panton, AIA, Principal and Design Director at GGLO. 

Plumbers, electricians, and key trades should be engaged early. “They will be interfacing with the structure much more than they do on a typical project, so it’s important to educate them, discuss options, and coordinate with them throughout the process,” said Jeff Morrow, Preconstruction Manager at Timberlab, the mass timber construction division of Swinerton.

Be prepared to referee MEP meetings. The biggest selling point for residential mass timber projects is the exposed wood in the living units and common areas. That beauty factor can complicate the routing of exposed HVAC ductwork and MEP systems. “We had to coordinate all the trades into a few small soffits and drop ceilings,” said Taylor Cabot, project manager on Carbon 12.  “In a typical 1,500-square-foot unit they were all vying for space in a 200-square-foot soffit.”

Mass timber for multifamily housing construction - INTRO - courtesy Harbor Bay RE Advisors.jpeg
INTRO opened in late 2021 across from the West Side Market in Cleveland’s Ohio City neighborhood. Its 297 apartments occupy nine mass timber residential floors over a two-story podium. Photo courtesy Harbor Bay Real Estate Advisors

MEP teams, BIM modelers, and timber suppliers have to coordinate early on the BIM model to minimize the number and size of MEP penetrations. “Because our panels were coming in from Austria, we had to predrill a lot of holes,” many of which proved to be redundant, said HPA’s Mitchell. “We wound up filling as many holes as we drilled.”

Address the acoustics. Controlling sound transmission between multifamily units in mass timber buildings can be a problem. A concrete or gypsum-based topping layer can be applied above the floor/ceiling assembly to improve acoustical performance while preserving the exposed wood ceiling for residents. Decouplers, such as floor underlayments and acoustic mats, can also reduce structure-borne vibrations and block sound transfer, said Kalesnikoff’s Warren.

For INTRO’s floors, 3/8-inch acoustic mats were placed on top of the CLT flooring panels, and 2-3 inches of concrete was poured on the mats. “You can’t hear a thing,” said Mitchell.

Protect the wood. Mass timber panels need to be protected from exposure to the elements during shipment and on the job site. “Make sure all the wood is dried out before it’s covered up,” said Hollier.

Recalibrate your construction waste. Building modules arrive at the job ready to be assembled, which can drastically cut construction waste on the site. “A superintendent on a mass timber job recently told me he had to send most of his trash bins away empty because so little waste had been generated,” said Tom Chung, FAIA, LEED AP BD+C, Principal at Leers Weinzapfel Associates, which designed the mass timber Adohi Hall student resident at the University of Arkansas.

Market wood’s human appeal. Railyard Flats, which occupies an old train switching yard overlooking the Big Sioux River, was fully leased in two months, largely to younger renters and seniors nearing retirement. “The timber was a huge marketing piece for us,” said Pendar Properties’ Haber. “Everybody liked the warmth of the wood.” 

Mass timber for multifamily housing construction - Railroad_Flats.jpeg
Pendar Properties and CO-OP Architecture  specified StructureCraft DLT panels and Hasslacher glulam posts and beams for Railyard Flats, a 62,000-sf apartment complex on the site of an abandoned rail switching yard in Sioux Falls, S.D. The three-story, 41-unit mass timber apartment structure sits atop a one-story concrete parking garage. Photo courtesy Pendar Properties

Dispel any rumors of timber’s flammability. Recent fire resistance tests demonstrate that CLT and related products have inherent fire-resistant properties and outperform code requirements. “Rather than flashing up like kindling in a campfire, it’s more like the big log that’s really hard to light,” said Hardy Wentzel, CEO of Structurlam Mass Timber Corporation. “When mass timber walls are protected with gypsum wallboard, as the code requires, they can achieve nearly damage-free performance from a fire.”

Check out possible financial incentives. There’s a growing list of grants and awards via the Timber Innovation Act, the USDA Wood Innovations grant program, and Softwood Lumber Board grants.  

MASS TIMBER INNOVATORS KEEP PUSHING THE  LIMITS

Mass timber pioneers are forging ahead with new projects. Pendar Properties’ father-daughter team of Scherschligt and Haber is developing a $225 million complex in Sioux Falls that will combine a concrete office tower and parking garage with a pair of six-story mass timber edifices totaling 236 rental units.

Korb + Associates has two mass timber enterprises in the works: 2700 Sloat, a 12-story, 400-unit condominium development in San Francisco that will reach 125 feet in height; and Adelaide Point, a 30-acre, $250 million development on Lake Michigan in Muskegon, Mich., that will include a six-story, 300-unit luxury condominium residence.

Mass timber is not going to replace concrete and steel, but “it has a place in the market” for residential buildings with a two-hour fire rating in the nine- to 15-story range, said HPA’s Mitchell.

Tim Gokhman, Managing Director, New Land Enterprises, is more optimistic about the technology. “Mass timber is doing for buildings what Tesla did for electric vehicles,” he said. “It’s beautiful, lighter, faster, more precise, and sustainable.”

Related Stories

Sponsored | Wood | Oct 24, 2017

Multifamily framers recommend AdvanTech® products for flat, even flooring base

With lengthy exposure time, reliably stiff, moisture-resistant subflooring is key in reducing risk of delays.

Green | Aug 11, 2017

A school’s sports hall is created entirely from bamboo

The building boasts a zero-carbon footprint and is naturally ventilated.

Codes and Standards | Jul 27, 2017

Five fire scenarios tested on full-scale mass timber building

Results will help inform code changes.

Industrial Facility | Jul 26, 2017

EGGER will invest $700 million to build its first U.S. manufacturing facility

The company says the new facility will create 770 jobs over the next 15 years.

Office Buildings | Jul 19, 2017

James Corner Field Operations, designers of the High Line, creates rooftop amenity spaces for three Dumbo office buildings

The new spaces range from about 8,500 to 11,000 sf and were added to Two Trees Management’s anchor office buildings.

Reconstruction & Renovation | Jul 18, 2017

Mortenson Construction incorporates 100-year-old barn into new Portland office space

Mortenson deconstructed the barn and repurposed it for the new space.

Codes and Standards | Jul 10, 2017

New mass plywood panel project moves ahead with federal grant

New material is substitute for concrete and steel in multi-story projects.

Wood | Jul 10, 2017

University of Idaho Arena plans to make timber a focal point

The project received a Wood Innovation Grant that will help spur construction of the Hastings + Chivetta-designed project.

Wood | Jun 13, 2017

The first timber high-rise in the U.S. set for construction in Portland

The building’s design, building materials, and commercial tenants are all focused on the key aspect of sustainability.

| Jun 13, 2017

Accelerate Live! talk: Next-gen materials for the built environment, Blaine Brownell, Transmaterial

Architect and materials guru Blaine Brownell reveals emerging trends and applications that are transforming the technological capacity, environmental performance, and design potential of architecture.

boombox1 - default
boombox2 -
native1 -

More In Category




halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021

 


Magazine Subscription
Subscribe

Get our Newsletters

Each day, our editors assemble the latest breaking industry news, hottest trends, and most relevant research, delivered to your inbox.

Subscribe

Follow BD+C: