flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Inclusive design for locker rooms: Providing equitable choice and access

Designers

Inclusive design for locker rooms: Providing equitable choice and access

Inclusive restrooms and locker rooms are a hallmark of human-centered design. Due to stigma and complacency, these spaces have been an overlooked design opportunity.


By Cassandra El‑Soudani | SRG Partnership | July 29, 2024
wide frame with a white locker room with wooden cabinets and benches and specific equipment
Photo courtesy AdobeStock

What would it look like if everyone who wanted to use a restroom or locker room could? SRG designers posed this question, and I joined the conversation to learn about the design process. The initial research regarded the history of public facilities and current iterations. Despite the ubiquitous human need for cleaning, grooming, and eliminating, who is served by public facilities and who is not often stimulate anxiety, debate, and conflict in the United States.

The current state of American public restrooms reflects how marginalized groups have advocated for inclusion in mainstream society. Civil rights movements led to improving access by creating Ladies’ Rooms to accommodate women in the workforce, desegregating bathrooms, challenging irrational fear of shared spaces with gay men during the HIV/AIDS crisis, and expanding accessibility through the Americans with Disabilities act.

Thanks to these activists, American restrooms have gotten better over the past 150 years, but many people are still excluded, because these facilities still don’t suit everyone’s needs:

  • Transgender, non-binary, and gender non-confirming individuals
  • Families who need diaper changing facilities, access to lower sinks for children’s handwashing, and/or to chaperone older children who still need assistance
  • Caregivers who provide physical and medical assistance and are a different gender from the care-receiver
  • Overlooked ADA challenges like sink heights and wet counters that drip in wheelchair users’ laps
  • People with medical conditions (such as urinary problems and autoimmune diseases)
  • Paruresis and parcopresis (phobias of public toilets)
  • Religious people seeking ablutions (such as foot-washing) before prayer
  • Overloaded lines for one gendered room while the other is underutilized


How can these spaces be safe, efficient, and provide the greatest value for all users?

The current inclusivity solution is to maintain exclusive Men’s and Women’s rooms while occasionally providing a separate, single-occupancy room to accommodate all “others.” This is not exactly a thoughtful design and doesn’t go far enough to solve the problem of access. While it’s better than nothing, it further stigmatizes anyone who’s not accommodated by existing facilities by sending the message: you don’t fit in here, so go over there, or just go away.

Inclusive restrooms and locker rooms are a hallmark of human-centered design. Due to stigma and complacency, these spaces have been an overlooked design opportunity. The groundbreaking work at Stalled! is an inspiring stride to transform the status quo of public facilities.

The team at SRG focused their attention on reimagining how locker rooms can better support users.

  1. Respectively, women’s and men’s locker rooms don’t offer many amenity differences, making them ideal to consolidate
  2. Locker rooms are complex: toilets, showers, changing rooms, and personal secure storage
  3. Locker rooms are social environments where families and friends mix before engaging in recreational and fitness activities


How can locker room design create an environment that supports human health and vitality?

At the collegiate level, integrating gender inclusive locker rooms has been gaining traction. It stands to reason as various collegiate facilities have been gender-neutral for many years, such as restrooms in residence halls. A standard design that’s emerged is a central bank of lockers, surrounded by private toilet, shower, and changing rooms.

The team inverted this concept by centralizing the private zone and locating shared space along the sides, lining up with entrances and exits. This strategy presents many opportunities to balance shared and private zones and increase efficient use of the space.

Concept for an inclusive locker roomFloorplan for an inclusive locker room

A scalable, modular approach

The layout is built on a scalable, modular approach. The modules are stackable, so the selection of private rooms can be scaled to specific user groups and space constraints, and rows can be lengthened or added.

This layout can be tailored to various facilities like collegiate facilities, but also community centers, private gyms, and corporate environments.

Detailed view of private locker room modules

Efficient adjacencies

A highlight of SRG’s model is that lockers have close adjacencies to the central bank of private rooms. Each row of private rooms offers a variety of toilet, shower, and changing rooms, so a user doesn’t have to walk all around the locker room to access the amenities they need. After a user enters the facility and selects a locker, they have access to the central core to wash hands at the sink or utilize a private room.

Many traditional locker room designs compartmentalize amenities: bathrooms in one section, changing rooms and showers in another, vanity counters and mirrors in yet another, etc. This concept to cluster activity zones can decrease efficiency by making it necessary for users to move around the entire room to use each amenity and inevitably leads to overcrowding zones during rushes.

Imagine an aerobics class of fifteen students in SRG’s locker room concept. Everyone will arrive at approximately the same time and follow the same general cadence of using a changing room, locking up personal items, using a toilet, washing their hands, and then the reverse after class finishes and they prepare to leave the locker room. Additionally, they won’t be the only user group in the locker room. In a typical design with grouped amenities, this causes crowding at nearly every step (not enough space in front of the lockers, a line for the toilet, congested pathways as people pause to socialize, and so on.)

SRG’s concept encourages people to spread out, because all lockers have convenient access to the central private zone users need for toilets, showers, changing rooms, and sinks. This innovative layout can positively impact overcrowding during rush times due to equitable choice and access as you can see from the diagram below which illustrates 40 people easily mingling in the shared facility.

Example of 40 individuals utilizing an inclusive locker room

Privacy

A nuance to this design is creating a sense of privacy even in a shared space with high visibility. In a locker room surrounded by private rooms that open-up directly into the shared area, when a user enters or exits a toilet room, they do so on display to everyone in the room.

By placing the private zones within corridors, even though they still have a high degree of visibility, a user doesn’t feel like they’re walking directly from a toilet room into a large, shared space full of people. The circulation space in the private zone adds subtlety to a shared space while still preserving user choice, flexibility, and overall visibility.

Social connection

Another consideration was how a locker room can integrate into the social fabric of a building. The long circulation routes could connect the locker room to amenities throughout the building as opposed to being a closed off room. For example, the locker room could be a connective pathway between a pool room, a cafeteria, multipurpose rooms, meeting rooms, gymnasiums, and workout rooms. Passing through the locker room can be an integral part to how users interact with the building and further enhance the sense of shared space.

To emphasize this opportunity, the designers added a communal space at one end of the floorplan. It acknowledges that fitness facilities fill an important social role, and the design encourages efficient use of locker facilities by designating a cohesive gathering zone.

This design concept was a reimagining of the locker room experience but without a particular client or a specific location in mind. It’s a conceptual approach that starts to answer the question stated at the top of this essay: What would it look like if everyone who wanted to use a locker room could? It would look open, efficient, safe, and dignified.

The designers I worked with for this project were passionate and curious problem-solvers, and they recognize when standards are insufficient. When I first joined the team, what I couldn’t imagine as possible for locker room design was effectively re-imagined and continues to be internally iterated upon. This process has reminded me that when we prioritize human-centered design, we can learn to expand our expectations beyond the status quo.

More from Author

SRG Partnership | Mar 6, 2023

Benefitting kids through human-centric high school design

Ingrid Krueger, AIA, LEED AP, shares why empathetic, well-designed spaces are critical in high schools.

SRG Partnership | Aug 10, 2022

Increasing the skilled workforce through career technical education

There is a shortage of skilled workers in the United States, a gap that has only gotten wider with the advent of COVID.

SRG Partnership | Aug 8, 2022

Mass timber and net zero design for higher education and lab buildings

When sourced from sustainably managed forests, the use of wood as a replacement for concrete and steel on larger scale construction projects has myriad economic and environmental benefits that have been thoroughly outlined in everything from academic journals to the pages of Newsweek.

SRG Partnership | Jun 9, 2016

Designing for interdisciplinary communication in university buildings

Bringing people together remains the main objective when designing academic projects. SRG Design Principal Kent Duffy encourages interaction and discovery with a variety of approaches. 

SRG Partnership | May 21, 2015

How CLT wood construction affects project cost

SRG Partnership's Emily Dawson shares insights on the installation, availablilty, and cost of cross-laminated timber (CLT) construction, based on the firm's recent project at the Oregon Zoo.

SRG Partnership | Apr 9, 2015

How one team solved a tricky daylighting problem with BIM/VDC tools, iterative design

SRG Partnership's Scott Mooney describes how Grasshopper, Diva, Rhino, and 3D printing were utilized to optimize a daylighting scheme at Oregon State University's new academic building.

SRG Partnership | Mar 23, 2015

Drones for AEC: How every stage of a building project can benefit from drone technology

From photo-mapping to aerial progress videos, SRG Partnership's Dmitriy Molla studies real-world applications for unmanned aerial vehicles.

SRG Partnership | Feb 9, 2015

The generalist architect vs. the specialist architect

The corporate world today quite often insists on hiring specialists, but the generalists have an intrinsic quality to adapt to new horizons or even cultural shifts in the market, writes SRG Partnership's Gary Harris.

SRG Partnership | Jan 5, 2015

Beyond training: How locker rooms are becoming more like living rooms

Despite having common elements—lockers for personal gear and high-quality sound systems—the real challenge when designing locker rooms is creating a space that reflects the attitude of the team, writes SRG Partnership's Aaron Pleskac.

SRG Partnership | Dec 18, 2014

In response to ultra-open and uber-collaborative office environments

Susan Cain’s bestselling 2012 book, "Quiet: The Power of Introverts in a World That Can’t Stop Talking" has made an impact on how we understand our current workforce, recognizing that at least one-third of the people we work with are introverts, writes SRG Partnership's Susan Gust.

boombox1
boombox2
native1

More In Category


Sustainable Design and Construction

Northglenn, a Denver suburb, opens a net zero, all-electric city hall with a mass timber structure

Northglenn, Colo., a Denver suburb, has opened the new Northglenn City Hall—a net zero, fully electric building with a mass timber structure. The 32,600-sf, $33.7 million building houses 60 city staffers. Designed by Anderson Mason Dale Architects, Northglenn City Hall is set to become the first municipal building in Colorado, and one of the first in the country, to achieve the Core certification: a green building rating system overseen by the International Living Future Institute.


3D Printing

3D-printed construction milestones take shape in Tennessee and Texas

Two notable 3D-printed projects mark milestones in the new construction technique of “printing” structures with specialized concrete. In Athens, Tennessee, Walmart hired Alquist 3D to build a 20-foot-high store expansion, one of the largest freestanding 3D-printed commercial concrete structures in the U.S. In Marfa, Texas, the world’s first 3D-printed hotel is under construction at an existing hotel and campground site.


University Buildings

Des Moines University Medicine and Health Sciences opens a new 88-acre campus

Des Moines University Medicine and Health Sciences has opened a new campus spanning 88 acres, over three times larger than its previous location. Designed by RDG Planning & Design and built by Turner Construction, the $260 million campus features technology-rich, flexible educational spaces that promote innovative teaching methods, expand research activity, and enhance clinical services. The campus includes four buildings connected with elevated pathways and totaling 382,000 sf. 

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021