flexiblefullpage -
billboard - default
interstitial1 - interstitial
catfish1 - bottom
Currently Reading

10 building projects win top steel engineering and architecture awards

Steel Buildings

10 building projects win top steel engineering and architecture awards

Held annually by the American Institute of Steel Construction (AISC), the IDEAS2 awards recognize exceptional structural steel projects across the country. The award is the highest honor for building projects by the structural steel industry in the U.S.


By American Institute of Steel Construction | May 5, 2016
steel building at Rutgers University School

The Rutgers University School of Business won a National Award for Projects $15 million to $75 million in the 2016 IDEAS2 awards

Ten structural steel building projects have earned national recognition in the 2016 Innovative Design in Engineering and Architecture with Structural Steel awards program (IDEAS2).

Conducted annually by the American Institute of Steel Construction (AISC), the IDEAS2 awards recognize exceptional structural steel projects across the country. The award is the highest honor bestowed on building projects by the structural steel industry in the U.S.

“The 2016 IDEAS2 winners demonstrate that innovation and creativity can be found on building projects of every size and description,” Roger E. Ferch, P.E., president of AISC, said in a statement. “Steel continues to provide excellent solutions for the entire design and construction team, from architects, engineers and developers to general contractors, fabricators and erectors.”

Categories are listed below. Each project was judged on its use of structural steel from both an architectural and structural engineering perspective, with an emphasis on:

  • Creative solutions to the project’s program requirements
  • Applications of innovative design approaches in areas such as connections, gravity systems, lateral load resisting systems, fire protection and blast
  • Aesthetic and visual impact of the project
  • Innovative use of architecturally exposed structural steel (AESS)
  • Technical or architectural advances in the use of the steel
  • The use of innovative design and construction methods.

The 10 IDEAS2 winners were chosen from nearly 100 submissions received from architectural, engineering and construction firms throughout the U.S.

The program also recognizes the importance of teamwork, coordination and collaboration in fostering successful construction projects. Awards for each winning project are presented to the project team members involved in the design and construction of the structural framing system, including the owner, architect, structural engineer, general contractor, and the steel detailer, fabricator, and erector.

The awards are presented to the team members at ceremonies held at each of the winning projects during the year. Here are the 2016 award-winning projects:

 

Projects Less Than $15 Million

 

steel building projectPhoto: David Sundberg-Esto. Click to enlarge.

National Award: American Physical Society, Ridge, N.Y.

Architect: Marvel Architects, New York

Structural Engineer: Gilsanz Murray Steficek, New York

General Contractor: T.G. Nickel & Associates, Ronkonkoma, N.Y.

Read more about the American Physical Society building here.

 

steel building project 2Photo: Juan Miró. Click to enlarge.


National Award: Vertical House, Dallas

Architect: Miró Rivera Architects, Austin, Texas

Structural Engineer: Datum Engineers, Austin, Texas

General Contractor: Withheld at Owner’s Request

Read more about the Vertical House here.

 

Hillary Rodham Clinton Children's Library and Learning CenterPhoto: Timothy Hursley. Click to enlarge.

Merit Award: The Hillary Rodham Clinton Children’s Library and Learning Center, Little Rock, Ark.

Architect: Polk Stanley Wilcox Architects, Little Rock, Ark.

Structural Engineer: Engineering Consultants, Inc., Little Rock, Ark.

General Contractor: East Harding Construction, Little Rock, Ark.

Read more about the Hillary Rodham Clinton Children’s Library and Learning Center here.

 

Riverwalk PavilionPhoto: Paul Crosby. Click to enlarge.

Merit Award: Principal Riverwalk Pavilion, Des Moines, Iowa

Architect: Substance, Des Moines, Iowa

Structural Engineer: Charles Saul Engineering, Des Moines, Iowa

General Contractor: Covenant Construction Services, Waukee, Iowa

Read more about the Principal Riverwalk Pavilion here.

 

 

Projects $15 Million to $75 Million


Nu Skin Innovation CenterPhoto: Nic Lehoux. Click to enlarge.

National Award: Nu Skin Innovation Center, Provo, Utah

Architect: Bohlin Cywinski Jackson

Structural Engineer: Magnusson Klemencic Associates, Seattle

General Contractor: Okland Construction, Salt Lake City, Utah

Read more about the Nu Skin Innovation Center here.

 

Rutger's University School of BusinessPhoto: TEN Arquitectos. Click to enlarge.

National Award: Rutgers University School of Business, Piscataway, N.J.

Design Architect: TEN Arquitectos, New York

Executive Architect: Richard Bienenfeld AIA, New Rochelle, N.Y.

Structural Engineer: WSP, New York

General Contractor: Century 21 Construction, River Edge, N.J.

Read more about the Rutgers University School of Business here.

 

 

Projects Greater than $75 Million

 

National September 11 Memorial Museum PavilionPhoto: Arup. Click to enlarge.

National Award: National September 11 Memorial Museum Pavilion, New York

Architect: Snøhetta, New York

Architect: Adamson Associates International, New York

Structural Engineer: BuroHappold Engineering, New York

General Contractor: Bovis Lend Lease, New York

Read more about the National September 11 Memorial Museum Pavilion here.

 

Mariposa Land Port of EntryPhoto: Bill Timmerman. Click to enlarge.

Merit Award: Mariposa Land Port of Entry, Nogales, Ariz.

Architect: Jones Studio, Phoenix

Structural Engineer: Bakkum Noelke Consulting, Phoenix

General Contractor: Hensel Phelps, Phoenix

Read more about the Mariposa Land Port of Entry here.

 

Presidential Award of Excellence in Engineering

 

Emerson College Los AngelesPhoto: Elizabeth Daniels. Click to enlarge.

Emerson College Los Angeles, Los Angeles

Architect: Morphosis, Culver City, Calif.

Structural Engineer: John A. Martin & Associates, Inc., Los Angeles

General Contractor: Hathaway Dinwiddie Construction Co., Los Angeles

Read more about the Emerson College Los Angeles here.

 

 

Jury Recognition — Sculpture/Art Installation Category

 

The GourdPhoto: Patrick Winn. Click to enlarge.

The Gourd, San Antonio, Texas

Architect: Overland Partners, San Antonio

Structural Engineer: Datum Engineers, San Antonio

General Contractor: Overland Workshop, San Antonio

Read more about The Gourd here.

Related Stories

| Nov 7, 2014

Prefab helps Valparaiso student residence project meet an ambitious deadline

Few colleges or universities have embraced prefabrication more wholeheartedly than Valparaiso (Ind.) University. The Lutheran-based institution completed a $27 million residence hall this past summer in which the structural elements were all precast.

| Nov 6, 2014

Demountable structural steel could up the ante on sustainability

Demountable structural steel assemblies would be a greener way to make use of steel in the construction industry than recycling.

| Nov 3, 2014

AISC seeks entries for 2015 IDEAS2 Awards

These prestigious awards recognize outstanding achievement in engineering and architecture on structural steel projects across the country. 

| Aug 13, 2014

Sixth Annual SteelDay Set for Sept. 19

Hosted by AISC and its members and partners, SteelDay offers free events throughout the country for AEC professionals, faculty and students and the public to see firsthand how the vibrant U.S. structural steel industry works to build our country's buildings and bridges. 

| Jul 14, 2014

Foster + Partners unveils triple-glazed tower for RMK headquarters

The London-based firm unveiled plans for the Russian Copper Company's headquarters in Yekaterinburg.

| Jul 1, 2014

China's wild circular skyscraper opens in Guangzhou [slideshow]

The 33-story Guanghzou Circle takes the shape of a giant ribbon spool, with the floor space housed in a series of boxes suspended between two massive "wheels." 

| Jun 18, 2014

Arup uses 3D printing to fabricate one-of-a-kind structural steel components

The firm's research shows that 3D printing has the potential to reduce costs, cut waste, and slash the carbon footprint of the construction sector.

| Apr 9, 2014

Steel decks: 11 tips for their proper use | BD+C

Building Teams have been using steel decks with proven success for 75 years. Building Design+Construction consulted with technical experts from the Steel Deck Institute and the deck manufacturing industry for their advice on how best to use steel decking.

| Feb 14, 2014

Must see: Developer stacks shipping containers atop grain silos to create student housing tower

Mill Junction will house up to 370 students and is supported by 50-year-old grain silos.

| Feb 11, 2014

World's first suspended bicycle roundabout [slideshow]

Located in the Netherlands, the project was designed to promote a healthier lifestyle. 

boombox1 - default
boombox2 -
native1 -

More In Category




halfpage1 -

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021